Transcript ASHLOK SAFE EARTHING ELECTRODE LIMITED ---

ASHLOK
Presents
Safe Earthing Electrode (ASEEL)
“ YOUR SAFETY IS OUR RESPONSIBIlITY”
Need For Superior Earthing
 Industrial Revolution and Infrastructure Development
 Electronic Boom in the 1980’s
 Requirement of Precise Ohmic Values for various applications
 Protection from chaotic electrical Hazards
 NOT TO BE FORGOTTEN:
 Human Safety
 Infrastructure Safety
EARTHING SYSTEM
Earth Pit
Conductive Electrodes
Soil Enhancing Compound
Significance of Good Earthing
Low impedance
Resist Corrosion
Sufficient Mechanical strength to hold fault current
Earth Resistance
Varies with different soils
To be Checked before earthing the site
Decide the earthing system for the requirement
TECHNOLOGY & STRUCTURE
Pipe In Pipe Technology
Coaxial Pipes ( One inside the other)
Adequate Mechanical strength
Galvanized or
Coated for effective corrosive resistance
Ashlok Earthing – Features
Crystalline Conductive Mixture (CCM):
 Contains metal alloys and natural compounds
 CCM is an unique mixture having.




Excellent conductivity.
High specific gravity.
Anti-corrosive Properties.
Excellent bonding properties.
Ashlok Earthing – Features
Back Fill Compound (BFC) : After erecting the pipe in the earth pit the
BFC is mixed with water and filled around the pipe.
 Not soluble & part of the earth pit.
 Hydroscopic in nature.
 Enhances performance of electrode – Electrolytic Gel solution.
 Maintains moisture and enhances conductivity around the
electrode.
 Does not leach in to the normal soil.
 Reduces soil resistivity around the electrode.
Ashlok Earthing - Benefits
Scientifically developed, Readymade and Standardized
 Maintenance Free
 Consistency
 Larger surface area
 Low earth resistance
 Corrosion resistant & Eco friendly
 Long life – 15 -20 yrs
As per IS 3043:1987 standards
TECHNICALITIES
ASEEL 19 ( 3 Mtrs ) Dia 50mm
20 KA /sec of rms
51 KA peak value
ASEEL 39 ( 3 Mtrs ) Dia 80mm
40 KA /sec of rms
100 KA peak value
Ashlok Earthing – Specially Coated Electrodes
Advanced SPM ( Special Purpose Machine ) technology
80 – 100 microns of coating on the outer pipe.
Customized as per application & requirement
SPM Benefits
Thick Coating
Uniformity
Mat Finish
Products in 2009
Zinc coated
Copper coated
Alloy coated
Installation – Normal Soil
3 M Electrode – Normal Soil
Augur a hole of 10” Diameter and 10’ in depth.
Put BFC at the bottom of the pit (App 5 Kgs)
Place the electrode in the middle of the pit.
Filter the mother soil (taken out during
auguring) - mix the BFC with the soil.
Start putting the mixture around the electrode
with adequate supply of water in the pit.
Installation – Normal Soil
•With a long stick, start poking the sides of the pits to
help in mixing the compound well and to remove the air
bubbles.
•Fill the pit completely with the compound mixture and
pour abundant water in and around the pit.
•Leave the pit to rest for a day.
•Construct a chamber and provide connection to the
equipment.
Achievements & Credentials
Best product award – Elecrama 2008
Accomplished the toughest installation in remote regions of India,
under the harshest conditions
Our electrode has the distinction of being the only Earthing product
to withstand the highest short circuit current tested by CPRI
Successfully converted our 1st Annual turnover into daily turnover
Some Prominent Customers
Some Prominent Customers
Some Prominent Customers
Some Prominent Customers
Some Prominent Customers
Some Prominent Customers
Some Prominent Customers
Railways and Aviation
• CONVENTIONAL
• ASHLOK SEE
•
•
•
•
Long term – (15 – 20 yrs)
One Time investment
Maintenance Free
Better Ohmic Value
•
•
•
•
Short Term ( 1 – 2 yrs )
Repetitive Investment
Continuous maintenance
Unpredicted Ohmic Value
Performance, Value, Safety & Good price (Vs) Only less COST
Please Act Smart & Fast - Be Safe
“”
THANK YOU