Step Temporary Abutment

Download Report

Transcript Step Temporary Abutment

Temporary Abutment

Temporary Abutment

Concept Intended use  For NC (Narrow Crossfit ™ Connection) and RC (Regular Crossfit ™ Connection)  Screw- or cement-retained temporary  single crowns Cement-retained temporary bridges   Component materials Temporary Abutment (Polymer, Ti) Basal Screw (TAN)* Benefits  Easy chair-side modification  Esthetic temporization  High flexibility  Stability and precision *TAN is one type of titanium alloy material

Education STRAUMANN

NC RC

2

Important

 Restoration can remain in mouth for up to 6 months only  Temporary restoration must be out of occlusion  Modification:  Radially max. 0.5 mm for NC and 1.0 mm for RC  Vertically max. 6.0 mm (maintain at least 5.0 mm polymer height)

STRAUMANN Education 3

Temporary Abutment

Option A

 Screw-retained temporary restoration

Option B

 Cement-retained temporary restoration A

STRAUMANN

B

Education 4

Diagnostic wax-up and lab impression STRAUMANN Education 5

Option A. Screw-retained restoration

Steps:  Modify temporary abutment  Roughen upper section of abutment  Use heatless wheels and new carbide burs  Work with low rpm, little pressure

STRAUMANN Education 6

Option A. Screw-retained restoration

 Hand-tighten individualized abutment into implant or model  Seal screw channel (e.g., with composite)

STRAUMANN Education 7

Option A. Screw-retained restoration

 Direct veneer the abutment with vacuum-formed sheet technique and fill with acrylic  Remove excess acrylic  Polish finished crown

STRAUMANN Education 8

Option A. Screw-retained restoration

 Re-open the screw channel  Tighten temporary crown between 15 - 35 Ncm  Cover screw head (e.g., with absorbent cotton)  Seal screw channel (e.g., with composite)

STRAUMANN Education 9

Option B. Cement-retained restoration

 Modify temporary abutment (no undercuts!)  Roughen upper section of abutment  Use heatless wheels and new carbide burs  Work with low rpm, little pressure

STRAUMANN Education 10

Option B. Cement-retained restoration

 Isolate modified abutment  Fabricate cementable crown on top (e.g., build up with composite)

STRAUMANN Education 11

Option B. Cement-retained restoration

 Place customized abutment onto implant  Tighten temporary crown between 15 - 35 Ncm  Cover screw head (e.g., with absorbent cotton)

STRAUMANN Education 12

Option B. Cement-retained restoration

 Cement crown using temporary cement

STRAUMANN Education 13