OBJ009202 MA5300 Broadband Access Equipment Operation and
Download
Report
Transcript OBJ009202 MA5300 Broadband Access Equipment Operation and
OBJ009201
MA5300 Broadband Access Equipment
Operation and Maintenance
ISSUE 1.0
Fixed Network Curriculum
Development Section
Objectives
Upon completion of this course, you will be able to:
Grasp the basic knowledge of command line
Grasp the basic system configuration
Grasp the basic service and function
configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
5 Multicast Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Command Line Basis
end
Login via
serial port
or TELNET
exit
Ordinary user
mode
enable
MA5300>
disable
Privilege
user mode
MA5300 #
Configure
terminal
exit
interface
ethernet 7/1/0
Global
configuration mode
MA5300(config)#
Ethernet port configuration mode
MA5300(config-if-Ethernet7/1/0)#
interface
adsl2/1/1
interface
vlan-interface 1
vlan 1
line 0
MA5300 command line mode
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VDSL port configuration mode
MA5300(config-if-adsl2/1/1)#
VLAN interface configuration mode
MA5300(config-vlan-interface 1)#
VLAN interface configuration mode
MA5300(config-vlan1)#
Line configuration mode
MA5300(config-line0)#
Command Line Basis
Command line help
By entering “?” ,
you can get list of commands with a brief
description under any command mode
MA5300#show ?
Key word matching
MA5300#conf<space> ---- MA5300#configure
Chinese/English language switching
MA5300#Terminal language
Access history commands
Access the previous history command: "Ctrl +P"
Access the next history command: "Ctrl +N"
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
5 Multicast Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
MA5300 control console provides two configuration modes:
Setting up local configuration environment via the Console
Local maintenance
Setting up configuration environment via Telnet
Local and remote maintenance
In-band Telnet: Occupying service channels
Out-band Telnet: Occupying no service channel
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
Setting up a local configuration environment via the Console
Connect the computer serial port with the MA5300 Console via a
standard RS232 serial cable, then configure hyper terminal in
Windows or other operation systems.
RS232 serial port cable
PC
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MA5300
Setting up Configuration Environment
Open the hyper terminal
Open-Program-Accessories-
Communications-Hyper terminal: Double click
Hypertrm. exe
Setting the HyperTerminal parameters
Enter the name:
MA5300(The name can be defined by
the user)
Connection use:
Directly connect to Serial port 1
(depending on actual conditions)
Port setting:
9600bit/s, 8 data bits, no parity check
1 suspension bit, no flow control
Terminal type:
Confidential Information of Huawei.
No Spreading without Permission.
VT100 or automatic test
Security Level: Internal
Setting up Configuration Environment
Setting up Configuration Environment via Telnet
workstation
LAN
server
workstation
MA5300
Telnet Terminal
LAN local Telnet mode
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
workstation
Local router
LAN
MA5300
Telnet terminal
WAN
LAN
WAN remote Telnet configuration mode
Remote router
workstation
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Setting up Configuration Environment
User login
Via the Console
After correctly connecting the hyper terminal, press Enter key
according to the prompt to enter the configuration environment
Via Telnet
According to the prompt, enter correct user name and password to
enter the configuration environment
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Out-band NM configuration
MA5300(config)#interface M-Ethernet 7/0/1
Enter the external network interface port mode.
MA5300(config-if-M-Ethernet7/0/1)#ip address 10.11.84.200
255.255.255.0
Configure the IP address of the external network interface
MA5300(config-if-M-Ethernet7/0/1)#no shutdown
Activate the external network interface
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
In-band NM configuration
MA5300(config)#interface Vlan-interface 1
Enter the Vlan-interface 1 configuration mode .
MA5300(config-Vlan-interface1)#ip address 10.11.84.200
255.255.255.0
Configure the equipment with a management address, which should
be configured on vlan virtual interface 1 .
