Digital Stepper Drive with Analog Input DM805-AI

Download Report

Transcript Digital Stepper Drive with Analog Input DM805-AI

DM805-AI
Digital Stepper Drive with Analog Input
System Configuration
Indicators
Potentiometers
Digital I/O Signals Connectors
Analog Signals Connectors
Power Connectors
DIP Switch 8Bits
Mode/Current/Microstep Setting
Auto Configuration
RS232 Communication Port RJ11
Analog Input
Controller
Output
DM805-AI
Analog Input
+5V
+Ref
-Ref
Input
GND
0V
0-5V Analog Input Signal
Built-in +5V Output for a Analog Control and Testing
Built-in Potentiometers for Accel, Decel and Speed Adjusting
Limit Signals Input for Safe Operation
Internal Oscillator
NO Motion Controller
NO PLC
Built-in Pulse Generator for a No-Controller System
Built-in Potentiometers for Accel, Decel and Speed Adjusting
Input Signals for Start/Stop, CCW/CW and High/Low Speed Control
Pulse & Dir Input
Controller
Output
DM805-AI
PWM Input
Pulse
Dir
Pulse
Dir
Fully Digital Stepper Drive
DIP Switch for Micro Step/Operation Current Setting
Multi-Stepping Function
PC-Based Software Adjusting
Application
Velocity Adjusting
This drive is suitable for the application which needs to adjust the velocity via the potentiometer or
analog 0-5V command.
High Torque and Less Noise at Low Speed
It can work with the NEMA17/23/34 stepper motor to replace the brushless motor with gearbox due
to its high torque and less motor noise at low speed.
If necessary, it can be used in various kinds of machines, such as rotary heat exchange, conveyor
belts, transport vehicle, laser cutters, laser markers, high precision X-Y tables, labeling machines, and
so on.
Competitive In The Market
JVL
PA0067
Performance
Maxon
DEC
AMP
3520MO
30
%
Cost
Thank You!