Transcript to presentation - Archimed Projects Malta

THERMAL
INSULATION
TECHNOLOGY
Lightweight thermal insulating mortar
21 April 2010
Politerm: a successful transfer of theory to practical
 Superlight inert made of EPS vergin
beads preadditivated with EIA (Edilteco
Insulating Additive)
 Suitable for the preparation of
lightweight – thermal insulating mortars
 To be mixed with cement and water,
NO SAND REQUIRED
 Preadditivated at the factory =
constancy of use and final results
Lightweight thermal insulating mortar
21 April 2010
Politerm: a successful transfer of theory to practical






Perfect mixing with the water binder
Homogeneous distribution within the mixture
Light: just as low as from 200 kg/m3!
High thermal insulation: λ = 0,067 W/Mk
Perfect pumping capacities
Prevention of the polystyrene beads from
floating.
TECHNICAL
DATA SHEET
MANUAL
OF USE
Lightweight thermal insulating mortar
POLITERM
INTERMEDIATE LAYER
AND PIANO ZERO
(230)
POLITERM
ROOFING
AND FCA (215)
21 April 2010
Thermal insulation
on roofs
Politerm applications
Thermal insulation in
attics
Thermal insulation
and lightening on
floors
single-layer
Thermal insulation
and lightening and
levelling on floors
intermediate layer
under screed
Thermal insulation
for basements
-single-layer
-intermediate layer
under screed
Lightweight thermal insulating mortar
21 April 2010
Politerm applications
Thermal
insulation,
lightening and
gradient
formation on
terraces
single-layer
Lightweight thermal insulating mortar
21 April 2010
Politerm applications
Thermal
insulation,
lightening and
gradient
formation on
terraces
Intermediate
layer under
screed
Lightweight thermal insulating mortar
21 April 2010
Politerm applications
Thermal insulation,
lightening and
gradient formation
on flat roofs
under waterproofing
layer
Lightweight thermal insulating mortar
21 April 2010
Politerm applications
Thermal insulation,
lightening and
levelling
intermediate layer
under floor heating
system
Lightweight thermal insulating mortar
21 April 2010
Politerm applications
Lightweight thermal insulating mortar
Thermal
insulation,
lightening
and
levelling
on vaulted
floors
21 April 2010
POLITERM
Politerm: preparation
POLITERM
THE LIGHTWEIGHT THERMAL INSULATING MORTAR
NO SAND IN THE MIXTURE
+
CEMENT
+
CLEAN
WATER
Lightweight thermal insulating mortar
21 April 2010
Politerm: preparation
Cement mixer (*)
(*): 200 litres packaging
recommended
Lightweight thermal insulating mortar
Truck mixer (**)
(**): 500 litres packaging
recommended
21 April 2010
Politerm equipment
POLITERM MACHINE
 Suitable for mixing and pumping
of lightweight mortars
 Capacity: 10-12 m3 /h of mortar
 Tank: 1000 lt
 Pumping distance: 120 m
horizontally and >30 m vertically
 Electrical power 7,5 kW – 380 V
 Weight: 800 kg
Other versions:
- With automatic dosage of water
- Diesel engine
HIGH PRODUCTIVITY !
Lightweight thermal insulating mortar
TECHNICAL
DATA SHEET
21 April 2010
Politerm equipment
ISOLCAP MACHINE
 Suitable for lightweight mortars
and selflevelling mortars
 Capacity: 3 m3 /hour of mortar
 Tank: 260 lt
 Pumping distance: 50 m
horizontally and 25 m vertically
 Electrical power 6 kW – 380 V
 Weight: 128 kg
VERSATILE AND PORTABLE !
Lightweight thermal insulating mortar
TECHNICAL
DATA SHEET
21 April 2010
Politerm equipment
POLITERM PUMP
 Suitable for pumping of premix
lightweight mortars
 Capacity: 500 litre/minute
 Tank: 200 lt
 Pumping distance: 120 m horizontally
and 60 m vertically
 Electrical power: 7,5 kW – 380-220 V
 Weight: 300-350 kg
POWERFUL AND RELIABLE !
Lightweight thermal insulating mortar
TECHNICAL
DATA SHEET
21 April 2010
Politerm equipment
POLITERM BLOW READY MIX
 Suitable for blowing of Politerm into
the truck mixer
 Capacity: 750 litre/minute
 Tank: 760 lt
 Pumping at 4 m high
 Electrical power: 0,75 kW – 380 V
 Weight: 300 kg
PRACTICAL AND QUICK !
