Transcript 3.60 CEREC Connect inLab Import

3.60 CEREC CONNECT LAB IMPORT
3.60 CEREC CONNECT LAB IMPORT
Open the CEREC 3.60 inLab
software and click on the Connect
icon.
3.60 CEREC CONNECT LAB IMPORT
Enter your User Name and
Password in the Internet
Portal Access box.
3.60 CEREC CONNECT LAB IMPORT
Locate the file that you
are wanting to download
and click on the View
hyperlink.
3.60 CEREC CONNECT LAB IMPORT
After clicking on view the
Restoration Data tab will
open. Here you will find the
restoration information for
the case. It will display the
patient name, restoration
type, material that is to be
used and the stump and
final shade. The model will
also indicate the tooth
number by displaying it in a
highlighted blue. Once
familiar with the data, click
Next Step to proceed.
3.60 CEREC CONNECT LAB IMPORT
The Desired Lab tab will
now display, information
listed here will indicate
your lab name and also
the Return Date the case
should be done by. Click
on the Next Step icon at
the bottom right to
continue.
3.60 CEREC CONNECT LAB IMPORT
In
the Additional Notes
tab you will find the
patients gender and
age along with any
patient photos that
may have been sent.
Also you will have any
Additions Instructions
the office may have for
this case. Click Next
Step to continue.
3.60 CEREC CONNECT LAB IMPORT
Before clicking on the
accept or reject buttons at
the bottom, click on the
hyplerlink for the
restoration file that was
sent. The file will
download and open so it
can be determined which
button to select after the
file is reviewed.
3.60 CEREC CONNECT LAB IMPORT
After clicking on the
restoration file hyperlink
the download progress
box will display. We
recommend to check
mark the box to
Automatically Close After
Successful Download.
3.60 CEREC CONNECT LAB IMPORT
When the download is
complete, it will load the
file automatically. At this
step, click on the
appropriate active
buttons in your view box
to check the different
models that are present
for the restoration. After
viewing the images and
the model, click on the
green arrow, it will bring
us back to the order form
so we can accept or
reject the case.
3.60 CEREC CONNECT LAB IMPORT
Once the green arrow is
clicked it will bring you
back to the Accept/Reject
Order tab. At this point
click on the Accept or
Reject button. There is a
Your Comments text box
located on this screen, if
the file is accepted enter in
any comments you have
for the office. If you have
chose to reject the order,
indicate here why it was
rejected. After you accept
or reject the case an email
will automatically be sent
to the office stating if it has
been accepted or why it
has been rejected.
3.60 CEREC CONNECT LAB IMPORT
If Accept is selected it will
confirm the order has been
accepted and will give you
two hyperlinks to click on,
Work Ticket and the
Restoration File. Click on
the work ticket so it can
either be saved or opened
to be printed. The work
ticket has the patient,
restoration and additional
notes information
pertaining to the case.
3.60 CEREC CONNECT LAB IMPORT
When the Work Ticket
hyperlink is chosen, click
on Open if you want to
view the ticket, here you
will have an option to
print. Click on Save if you
would like to save it to a
location and view it at a
later time.
3.60 CEREC CONNECT LAB IMPORT
This is an example of the
work ticket. Included is
the information entered
in by the dental office
when filling out the
different tabs.
3.60 CEREC CONNECT LAB IMPORT
If you were to reject the
order, this sAgaincreen
would appear., this screen
only appears if you reject
the order. Click Close or the
Go Back To Your Order List
hyperlink button.
3.60 CEREC CONNECT LAB IMPORT
After printing or saving the
work ticket, close out of
the .pdf file and you will be
back to the accepted order
screen. Click the hyperlink
of the Restoration File to
begin working on the case.
3.60 CEREC CONNECT LAB IMPORT
The restoration will will
display and it will enter the
patient information into
your patient list, click OK to
continue.
3.60 CEREC CONNECT LAB IMPORT
Taking information from the
work ticket, select the
Restoration type, Design
Technique and select the
Tooth Number on the model.
Click OK.
3.60 CEREC CONNECT LAB IMPORT
The restoration file will load
to where the Doctor left off
before they clicked on the
connect button to send. They
will be trained to draw the
margin and then click
connect, so it should show a
drawn margin line in a
magenta color when it loads.
Rotate the model around to
confirm the margin has been
drawn correctly and has not
fallen off anywhere. If the
margin is correct, double click
somewhere on the magenta
line, it will now turn blue.
3.60 CEREC CONNECT LAB IMPORT
Make any edits to the margin
if needed, do not be too
critical, the automatic finder
is more accurate than manual
edits. When the margin line
is correct green arrow
forward.
3.60 CEREC CONNECT LAB IMPORT
Make any edits to the margin
if needed, do not be too
critical, the automatic finder
is more accurate than manual
edits. When the margin line
is correct green arrow
forward.
3.60 CEREC CONNECT LAB IMPORT
Redefine the insertion axis so
you are looking straight down
onto the prep and you do not
see one side more than
another. Make sure you can
see the margin all the way
around. After redefining the
insertion axis proceed as
usual to create the
restoration.