BLR`s Safety Training Presentations

Transcript BLR`s Safety Training Presentations

PPE: Foot Protection

Session Objectives

You will be able to: • • • • Identify foot hazards Choose appropriate footwear for work tasks Know the limitations of foot protection Use and take care of protective equipment © Business & Legal Reports, Inc. 0704

Foot Injury Statistics

• 180,000 foot-related injuries • • • 400 injuries per day $6,000 per injury 1,509 lost-time injuries © Business & Legal Reports, Inc. 0704

Foot Hazard Review

• • • • Falling objects Rolling objects Objects piercing the sole Exposure to electrical hazards © Business & Legal Reports, Inc. 0704

Other Foot Hazards

• Slippery walking surfaces • • • Wet or muddy conditions Hazardous chemicals Cold weather conditions © Business & Legal Reports, Inc. 0704

Falling Objects

• • • Steel toe Composite cap Strap-on toe guards © Business & Legal Reports, Inc. 0704

Metatarsal Protection

• Protection from falling and rolling objects for upper part of the foot • • Boots with external protection Strap-on metatarsal guards © Business & Legal Reports, Inc. 0704

Rolling Objects

• • • • Ankle protection Steel shank in the heel Sides protected by steel shanks Toe and metatarsal protection © Business & Legal Reports, Inc. 0704

Puncture Resistant

• Prevent penetration by sharp objects • • Have a hard, dense sole Have steel shank in the sole © Business & Legal Reports, Inc. 0704

Slip Resistant

• Street shoes are not intended for slip resistance • Soft rubber soles are slip resistant • Sole has tread with channels • Still need to walk carefully © Business & Legal Reports, Inc. 0704

Electrical Hazards

• • • Wear nonconductive shoes Reduce potential electrical shock Exposure to 600 volts or less © Business & Legal Reports, Inc. 0704

Electro-Static Dissipative

• • • Reduce static electricity • • Conduct charge from body to ground Have low electrical resistance Wear around flammable or explosive materials Wear near sensitive electronic equipment © Business & Legal Reports, Inc. 0704

Conductive Shoes

• • • • Minimize static electricity Reduce ignition of volatile chemicals Discharge static into grounded floors Should not be worn near electrical hazards © Business & Legal Reports, Inc. 0704

Chemical Resistance

• Exposure to liquid chemicals, acids, caustics • • Boot material resistant to specific chemical Made of rubber, PVC, neoprene, or vinyl © Business & Legal Reports, Inc. 0704

Wet or Muddy Conditions

• • Boots to keep feet dry Made of PVC or rubber © Business & Legal Reports, Inc. 0704

Cold Conditions

Use a special insulated liner in: • Freezing outdoor conditions • Refrigerated environments © Business & Legal Reports, Inc. 0704

Foot Hazards and Footwear —Any Questions?

• Any questions about workplace hazards to your feet and the different footwear features that will protect against those hazards?

Capabilities and Limitations

Comfort and Fit

• • Fit and comfort Plantar fasciitis and heel pain • Ankle, knee, low back pain • • Insoles Orthotics © Business & Legal Reports, Inc. 0704

Cleaning Footwear

• • Brush off dust and debris • • Spray mud off with water Decontaminate chemical-resistant shoes Dry before storage © Business & Legal Reports, Inc. 0704

Storing Footwear

• • • Clean before storage Protect from dirt and chemicals Prevent unnecessary damage © Business & Legal Reports, Inc. 0704

Inspecting Footwear

• • • • • Inspect before each use Check toe and metatarsal protection Check for holes, tears, cracks Check soles for excessive wear Discard damaged or defective footwear © Business & Legal Reports, Inc. 0704

Limitations, Use, and Care —Any Questions?

• Any questions about the limitations, use, and care of protective footwear?

Key Points to Remember

• • • • • Know the foot hazards in your workplace Wear footwear with appropriate protective features for the job Know the capabilities and limitations of protective footwear Check comfort, fit, and support of footwear Clean, store, and inspect footwear © Business & Legal Reports, Inc. 0704