Transcript PPRC Presentation Size

PHOENIX
AUTHORISED DEALER IN BHARUCH
DISTRICT.
CONTACT:- 9978829228 OR 02646-252031
GENERAL
PROPERTIES OF
PP-RC:1) FULL FORM OF PP-RC
2) TEMPERATURE
WITHSTAND
3) PRESSURE WITHSTAND
4) VALIDITY OF JOINT
GAURANTEE
5) WELDING PROCESS
FACILITY
4/13/2015
1) POLYPROPYNE RANDOM
CO-POLYMER PIPE.
2) TEMPERATURE:- -4*C TO
+95*C.
3) PRESSURE:- UPTO
20KG/CM2 AGAINST
TEMPERATURE/PRESSURE
4) ATLEAST 10-15 YEARS LIFE
EXPETANCY FOR JOINT
GAURANTEE.
5) SOCKET FUSION WELDING
MACHINE PROCESS
MAIN CHARACTERISTICS OF PP-RC
•
Noise
The material’s elasticity and high insulation capacity mean a considerable reduction in the noise of the installation even
when there is water hammering.
•
Welding capacity
This is fundamental characteristic of the system. It enables all the elements in the system to be joined by poly-fusion welding
or the use of electric coupling.
•
Portability
The ANJNEY’s system is in full compliance with the international standards on the use of plastic materials for the
transportation of drinking water.
•
Head loss
The internal surface of the pipes and fitting are smooth so limestone or other deposits cannot form and head loss is reduced
to the minimum.
4/13/2015
MAIN CHARACTERISTICSOF PPRC:•
Versatility
The low specific weight means easy of transport and handling.
The system can be used in traditional site installation, for the preparation of prefabricated constructions and in the creation
of modules or fitted walls.
•
Energy saving
The reduced heat dispersion in association with a low thermal inertia , allow to supply hot water even if the pipe has not yet
reached the average working temperature . The energy saving is in the range of 10% to 20%.
•
Resistance to abrasion and corrosion
This characteristic allows high flow velocities of the transported fluid .up to 7m/s, without any problem of erosion, even in
the presence of acid and alkaline substance with PH values between 1 and 14.
•
Low conductivity of the heat
Since PP-R is a poor conductor of heat , condensation and heat dispersion of the transported fluid are considerably reduced
•
Resistance to frost
The typical elasticity of PP-R permits the enlargement of the pipe section under the thrust of the volume increase due to
freezing of the conveyed liquid.
•
.
4/13/2015
INDUSTRIAL APPLICATIONS :-
4/13/2015
PRODUCT RANGE - PHOENIX
4/13/2015
RESIN SPECIALITIES' FOR RANDOM
CO-POLYMER:•
ANJNEY GETS A SPECIAL GRADE RAW MATERIAL OF PP FROM ONE OF THE WORLD’S
LARGEST POLYMER MANUFACTURING COMPANIES LIKE BASELL. THROUGH CONTINUOUS
RESEARCH AND DEVELOPMENT, AND AFTER USING CERTAIN ADDITIVES AND SPECIFIC
PROCESS, ANJNEY HAS DEVELOPED AND ENHANCED A SPECIAL GRADE OF PPRC.
•
THIS SPECIAL GRADE HELPFUL LIKE VERY LESS THERMAL CONDUCTIVITY, COMPARED TO
OTHER METAL AND POLYMER PIPES. THROUGH THIS ENHANCED VERSION, ANJNEY HAS
MANUFACTURED PPRC HEAT SAVING PIPES FOR PREVENTING HEAT LOSS AND SAVING
ENERGY.
4/13/2015
WHAT IS ANJNEY PPRC HEAT SAVING
PIPES ?
