Transcript Document
0.3 mm pitch, 0.9 mm above the board
Top and bottom contact
Back-flip actuator, flexible printed circuit ZIF
0.5 mm pitch, 2 mm above the board
Flip-lock actuator, ZIF connector
Reliable connectivity and robust structure
Horizontal mating, single-contact
Current capacity rated up to 6 Amps (22 AWG)
Smallest no-housing connector, compact and low profile
10+Gbps 0.5mm pitch stacking
Ground plates improve transmission efficiency
0.5 mm pitch and high contact reliability
0.4 mm contact pitch, space-saving
Drop and shock resistant structure
Two point contact structure encloses plug contacts
Space-saving, miniature 0.4mm pitch, high mating retention
Multiple stacking heights from 1.5mm to 4.0mm
Self-aligning guide rib and shock absorbent structure
4 Amp micro hybrid board to FPC
0.3mm self-mating alignment with tactile click
Two-point contact structure for power and signal
Low profile - 1.5mm pitch, 1.8mm mated height
4 Amps with 24 AWG (2 power lines); 3-6 positions
Vertical mating with positive and friction locking
Compact space-saving 3.96mm pitch, 1-6 positions
15 Amps rated current with 16 AWG
Right-angle, vertical and in-line variations
Slim, sleek design for wiring in small spaces
3 types: standard (DF62B), protected (DF62C), and panel
mount plug (DF62P)
Available in 3, 4, 5, 6, 7, 13 and 24 positions
Slim, sleek design for wiring in small spaces
Water-resistant after crimped contact is inserted in housing
Available in 2, 3, 4, 6 and 9 positions
Double-row contact configuration, 2mm pitch
Wire-to-board, board-to-board and in-line types
2 Amps with 22 AWG, 30 V AC
2-point contact system, 25mm to 45mm stacking height
2 Amps rated current, 300 V AC
Wide selection of mounting types and contact positions
Compact rectangular solderless connector for racks & panels
3 Amps for power lines, 300 V AC, 2.54mm pitch
Available in 8, 12, 16, 24, 32 and 40 positions
3-piece structure, stacking heights from 18mm to 40mm
100, 200, & 300 positions + 110% additional grounds
Differential, single-ended, and power in one package
Power pin 3-piece connector, variable interposer heights
60 Amps rated current, 300 V, 2 positions
Designed for assembly in conjunction with IT3 and IT5 series
High-Speed SMT mezzanine connector supporting 10+ Gbps
0.5 mm pitch / stacking height 15mm to 38mm
Wide self alignment, anti-buckling structure
Ultra-small coaxial connectors - 1.9mm to 2.4mm mated height
Receptacle board area: 7.7mm2
High frequency up to 6GHz, & a V.S.W.R. of 1.3 to 1.5 max.
2.4 mm coaxial connector conforming to MIL-STD-348B Standard
Supports up to 50 GHz frequency with 25Gbps
Screw mounting to PCB provides enhanced performance
Durable and robust, featuring 20,000 mating cycles
Thick metal shell over the contact housing
18 contact positions with sequential mating
Micro USB 3.0 compliant interface connector, 1 to 10 positions
Transmission speed up to 5 Gbps, compatible with micro USB2.0
High wrenching force strength, 10,000 mating cycles
Small and robust bayonet lock connector
IP68 waterproof, electrical shielding structure
Three series: LF07, LF10, LF13 from 3 to 20 contact positions
Small size, high density with easy push-pull locking
Designed for EMI prevention
Supports high speed applications such as 100BASE-TX
IP68 weather-resistant waterproof connector for outdoor use
Sequential contact structure for hot swap capability
15 kV of electrical surge protection, 3 and 5 contact positions
Small waterproof push-on bayonet lock connectors
Oil-proof and waterproof structure - IP68 compliant
Straight and right angle types, 4 and 10 contact positions
Built-in pulse transformer modular connector
Mis-insertion prevention mechanism
Satisfies 100 Base-TX and 10 Base-T requirements
Foldable Open-Close RJ-45 Modular Jack
RJ-11 Plug Mis-Insertion Prevention Structure
Secure grounding structure
IP67 waterproof bayonet lock, built-in SC / LC connectors
Active Latch in SC / LC connectors
200 mating cycles
Ultra small optical connector with bayonet lock
Water (IP67) and vibration resistant, for harsh environments
Many product variations (attachment and cable types)
Plug-in connector for storage batteries, 100 to 300 Amps
Multiple contact springs on power contact decrease heat
Hybrid design with 100 to 300 Amps power & signal contacts
Single position snap-in lock power connector
Rated up to 90 Amps using 22mm2 cables
Keying and colored housings prevent mis-wiring
Small wire-to-board connector for high-power applications
Rated up to 45 Amps current capacity with 8 AWG
Straight, right angle and in-line types, 1 to 6 contact positions
1.5 mm pitch, high speed shielded wire-to-board connectors
Unique 2-point contact structure on crimp contact
Supports HDMI1.4, LVDS and USB3.0 signal transmission
High-speed transmission shielded connector with positive lock
Transmission up to 1 Gbps, secure lock structure
Single and double row, straight, right angle & down angle types
LAN signal connectors for railway and industrial applications
4 positions in 1 port type, 8 positions in 2 port type
Rugged structure – withstands high vibration and shock
40 position connector rated up to 600 V
Space-saving double & quadruple-row types support VME rack
3-point contact design with high-conductivity material