MA5300(config-Vlan-interface1)#exit
MA5300(config)#ip route 0.0.0.0 0.0.0.0 10.11.84.1
Configure the equipment with a default route.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
SNMP network management configuration
MA5300(config)# snmp-server community public ro
MA5300(config)# snmp-server community private rw
Set the community name and access authority
MA5300(config)# snmp-server enable traps
Enable sending Trap
MA5300(config)# snmp-server host 10.11.1.254 version 1
private 。
Set the address of the destination host to which Trap information is
sent as 10.11.1.254, and the community name as private.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Operation terminal configuration
Adding a User
MA5300#terminal user name
Deleting a User
MA5300#no terminal user name
Modifying user level
MA5300#terminal user level
Modifying user password
MA5300#terminal user password
Modifying number re-entries
MA5300#terminal user reenter
Viewing User Information
MA5300#show terminal user
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Board Management
Query a Board
MA5300#show board 0
MA5300#show board 0/2
Add a board
MA5300(config)#board add 0/1 eada
Confirm a Board
MA5300(config)#board confirm 0
Delete a board
MA5300(config)#board delete 0/2
Reset a Board
MA5300(config)#board reset 0/1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Basic Maintenance Operations
Equipment management
Reset the system
MA5300(config)#reboot
Show CPU Occupancy Ratio MA5300>show cpu 0/7
Display the system time
Set the system time
MA5300> show time
MA5300#time HH:MM:SS YYYY/MM/DD
Display the system version
Setting hostname
MA5300(config)#show version 0/7
MA5300(config)#hostname MA5300
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
File system configuration
Display the current working directory
MA5300#pwd
Display directory or file information
MA5300#dir
Delete a file
MA5300#delete file-url
Recover a deleted file
MA5300#undelete file-url
Completely delete files in the recycle bin
MA5300#squeeze file-url
Display the content of a file
MA5300#more file-url
Rename a file
MA5300#rename fileurlsource fileurl-dest
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
Configure File Management
Query the initial configuration of the MA5300 intelligent IP integrated
access equipment
MA5300#show startup-config
Query the current configuration of the MA5300 intelligent IP
integrated access equipment
MA5300#show running-config
Save the current configuration
MA5300#write
Erase the configuration files in the Flash
MA5300#erase
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
FTP configuration
Serving as an FTP Server
Start the FTP Server
MA5300 (config) #ftp server enable
Set information on the authority of FTP user to access the FTP
server
MA5300(config)#user abc service-type ftp ftp-directory flash:
password 7 123
Query the FTP server configuration
MA5300(config)#show ftp-server
Query FTP users that have logged in
MA5300(config)# show ftp-user
Serving as an FTP Client:
Confidential Information of Huawei.
No Spreading without Permission.
MA5300#ftp X.X.X.X
Security Level: Internal
System Management Configuration
TFTP Configuration
Get file from the operation terminal
tftp get //10.77.212.102/abc.doc aaa.doc
put file to the operation terminal
tftp put aaa.doc //10.77.212.102/ccc.doc
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
Interface-number:
Format: slot No /sub-slot No /port No.
Example:
Ethernet 7/1/0, Adsl 2/0/1, Vdsl 3/0/23
Port Type
Slot No
Sub0slot No
Port No
FastEthernet
7,8
1,2
0-3
GigabitEthernet 7,8
1
0,1
ADSL
0-6,9-15
0
0-23
VDSL
0-6,9-15
0
0-23
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
Port configuration
Enter the port configuration mode.
