Transcript Step 1 - SimTek Fence

SimTek Fence
www.simtekfence.com
www.simtekfence.com
About Us
Founded in 2007, SimTek Fence has reinvented
fence manufacturing with its patented design of
rotationally-molded fencing allowing realistic
stone appearance and superior performance.
We are one of the fastest growing fence
manufacturer in the United States
Patented Construction
Every panel and post is manufactured by using
rotational mold technology.
Patented Construction
Our fence system is made with proprietary Linear Low
Density Polyethylene Plastic (LLDPE) and is reinforced
with galvanized steel.
17 High Strength gauge 1
½” squared galvanized
steel tube
Superior Wind Load Rating
SimTek Fence has been engineered to meet
and exceed the wind load requirements for
Miami-Dade County for hurricane force
wind loads.
- 110 mph sustained wind loads with a
maximum burst of 130 mph.
Excellent Sound Barrier
SimTek Fence
SimTek fence blocks 98% of direct sound
Our Sound Transmission Class Rating is
(STC) is 26
Fade Resistant
SimTek fence contains UV-12
inhibitors that allows the plastic
to maintain its original granite
color.
The fence will not fade or ever
change colors.
our new √
green
Greener Solution
(formula)
+
Rotomolding
=
SimTek Fence uses more than 200,000 lbs. of recycled polyethylene plastic.
No trees are cut down for the purpose of manufacturing our fence.
We recycle, regrind, and reuse all our polyethylene – we produce no
waste or plastic scrap.
Were possible, we use recycled packaging materials
Our fence is 100% recyclable.
Easy Installation
Step 1:
Dig holes 10” to 12” in
diameter and about 30”
to 36” deep in the
ground.
Step 2:
Attach the support
bracket in the groove of
the post at 73 ½”.
Easy Installation
Step 3:
Set post in concrete and
use metal stiffener to
space from post-to-post.
Step 4:
Make sure that post is
plumb and evenly spaced.
Metal Stiffener
Easy Installation
Step 5:
Once the concrete
cures, panels can
be installed by
sliding them in the
channel of the
post.
Cutting Panels
Step 6:
Panels can be cut to any
desired length.
a. Remove steel
stiffeners from panel.
Determine the exact
width between post
grooves. Mark and cut
stiffeners with a metal
blade.
b. Cut the panel to the
stiffener width minus
½” to allow for
thermal expansion
and contraction.
Easy Installation
Step 7:
Install caps over the post.
Caps are pressure fitted.
Recommendation:
Panels are universal with
no front or back and no
top or bottom edge.
Randomly installing
panels gives the most
pleasing aesthetic effect.
Stair Stepping Panels
Stair Stepping Panels
Concrete Surface Mounts
SimTek can be installed
on top of a 8” minimum
width poured concrete
wall or on a flat surface
by using our mounting
brackets.
EcoStone Colors
Eco Dark Brown
Eco Brown
Eco Beige
Eco Grey
Pro-Line Colors
Brown
Beige
Grey
Black
Desert
White
Residential Projects
6’ High
Residential Projects
3’ High with Ornamental
Residential Projects
Great Around Swimming Pools
HOA Projects
Home Owner’s Associations
(HOA)
Commercial Projects
6’ High
Commercial/Industrial Projects
8’ High