Transcript File

INTEGRATED DESIGN PROJECT
BFC 43303
IDP NEEDS…..
1. Architectural Drawing
 Site Key Plan (Infrastructure) –make sure layout plan
consists of site spot level (contour line), exist. utilities,
exist. facilities, existing data extent beyond site
boundary)
 Building Key Plan (Structure)- Floor key plan, side-frontback elevation, building cross section
2. SI Report
 Bore Log, SPT value..etc
3. MSMA (Manual Saliran Mesra Alam)- Design for surface
runoff.
4. Arahan Teknik Jalan JKR – Road design
5. Building Work Specification – JKR
6. Euro Code – Structure design
Documents to be submitted….
1. Infrastructure
–
–
–
–
Earthwork
Road and Drainage
Sewerage
Water reticulation
Compulsory
Preliminary
Report & Final
Report
2. Structure
Choose one
Drawing to be prepared…
1.
Infrastructure

Earthwork

Key Plan Dwg- Slope, Retaining wall, DP or OSD, PL…

Cut and fill Dwg- differentiate with colour

Typical drawing detail Dwg- cross section for ; slope, retaining wall, earthwork.

ESCP (Erosion Sediment Control Plan)

Key plan Dwg. – propose temporary earth drain, silt trap, wash through,
temporary crossing (drainage-culvert), site office location, hoarding,
material storage, temporary excess.

Typical detail Dwg- Silt trap, wash through, hoarding, temporary drain, slope
protection

Road and drainage (R&D)

Key Plan Dwg.- combine for both road and drainage (include road alignment,
location road signage, drain network, drain invert level (IL), shoulder, parking
area, road furniture..

Typical Detail Dwg.-Pavement /Road thickness cross section, road signage, road
furniture, side drain, drainage, sump, culvert and etc..

Sewerage

Key Plan/Layout Plan – sewerage network, mainhole location, invert level,

Detail Dwg.- mainhole, longitudinal cross section for pipe network include invert
level, septic tank detail or STP.

Water reticulation


Key Plan Dwg- consist of pipe network from tapping point to water
tank, location of sluice valve, air valve, meter, hydrant (90m interval)
Detail Dwg- sluice valve, air valve, meter, hydrant,
1. Structure

Foundation lay out Dwg- pilecap/pad footing/raft-include
column loading








Detail Dwg-reinforcement distribution for foundation
Each floor layout Dwg- Include beam/column/slab label.
Beam detail Dwg for each floor
Column detail for the whole storey of building
Slab detail layout Dwg for each floor
Slab cross sectional for each floor
Stair case detail
Shear wall/Lift core detail if any
1. Preliminary report consists of:




Brief description of project-nos of storey, project total cost,
project location, space usage….
Conceptual planning (sketch)-location of RC wall, silt trap
location, beam/column/slab location, R&D location and etc…
Standard and guideline to be used; MSMA, Arahan Teknik
Jalan, Eurocode and etc…
Parameters and data to be used; building loading case, soil
bearing capacity, slope gradient, and etc
2. Final report consists of:






Detail description of project and team working
Analysis and design
Calculation – for structure manual calculation and software
Drawig-key plan and detail
Cost estimation-Bill of Quantities (BQ)-taking off…
Appendices