MA5300(config)# interface Ethernet 7/1/1
Open the port
MA5300(config-if-Ethernet7/1/1)#no shutdown
Set the port as a Trunk port
MA5300(config-if-Ethernet7/1/1)#switchport mode trunk
Adding a VLAN that is allowed to pass through the Trunk port
MA5300(config-if-Ethernet7/1/1)#switchport trunk allowed vlan 3 to 4
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
System Management Configuration
Setting the default VLAN ID of a port
MA5300(config-if-Ethernet7/1/1)# switchport trunk native vlan 1
Adding the current port to a designated VLAN
MA5300(config-if-Ethernet7/1/1)# switchport access vlan 8
Querying the port property
MA5300(config)#show interface
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
5 Multicast Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VDSL Port Configuration
VDSL port configuration mode
MA5300(config)#interface vdsl3/0/0
MA5300(config-if-vdsl3/0/0)#
VDSL board configuration mode
MA5300(config)#board-vdsl 3
MA5300(config-board-vdsl3)#
Setting Port Priority Level
MA5300(config-if-Vdsl3/0/0)#priority 0
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VDSL Port Configuration
Unblocking a VDSL Port
MA5300(config-board-vdsl3)#no block all
Adding a VDSL line profile
MA5300(config)#vdsl line-profile add 2
(Refer to operation manual to see more detail)
Deleting a VDSL line profile
MA5300(config)#vdsl line-profile delete 2
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VDSL Port Configuration
Modifying a VDSL line profile
MA5300(config)#vdsl line-profile modify 2
Querying VDSL line profile
MA5300(config)#show vdsl line-profile 2
Activating a VDSL Port
MA5300(config-board-vdsl3)#activate all 1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
VDSL Port Configuration
Resetting a VDSL port
MA5300(config-board-vdsl3)#port reset 23
Viewing VDSL port information
MA5300(config-board-vdsl3)#show port state 23
MA5300(config)#show interface vdsl3/0/23
Viewing port line parameters
MA5300(config-board-vdsl3)#show line config 23
MA5300(config-board-vdsl3)#show line state 23
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
Entering ADSL port configuration mode
MA5300(config)#interface adsl11/0/0
Entering ADSL board configuration mode
MA5300(config)#board-adsl 11
MA5300(config-board-adsl11)#
Setting Port Priority Level
MA5300(config-if-Adsl11/0/0)#priority 0
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
Setting Maximum Multicast Group Counts of a Port
MA5300(config-if-Adsl11/0/0)#multicast max-group-count 2
Setting VPI and VCI
MA5300(config-if-Adsl11/0/0)#adsl pvc vpi 0 vci 35
or MA5300(config)#adsl pvc vpi 0 vci 35
Unblocking an ADSL Port
MA5300(config-board-adsl11)#no block all
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
Adding an ADSL Line Alarm Profile
MA5300(config)#adsl line-profile add 3
(Refer to operation manual to see more detail)
Deleting an ADSL Line Alarm Profile
MA5300(config)#adsl line-profile delete 3
Modifying an ADSL Line Alarm Profile
MA5300(config)#adsl line-profile modify 3
Querying ADSL line alarm profile information
MA5300(config)#show adsl line-profile 1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
Activating an ADSL Port
MA5300(config-board-adsl11)#activate all 1
or MA5300(config)#adsl activate adsl11/0/0 to adsl11/0/23 1
Resetting ADSL Chipset
MA5300(config-board-adsl11)#chipset reset 1
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
ADSL Port Configuration
Querying ADSL Port Information
MA5300(config-board-adsl11)#show port state 23
MA5300(config)#show interface adsl11/0/23
Viewing line parameters of a port
MA5300(config-board-adsl11)#show line config 23
MA5300(config-board-adsl11)#show line state 23
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
5 Multicast Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
General VLAN Service Configuration
Networking requirements:
VLAN 2: user adsl 2/0/0, user adsl 2/0/1;
VLAN 3: user adsl 2/0/2 to user adsl 2/0/16
Uplink port: Ethernet 7/1/0,
Upper layer network equipment requires VLAN ID of the users.
Upper network
7/1/0
MA5300
2/0/0 2/0/1
User
User
vlan 2
Confidential Information of Huawei.
No Spreading without Permission.
2/0/2
2/0/16
User…………………User
vlan 3
Security Level: Internal
General VLAN Service Configuration
Configuration steps:
1.
ADSL link configuration
2.
Create a vlan domain according to the requirement, which should
include the corresponding client port (ADSL port)
3.
Add an upstream trunk port, and set vlans that are permitted to
pass
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
General VLAN Service Configuration
Create a new vlan 2
MA5300(config)#vlan 2
vlan2 contains adsl ports 2/0/0 and 2/0/1
MA5300(config-vlan2)#switchport adsl 2/0/0 to adsl 2/0/1
MA5300(config)#vlan 3
MA5300(config-vlan3)#switchport adsl 2/0/2 to adsl 2/0/16
MA5300(config-vlan3)# exit
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
General VLAN Service Configuration
MA5300(config)#interface Ethernet 7/1/0
Configure the upstream Ethernet port as a TRUNK port
MA5300(config-if-Ethernet7/1/0)#switchport mode trunk
Configure the port that it allows transparent transmission of
frames with VLAN ID 2 or 3
MA5300(config-if-Ethernet7/1/0)#switchport trunk allowed vlan
23
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SmartVLAN Service Configuration
Networking requirements:
All of users isolated with each other,
Uplink port: Ethernet 7/1/0,
Upper layer network equipment requires no VLAN ID of the users.
