Transcript Building Mission Critical Cloud Infrastructure: Lessons

Building Mission Critical
Cloud Infrastructure: Lessons
Learned At Scale
Eric Westfall
Systems Engineer, DataYard
Who We Are
•
Managed service provider specializing in mission-critical cloud
infrastructures
•
CLEC, blend connectivity with cloud services to produce unique
capabilities for our clients
•
No commodity services, all we do is five nines
•
Small team, big impact. Achieve large scale results through
automation and development
•
Trusted to architect and host some of the most critical, highest
demand applications in our region
Getting On The Same Page
•
Asked to define what "the cloud" is, a plurality (29%) of
Americans cited some type of weather-related term (e.g., the sky, or
an actual cloud).
•
When asked whether they believed inclement weather could interfere
with cloud computing, 51% of Americans answered yes.
•
In this presentation, cloud refers to virtualized infrastructure providing
compute, network and storage resources together with agile and
resilient network services to provide a robust IaaS platform.
Versatile Infrastructure Platform
Versatile Infrastructure Platform
•
DataYard’s Infrastructure as a Service platform trusted to run our
critical infrastructure as well as mission-critical platforms for our
customers
•
Resilient and distributed. No single points of failure.
•
Agile networking services. Powerful load balancing, hardware and
virtualized firewalls. With layer 2 connectivity, bridge services on
internal client networks
•
Modular. Easily scale to increased capacity requirements. Additional
compute nodes can go from in the box to production in < 60 minutes.
•
Standards based. Programmable through vendor CLI/API and custom
written APIs.
Platform Evolution
•
Complex systems change; our platform has evolved dramatically since
initial deployment.
•
Flexibility and iteration are key. Don’t get so stuck trying to build the
perfect platform that you don’t deploy anything … perfect doesn’t
exist.
•
The outcome of small measured changes are easier to predict and
easier to recover from.
•
Our platform has gone through three significant evolutionary phases
and many smaller iterations.
Single EMC Storage Area
Network
Direct connectivity to core
Cisco 6905e switches,
dedicated Cisco 3750
stacked switches.
Publicly addressed
management network,
restricted via ACLs.
Cisco UCS C250
virtualization hosts
Standalone servers only, no
UCS fabric interconnects
ESXi installed on local disks,
no centralized images or
host profiles
Multiple EMC Storage Area
Networks (NS-120, VNX)
Redundant Cisco 5548
switches, numerous 2248
fabric extenders
Cisco UCS Platform
ESXi installed on local disks,
no centralized images or
host profiles
Cisco UCS Rack Servers
Dell Rack Mount Servers
Dell R905 virtualization hosts
Cisco UCS 5108 Blade
Chassis, UCS B200 M3 Blade
Servers
Stateless hosts, centralized
images distributed at boot
via vSphere Auto Deploy
Multiple EMC VNX, VNX2
Storage Area Networks
Redundant Cisco 6248UP
Fabric Interconnects
Redundant Cisco 5548
switches, numerous 2248
fabric extenders
Secured management
network behind dedicated
firewalls
Lessons Learned
B:4 S:0xfe31a00060080813 M:0xe00c0ffe01000000
A:0x1828485930 4
Machine Check Exceptions, Memory Errors or
How We Learned To Hate The Color Purple
•
Platform initially used clustered rack-mount Dell PowerEdge R905
servers (4 Quad-Core AMD Opteron 8356 processors, 128 GB Memory)
•
Began experiencing high volumes of single-bit and multi-bit memory
errors under heavy workload
•
6 fatal kernel errors (PSOD) in 9 months all precipitated by hardware
faults (machine check exceptions in processors, unrecoverable
memory errors)
•
VMware and Dell agreed root cause was hardware … eventually.
•
Agreeing on resolution was not so easy. Replaced two processors, one
partial and two complete sets of memory DIMMs, a motherboard and
eventually an entire server chassis.
What We Learned
•
Some hardware just doesn’t hold up under extremely large or complex
workloads. Even when it is the largest platform offered by a vendor.
•
Don’t underestimate the ability of your vendors to blame each other.
Escalate to the smartest engineers available and then get them on the
phone together.
•
Even the most thorough hardware diagnostics can fail to uncover
issues; some issues can only be discovered under real world workload.
•
Admitting is the first step. When you run into a platform limitation,
change direction. Don’t succumb to vendor lock-in.
MSCS Clustering (Part 1) - Round Robin Path
Selection and RDM LUNs
•
Default path selection behavior favors interface failover not load
balanced I/O performance.
