Transcript Tractel® UVM 10 Suspended Rotorblade platform

Suspended Rotorblade platform
Tractel® UVM 10
Inspection – Service - maintenance
www.tractel.com
© Copyright 2010
Tractel® UVM 10 Suspended Rotorblade platform
Inspection, service & maintenance
Damages that can be identified and resolved using an UVM-10 platform.
Lightning strike
Delamination
Surface cracks
1
Tractel® UVM 10 Suspended Rotorblade platform
Suitable for blades in "pitch“ position
2
Tractel® UVM 10 Suspended Rotorblade platform
To the top, in 4 simple steps
1. Arrival
2. Launch
4. Catch the blade
4. Reach the Top
3
Tractel® UVM 10 Suspended Rotorblade platform
Rigging
Slings around rotorblade
Inside the nacelle, attached to the frame
From the spinner, main shaft
4
Tractel® UVM 10 Suspended Rotorblade platform
Hoisting parallellogram
Advantages:
1.
2.
3.
4.
High hoist position.
Low centre of gravity.
High stability thanks to a patented
parallellogram design which enables
adjustment of the center of gravity.
Typical position pushes the platform against
the tower for higher stability.
5
Tractel® UVM 10 Suspended Rotorblade platform
Advantages:
• Economical solution:
• Reduced the turbine down time.
• No external crane needed.
• Time to install platform less than 2
hours!
• Increased free load thanks to absence
of counterweights (400 kg total).
• Easy to manoeuvre
• No counter weights)
• full electrical manipulation of the
platform.
• Safer to work on thanks to platform
excellent stability.
6
Tractel® UVM 10 Suspended Rotorblade platform
Characteristics:
• Fast rigging and de-rigging
• Electric adjustment to variance of blade cross
section in mid air
• Electric adjustable spacer frame
• Remote control for single functions or complete
functionality
• Emergency power supply to open the brakes and
movement of the spacer frame
• Suitable for wide range of windturbines and blade
types
7
Tractel® UVM 10 Suspended Rotorblade platform
Special feature:
The UVM 10 platform has 2 positions to mount the hoist parallellograms.
In normal configuration, the platform travels straight against the tower.
In the angled configuration, you can also reach the top of highly concave blades.
8
Tractel® UVM 10 Suspended Rotorblade platform
Specifications:
CE Compliant
North America
Power Supply
400V 50Hz 3~
400V 60Hz 3~
220V 60Hz 3~
Hoist type – TirakTM
X1030P
9m/min
XE1030P
35 ft/min
Safety device - BlocstopTM BSO 1030EFA
BSO 1030EFA
Wireropes - diameter
10mm
10mm
Rated load
2 x 225kg
2 x 330 Lbs
Max wind speed
12.5 m/s
33 ft/sec
9
Tractel® UVM 10 Suspended Rotorblade platform
Dimensions – Side:
4m
Min. 4.6m – Max. 10.9m
10
Tractel® UVM 10 Suspended Rotorblade platform
Dimensions – Top:
Min. 1m
Max. 2.1m
4.2m
11
Tractel® UVM 10 Plateform: Customer References
www.tractel.com
© Copyright 2010