Upper network
7/1/0
MA5300
User
User
User…………………...User
vlan 2
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SmartVLAN Service Configuration
Configuration steps:
1.
ADSL link configuration
2.
Create a VLAN, and define it as SmartVLAN
3.
Set upstream Ethernet interfaces and downstream VDSL ports that
SmartVLAN includes.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
SmartVLAN Service Configuration
Create VLAN 2
MA5300(config)#vlan 2
Define the VLAN as SmartVLAN
MA5300(config-vlan2)#svlan-type smart
smartvlan includes upstream port ethernet 7/1/0,and adsl 2/0/0 and
2/0/23
MA5300(config-vlan2)#svlan-upport Ethernet 7/1/0
MA5300(config-vlan2)#switchport adsl 2/0/0 to adsl 2/0/23
MA5300(config)#exit
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration
Networking requirements:
The range of VLAN assigned to MA5300A is from 128 to 1023
The range of VLAN assigned to MA5300Bis from 1024 to 1919
Each adsl port is assigned a VLAN automatically
Upper network
VLAN:128~1023
MA5300A
VLAN:1024~1919
MA5300B
User
Confidential Information of Huawei.
No Spreading without Permission.
User………Use
User ……..User
Security Level: Internal
MUX VLAN Configuration
Enabling MUX VLAN
MA5300(config)# mux-vlan
MUX VLAN cannot coexist with a general VLAN or a Smart
VLAN.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration
Specifying upstream port of MA5300 A and range of local MUX
VLAN
MA5300(config)#mux-vlan uplink-port interface 7/1/0 localvlan 128 14
The upstream port must be a port on the ESM board, namely, an
FE port or a GE port.
The start VLAN ID is a multiple of 128 ranging 128~3072.The
number of VLAN groups ranges 0~60.
One board indicates a VLAN group
Usually one MA5300 can have up to 14 interface boards.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
MUX VLAN Configuration
Specifying cascading port of MA5300 A and range of cascading
MUX VLANs
MA5300(config)# mux-vlan cascading-port interface 7/1/1
cascading-vlan 1024 14
Specifying upstream port of MA5300 B and range of cascading
MUX VLANs
MA5300(config)#mux-vlan uplink-port interface 7/2/1
vlan 1024 14
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
local-
MUX VLAN Configuration
Setting the MUX VLAN for a specified interface board
MA5300(config)#mux-vlan slot 1 start-vlanid 128
Cancel the MUX VLAN setting of a specified interface board
MA5300(config)#mux-vlan slot 6 idle
Setting the MUX VLAN for a specified port
MA5300(config)#mux-vlan interface vdsl 5/0/0 vlan-id 129
Deleting the MUX VLAN of a specified port
MA5300(config)#mux-vlan interface vdsl 5/0/0 idle
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei.
No Spreading without Permission.
5 Multicast Service Configuration
Security Level: Internal
Multicast Service Configuration
Video stream
Multicast router
Internet
Video stream
VOD Server
MA5300
Video stream
Multicast
group member
Confidential Information of Huawei.
No Spreading without Permission.
Video stream
Non-multicast
group member
Video stream
Non-multicast
group member
Security Level: Internal
IGMP Snooping Configuration
Enable IGMP Snooping
MA5300(config)# igmp-snooping enable
IGMP Snooping is disabled by default.
Configuring Aging Time of Multicast Group Member Port
MA5300(config)# igmp-snooping host-aging-time 70
By default, the aging time is 260 seconds.
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
IGMP Snooping Configuration
Enabling a User under a Port to Leave an Multicast Quickly
MA5300 (config)# igmp-snooping quick-leave adsl2/0/1
Display the current state of igmp-snooping configuration
MA5300# show igmp-snooping configuration
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Multicast VLAN Configuration
Configure ADSL ports: Bind the template and activate it
Adding the gigabit Ethernet port 7/1/0 of MA5300 into the
upstream port of multicast VLAN.
MA5300(config)#mvlan-upport interface Ethernet 7/1/0
Adding the ADSL ports of MA5300 into the multicast VLAN.
MA5300(config)#mvlan-downport interface adsl 6/1/1 to adsl
6/1/3
Display the port information of multicast VLAN.
MA5300# show multivlan
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal
Confidential Information of Huawei.
No Spreading without Permission.
Security Level: Internal