•
Troubleshooting storage performance in these environments is
complex enough – in some configurations, fixed path selection can
result in random path changes after reboots further complicating
troubleshooting.
•
Huge I/O performance gains when using round robin path selection
but can cause issues in Microsoft Clustering environments.
•
Prior to vSphere 5.5, round robin path selection with MSCS was not
supported and would break shared storage when LUNs were mapped
as RDMs.
What We Learned
•
Path selection policy decisions should be made at individual LUN levels
and not simply applied to all LUNs
•
Microsoft clustering using native iSCSI and LUNs mapped as RDMs is just
awful in vSphere versions prior to 5.5 … more on that later
•
Pay attention to graphs and performance metrics, active/passive
failover is nice but redundancy and performance gains are even
better.
MSCS Clustering (Part 2) – Improved Boot
Performance With Perennial Reservations
•
MSCS performs storage arbitration using SCSI-3 reservations
•
The vSphere storage subsystem attempts to discover all devices
presented to an ESXi host during the device claiming phase
•
MSCS RDM LUNs with a reservation placed on them from an active
MSCS node hosted on another ESXi host prevent the booting host from
interrogating the LUN.
•
Use the supported flag to mark RDM LUNs participating in MSCS
clusters as perennially reserved so the storage subsystem skips LUN
interrogation during device claiming
•
83% host boot time reduction on average (41 minutes -> 6.5 minutes)
What We Learned
•
Did I mention MSCS using native iSCSI and LUNs mapped as RDMs
sucks … cause it does.
•
Using in-guest iSCSI software initiators with MPIO is a much better
shared storage alternative to native RDM LUNs and reduces overall
complexity
•
Don’t ignore performance issues or assume long boot times are normal
just because these are big servers with tons of memory or a lot of LUNs
to discover.
Fabric Extender Buffering, Queue Limits and Tail
Drops
•
The Cisco Nexus 2248TP fabric extender uses a shared packet buffering
scheme where 8 host interfaces (HIF) map to a single ASIC with 800 KB
N2H; 480 KB H2N.
•
Buffers are needed where speed mismatch occurs, as in all network
designs and in particular when the bandwidth shifts from 10 GB to 1 GB
(N2H).
•
If the host interface is congested, traffic is dropped according to the
normal tail-drop behavior.
•
Default queue tail-drop threshold of 64 KB N2H, can be removed to
allow each HIF to access full shared memory buffer (dependent on
number of NIFs configured).
What We Learned
•
Pay close attention to the specifications of your switching fabric, dig
deep into architectural details and capabilities.
•
Block storage traffic is bursty and doesn’t play well in limited shared
packet buffering architectures. Make sure you have a large enough
shared buffer to deal bursty traffic and speed changes.
•
Cisco now manufactures specialized fabric extenders (i.e. 2248TP-E)
optimized for big-data deployments and distributed storage. 32 MB
shared buffer space, not dependent on the number of NIFs, default
queue limit 1 MB H2N.
Distributed Virtual Switch Maximum Heap
Allocation
•
Issues running distributed virtual switches at large scale deployments;
dropped virtual machine network connectivity, errors when powering
on virtual machines.
•
Errors in vmkernel log: “Failed to get DVS state from vmkernel Status
(bad0014)= Out of memory”; “Unable to Add Port; Status(bad0006)=
Limit exceeded”; “WARNING: Net: vm 735381: 4454: cannot enable
port 0x4000037: Out of memory”
•
Resolved by increasing the large heap maximum allocation size for the
distributed virtual switch.
•
Was a “non-public” bug, now publicly disclosed (2034073).
What We Learned
•
Vendors (especially VMware) withhold bugs from public disclosure …
lots of them. Maintain partnerships and support contracts since you
can’t always guarantee your issue is on the knowledgebase.
•
Centralized logging from your hosts is crucial; review vmkernel logs for
obscure bugs and track down abnormal errors
•
For some issues, there just isn’t a best practice recommendation
available. VMware still does not publish recommended port maximums
as they relate to heap values. Official recommendation is to contact
support if you reach the maximum heap value of 128 and still have
issues.
Final Thoughts
•
Things break, unexpectedly … focus on mean time to recovery not
mean time between failure
•
Distributed systems are inherently complex; favor simplicity wherever
you can find it.
•
Eat your own dog food, build a platform you trust to run your critical
infrastructure. And hey, if you’re building it for yourself … why not sell it?
•
Iteration, iteration and more iteration. What you build will change, I
guarantee it. Embrace change, incorporate lessons learned and
continuously improve the platform.
Questions?
More info:
Eric Westfall
[email protected]
(800) 982-4539
http://datayardworks.com