Lightweight thermal insulating mortar
21 April 2010
Politerm based Readymix products
VERTICAL WALLS
AND CEILING
Lightweight thermal insulating mortar
HORIZONTAL INSULATION
AND LIGHTENING
21 April 2010
Readymix: vertical walls and ceilings
ISOLTECO
 Lightweight and Highly thermal insulating
plaster
 Composition: EPS virgin beads and
special additives
 λ = 0,058 W/m°K
 Density: 150 kg /m3
 Compressive resistance: 1,07 N/mm2
 μ = 12,67
 Sound insultaion: 7dB at 6 cm thickness
 Application: with plastering machine
TECHNICAL
DATA SHEET
Lightweight thermal insulating mortar
MANUAL
OF USE
21 April 2010
Readymix: vertical walls and ceilings
ISOLTECO
SUITABLE FOR THE INSULATION OF:
1.CEILING
2.EXTERNAL WALLS
3.ELIMINATION OF THERMAL
BRIDGES
4.IN-BETWEEN WALLS*
5.INTERNAL WALLS
1. Thermal insulation on ceiling
2. External thermal insulation
3. Elimination of thermal bridges
4. Thermal insulation in-between walls
5. Internal thermal insulation
*ISOLTECO WALL (0,42 N/mm2)
Lightweight thermal insulating mortar
21 April 2010
Readymix: vertical walls and ceilings
ISOLSAN
 Dehumidifying plaster, lightweight and
with high thermal insulating properties
 Composition: EPS virgin beads and
special additives
 λ = 0,068 W/m°K
 Density: 230 kg /m3
 Compressive resistance: 1,28N/mm2
 μ = 9,0
 Bag: 60 lt yeld
 Application: with plastering machine
TECHNICAL
DATA SHEET
Lightweight thermal insulating mortar
MANUAL
OF USE
(Isolteco)
21 April 2010
Readymix: vertical walls and ceilings
ISOLSAN
SUITABLE FOR THE INSULATION OF:
1.CEILING
2.EXTERNAL WALLS
3.ELIMINATION OF THERMAL
BRIDGES
5. INTERNAL WALLS
1. Thermal insulation on ceiling
2. External thermal insulation
3. Elimination of thermal bridges
Lightweight thermal insulating mortar
5. Internal thermal insulation
21 April 2010
Isolteco (Isolsan): preparation
ISOLTECO
(ISOLSAN)
THERMAL INSULATING PLASTER
+
CLEAN
WATER
ISOLTECO (44 e 440)
Lightweight thermal insulating mortar
21 April 2010
Isolteco (Isolsan): preparation
MIXING
(Manual application)
MIXING AND PUMPING
(mechanical application)
HELICOIDAL
FULL BLADE
30 LT
ROTOR-STATOR
CEMENT MIXER
Lightweight thermal insulating mortar
PLASTERING MACHINE
21 April 2010
Readymix: horizontal insulation and lightening
Lightweight thermal insulating mortar
21 April 2010
Readymix: horizontal insulation and lightening
Thermal insulation on roof
Lightweight single layer
screed with slope creation
Lightweight thermal insulating
layer on wood slab
Lightweight thermal insulating
layer under heating floors
Lightweight thermal insulating mortar
Lightweight single
layer screed for
terraces and balcony
Lightweight thermal
insulating single layer for
cercamic screed
Lightweight, thermal
insulating underfloor layer
Levelling and lightweight
filling for thermal insulation of
vaults ceilings
21 April 2010
Readymix: horizontal insulation and lightening
ISOLCAP ISOLCAP
FEIN
ISOLCAP
SPEED
ISOLCAP
XX
ISOLCAP
MAX
Underscreed
layer
Single layer screed
Fast drying
Reinforced with
polypropilene fibres
for improved
mechanical
resistance
High compression
resistance
Density
250 kg/m3
300 kg/m3
400 kg/m3
500 kg/m3
800 kg/m3
Thermal
conductivity
0,067 W/m°K
0,087 W/m°K
0,095 W/m°K
0,104 W/m°K
0,176 W/m°K
Compressive
strenght
0,83 N/mm2
1,61 N/mm2
1,48 N/mm2
2,24 N/mm2
4 N/mm2
μ
11,5
12
21,04
21,04
-
ceramic tile= 96 h
wooden floor=7 days
ceramic tile= 24 h
wooden floor=48 h
ceramic tile= 96 h
wooden floor=5 days
ceramic tile= 96 h
wooden floor=5 days
Feature
NOTE: direct
application of
Lightweight thermal insulating mortar
21 April 2010
POLITERM: SUMMARY OF MAIN ADVANTAGES
 Using a higher performance material means obtain savings in
terms of:
 Material consumption
 Weight
 Space (reduced thickness)
 Time
 Furthermore, due to its lightness, it contributes to
considerably reduce the earthquake effect at the buildings
Lightweight thermal insulating mortar
21 April 2010
THERMAL
We warmly
Thank You
for your attention
INSULATION
TECHNOLOGIES
Lightweight thermal insulating mortar
Grazie
21 April 2010