Transcript Improved Design

F1 Commercial & Light Industry Printer
ISO 9001:2000
All rights reserved. Copyright © 2008 Argox Information Co., Ltd
www.argox.com
Product Strategy : Primary Features
4.17-inch(106mm) direct thermal/thermal transfer printer
203 dpi print resolution and up to 6-ips(152mm/s) printer speed
32 bit CPU and 4 MB Flash; 8 MB SDRAM memory standard
Multiple communication interface-parallel, serial, USB&PS/2
Up to 15,000 labels output per day, Baud rate is 115200 bps
Enhanced media sensor function-reflective
and transmissive
Add head-open sensor and built-in
buzzer warning system
Back-lit LCD display, LED and button
operation interface for easy-to-use
Side-open cover and clear media
window, built-in Tear off bar
www.argox.com
Product Strategy : Primary Features
No ribbon wrinkle with centralized thermal print head
360M ribbon & 8-inch media compartment
Inside/outside ribbon auto-switch and centralized ribbon & label path
Enhanced cutter and peeler module design for quick maintenance
Stand-alone operation through PS/2 interface
PPLB emulation and one binary file
firmware more fast upgraded
Enhance Auto-form function
Add 1D/GS1 & 2D/QR barcode
Soft fonts are downloadable
(Up to 72 points)
Full range of options : Cutter,
Dispenser, RTC card, Stacker
Font card, Argokee,
www.argox.com
Product Strategy : Technical Details
Category
Concept
Technical Details
Twin-Eyed Sensor System & Light Pipe Design
Unique Media Guide Lock & Floating Reflective Sensor Design
User
Friendly
Ribbon Inside/Outside Auto-Switch Technology
Buzzer Warning System
New
Design
LCD & LED Operating Display
TPH Pressure Adjustable Design
Quick
Maintain
Roller Quick Installation
Cutter & Peeler Module Design
Flexible Media Holder & Shaft
Shaft Media Design For Stabilizing Paper Loading
Improved
Design
User
Friendly
Head Open Sensor
Bracket Metal Lock & Linking Lever
One-Button Calibration Function
Quick
Maintain
Cutter Jam Detecting Sensor
Backfeed Function
Skip to Product Application
www.argox.com
Product Strategy : Technical Details
• New Design
Twin-Eyed Sensor System & Light Pipe
Design For Detecting Label Gap
Effectively
Unique Media Guide Lock & Floating
Reflective Sensor Design
Ribbon Inside/Outside Auto-Switch
Technology
Buzzer Warning System
LCD & LED Operating Display
TPH Pressure Adjustable Design
Roller Quick Installation
Cutter & Peeler Module Design For
Ease Of Use
www.argox.com
Twin-Eyed Sensor System
Twin-eyed Sensor System : no.1 centralized &
no.2 fixed in left side
Default is no. 1 centralized transmissive sensor
The LED light pipe for detecting label gap effectively
Front of printing module
Back of printing module
www.argox.com
Twin-Eyed Sensor System
The benefits of Twin-Eyed Sensor System (Transmissive Sensor)
For 1-inch width label situation
1-inch width label such as
Wristband in
healthcare
application
For hole label situation
For notch label situation
Select No.1 transmissive sensor
to detect the hole on label
Select No.2 transmissive sensor
to detect the notch on label
www.argox.com
Unique Media Guide Lock &
Floating Reflective Sensor Design
Right & left side media guide, and unique holder
lock design to stabilize the paper in printing situation
Floating reflective sensor design for closing to the
backing paper reinforces precise gap detection
Push the black button and then adjust the
media guide to fit the paper width
www.argox.com
Ribbon Inside/Outside
Auto-Switch Technology
According to ribbon supply and receive to Install ribbon on printer,
and then print
Easier to use and no need to remember how to install
inside/outside ribbon
Ribbon
receive
Ribbon
supply
www.argox.com
Buzzer Warning System
All of fail situations happened, Buzzer will beep to be a warning
and fail message also be shown on panel
Turn-off Buzzer : Select Authorised Setup1 / ALERT BUZZER
function from panel to turn-off Buzzer
• Print label when head open
• Head open alert phenomenon
3 beeps
Alert - Red light flash
LCD – head open
• Cutter jam problem
www.argox.com
LCD & LED Operating Display
3 level selection for user friendly
• 2 × 16 line LCD
•LED indicators × 2
•Button × 6
Basic Setup
Authorised Setup 1
Authorised Setup2
www.argox.com
TPH Pressure Adjustable Design
New lock way design for easier
and quick to replace TPH
TPH pressure
adjustable and default
is the lowest pressure
Front TPH
horizontal position
adjustable design
www.argox.com
Roller Quick Installation
Quick and easy to install and replace roller
18mm bigger size roller for better printing quality
www.argox.com
Cutter & Peeler Module Design
Module design for Ease of use
Peeler Module :
Lock the screw × 2
Link the connector
Cutter Module : (Baby-board built inside)
Link the connector
Lock into hole on
the printer
Lock the right and left screw × 2
www.argox.com
Product Strategy : Technical Details
• Improved Design
Flexible Media Holder & Shaft
Media Shaft Design
Head Open Sensor
Bracket Metal Lock & Linking Lever
One-Button Calibration Function
Cutter Jam Detecting Sensor
Backfeed Function
www.argox.com
Product Strategy : Technical Details
• Improved Design
– Flexible Media Holder & Shaft for loading 1-inch
and 3-inch core and adjust width
– Media Shaft Design for stabilizing paper loading
www.argox.com
Product Strategy : Technical details
• Improved Design
– Cutter Jam Detecting Sensor for solving cutter
jam problem
Jam detecting sensor
•
When cutter jam, the fail message will be shown on panel, stop
printing and Buzzer sounding
•
Turn off Buzzer function : Authorised Setup 1 level / ALERT BUZZER
– Backfeed Function
•
•
Cutter or Peeler mode available to set up with
or without backfeed function
Options on panel :
Authorised Setup 2 level / ADVANCED CUT
Authorised Setup 2 level / ADVANCED PEEL
www.argox.com
Product Strategy : Technical details
• Improved Design
– Head Open Sensor
Sensor
bar to control sensor
– Bracket Metal Lock & Linking Lever
Metal Lock
before
push the button
Head open
– One-Button Calibration Function : only push
feed button, no re-calibration required when
change media size,
www.argox.com