Calypso Program Overview

Calypso Program Overview 2

If you have a CAD model, simply load it into Calypso. No model? Just start taking points.

Calypso Program Overview 3

A new Calypso program with the model loaded.

Calypso Program Overview 4

Ask the question. What are you interested in measuring?

Calypso Program Overview 5

Loading more Characteristics.

Calypso Program Overview 6

We have asked for Flatness, Roundness, Parallelism, and True Position.

Calypso Program Overview 7

Click the feature being measured for the characteristic.

Calypso Program Overview 8

Modify the measurement strategy for the measured feature.

Calypso Program Overview 9

Define the features between which parallelism is being measured.

Calypso Program Overview 10

The measurement strategy for the measured plane.

Calypso Program Overview 11

Define your considered feature and its Datum structure from the model.

Calypso Program Overview 12

The nominal position and orientation is taken from the model. No further modifications are needed.

Calypso Program Overview 13

Define the Base Alignment using elements from the CAD model.

Calypso Program Overview 14

Base Alignment is created. The origin is created on the model.

Calypso Program Overview 15

Create Clearance Planes around the part. This defines the area around which your CMM will travel during inspection.

Calypso Program Overview 16

Clearance Planes defined around the part.

Calypso Program Overview 17

Ready to run the inspection.

Calypso Program Overview 18

Graphical output for Roundness of the cylinder.

Calypso Program Overview 19

Graphical output of Flatness of the plane surface.

Calypso Program Overview 20

Typical Calypso inspection report. Deviations are reported on far right of report. This information is used to better the process.

Calypso Program Overview 21