4/13/2015
WALL THICKNESS OF PP-RC PIPES:NOMINAL
DIAMETER
PN-10KG/CM2
MIN-MAX
PN-16KG/CM2
MIN-MAX
PN-20KG/CM2
MIN-MAX
20MM
1.90 - 2.30
2.80 - 3.30
3.40 - 4.00
25MM
2.30 - 2.80
3.50 - 4.10
4.20 - 4.90
32MM
2.90 - 3.40
4.40 - 5.10
5.40 - 6.20
40MM
3.70 - 4.30
5.50 - 6.30
6.70 - 7.60
50MM
4.60 - 5.30
6.90 - 7.80
8.30 - 9.40
63MM
5.80 - 6.60
8.60 - 9.70
10.50 - 11.80
75MM
6.80 - 7.70
10.00 - 11.60
12.50 - 14.00
90MM
8.20 - 9.30
12.30 - 13.80
15.00 - 16.70
110MM
10.00 - 11.20
15.10 - 16.90
18.30 - 20.40
160MM
14.60 - 16.30
21.90 - 24.30
26.60 - 29.50
4/13/2015
PIPE SELECTION CHART :TEMP DEG C*
PN-10KG/CM2
PN-16KG/CM2
PN-20KG/CM2
10
19.1
30.2
38.0
20
16.3
25.8
32.4
30
13.7
21.7
27.3
40
11.5
18.4
23.0
50
9.8
15.5
19.5
60
8.2
12.8
16.2
70
6.2
9.8
12.3
80
3.9
6.2
7.7
95
2.7
4.1
5.2
4/13/2015
AGAINST METALLIC PIPES, PROVES
SUPERIOR :•
IT IS A TENDENCY OF ALL INDUSTRIES THAT THEY MOSTLY USE METAL PIPES (MS, GI, CI, SS)
FOR EACH AND EVERY APPLICATION, WHETHER FOR HOT OR COLD TEMPERATURE.
WHEREAS ANJNEY HAS DEVELOPED PPRC HEAT SAVING PIPES FOR DIFFERENT
APPLICATIONS, THROUGH CONTINUOUS RESEARCH AND DEVELOPMENT, AND THROUGH
PRACTICAL EXPERIENCE. FROM THE YEAR 2003 TO 2005, WE HAVE GIVEN FREE
INSTALLATIONS IN MANY DIFFERENT INDUSTRIES AND TESTED THE SUITABILITY OF OUR
PRODUCT PRACTICALLY. THEN ENHANCING OUR PRODUCT ACCORDINGLY.
•
WE INTRODUCED THE SAME INTO MARKET. ANJNEY OFFERS PPRC HEAT SAVING PIPES
WITH A CHALLENGE TO SAVE UP TO 60 % ENERGY, IN BOTH COLD AND HOT APPLICATIONS.
SO IT IS SUITABLE FOR ANY TYPE OF CORROSIVE FLUID, CHEMICAL OR WATER.
• R E S U LT: -
IN THE LAST 2-3 YEARS PHOENIX HAS COMPLETED 100 SUCCESSFUL
INSTALLATIONS IN VARIOUS CHEMICAL, PHARMACEUTICALS AND DIES INDUSTRIES.
4/13/2015
AGAINST G.I.PROPERTIES :-
4/13/2015
U.V.STABILISED CHAPTER FOR OUTDOOR APPLICATION [SUN
PROTECTION LAYER]:-
4/13/2015
ACTUAL PERFORMANCE IN
CORROSIVE ATMOSPHERE:-
4/13/2015
4/13/2015
4/13/2015
SCRUBBER
PIPELINES BY CONVERTING THE HDPE PIPING
4/13/2015
D.M.WATER PLANT – PPRC PIPES & FITTINGS.
4/13/2015
PPRC PIPING FOR SUCTION PUMP CUM HEADER
4/13/2015
VARIOUS CHEMICAL PIPING – PPRC PIPES & FITTINGS
TURNKEY PROJECTS – ETP PIPING BY REPLACING THE HDPE
4/13/2015
PIPING
4/13/2015
GNFC LIMITED – D.M.WATER PLANT PIPING
(REPLACING HDPE PIPING)
GNFC LIMITED – FRP TANK PPRC PIPING CONNECTION
4/13/2015
HEAT EXCHANGER PLANT – PPRC-PPCH PIPES & FITTINGS AT
4/13/2015
BLUSTAR LIMITED
REMI METAL GUJARAT LIMITED-4 YEARS BEFORE
4/13/2015
INSTALLATION
4/13/2015
PP-RC PIPES & FITTINGS HEADER PART-I
4/13/2015
PPRC PIPES & FITTINGS HEADER PART II
4/13/2015
PPRC PIPES & FITTINGS HEADER PART-III
EFFULENT WATER TRASFER PIPING AT ETP PLANT
4/13/2015
4/13/2015
VARIOUS
BRANCHES FROM ONE PPRC HEADER FOR ETP
4/13/2015
PUMP TO DISCHARGE PPRC PIPELINES
S
INFACT, WE HAVE THREADED PARTS IN PPRC FITTINGS FOR
4/13/2015
PRESS.GAUGE & TEMP.GAUGE
FABRICATION WAS ON FOR PPCH PIPES & FITTINGS WHILE
4/13/2015
CAPTURE
WAS DONE AT FIRST CARBON TECHNO-DAHEJ
4/13/2015
AUTHORISED DISTRUBUTOR FOR BHARUCH DISTRICT