Transcript here - PJ2T

D2831-S / D2836-S
TechNotes V1.2
Major changes vs. V1.0:
-Layout updated; FTP links updated
- Frontpanel Connector details added (page 9)
- S/PDIF Connector added (page 12)
- Chassis Intrusion details added (page 16)
- System Monitoring API details added (page 28)
- Link to „Climatic Testreport“ added (page 33)
- Overview „typical Power Consumption“ added (page 38)
- „Additional Notes“ updated (page 50/51)
- Details „System Watchdog“ added (page 52)
Mainboard OEM Sales - 05/2009
Content
• Overview and Features
 Page 2
• SystemMonitoring
 Page 19
• Thermography / Temperature Reference Points
 Page 31
• Power Supply Requirements; Typical Power Consumption  Page 36
• Display Options (VGA, DVI, HDMI)
 Page 39
• Operating System Support
 Page 45
• Miscellaneous (
 Page 49
• New FTP download link for D2831-S / D2836-S
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/
(provides BIOS; Drivers; Documents & Approvals; Specifications; Tools etc.)
Note: Further details are available in the D283x-S Mainboard Specification!
1
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Overview
• Basic Features
• Special Features
• Onboard Connectors & Connector Specs
2
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Basic Features D2831-S / D2836-S
•
Based on latest Intel Eaglelake technology (iQ45 + ICH10DO)
•
Support for full range of latest Single-/Dual-/Quad-Core processors (up to 95W)
•
Intel® CoreTM 2 Quad Q9000 / Q8000 series
•
Intel® CoreTM 2 Duo E8000 / E6000 series
•
Intel® CoreTM 2 Duo E7000 / E4000 series
•
Intel® Pentium® dual-core E2000 / E5000 series
•
Intel® Celeron® dual-core E1000 series
•
Intel® Celeron® 400 series
•
Four memory sockets DDR2/800 supporting up to 16GB
•
Dual Gbit LAN onboard supporting ASF 2.0 and Teaming
•
Trusted Platform Module TPM V1.2 onboard
•
PCI Express Gen2
•
State-of-the-art integrated graphics onboard
•
5.1 multichannel audio onboard
3
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Basic Features D2831-S / D2836-S
4
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Special Features D2831-S / D2836-S
Designed & approved for enhanced operating temperature
range from 0°C to 60°C
Designed & approved for 24/7 continuous operation
High Efficient core voltage regulator design (85% @ 65W)
Enhanced lifecycle up to 5 years
5
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Special Features D2831-S / D2836-S
Realtime Voltage Guard for secure system operation
 Monitoring of all relevant onboard voltages and
system shutdown in case of failure
Internal socket for USB stick
 Install your USB dongle inside
the chassis w/o danger of theft
Internal socket for USB flashdrive
 Easy integration of flashdrives for Embedded OS or memory extension.
Mainboard prepared for mechanical fastener
6
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
D2831-S: Onboard Interface Connectors
Power Supply 24pin
Parallel Port Connector
Power Supply Monitoring
Floppy Connector
Frontpanel
Socket for USB Flash Drive
(one USB channel)
6 x SATA2
4 x SDRAM DDR2
ICH10-DO
4 x USB 2.0
Internal COM2
Buzzer
CPU Fan
iQ45
CMOS Battery
LCD Status Display
Socket LGA775
Chassis Intrusion
Chassis Fan
Chassis Fan
Chassis Fan
Internal S/P-DIF
Audio Frontpanel
12V Supply for Processor
2 x PCI
internal Socket for USB Stick
Audio Input (CD type connector)
PCIe x8 (4 lanes)
USB
PS/2
VGA, COM
USB, LAN
USB, LAN
PCIe x16
Audio
7
7
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
D2836-S : Onboard Interface connectors
Power Supply 24pin
Parallel Port Connector
Power Supply Monitoring
Floppy Connector
Frontpanel
Socket for USB Flash Drive
(one USB channel)
6 x SATA2
4 x SDRAM DDR2
ICH10-DO
4 x USB 2.0
Internal COM2
Buzzer
CPU Fan
iQ45
CMOS Battery
LCD Status Display
Socket LGA775
Chassis Intrusion
Chassis Fan
Chassis Fan
Chassis Fan
Internal S/P-DIF
4 x PCI
12V Supply for Processor
Audio Input (CD type connector)
internal Socket for USB Stick
Audio Frontpanel
PCIe x8 (1 lane)
USB
PS/2
VGA, COM
PCIe x1 (1 lane)
USB, LAN
USB, LAN
PCIe x16
Audio
8
TechNotes D283x-S V1.2
Copyright 2009
2007 FUJITSU LIMITED
Connector Specifications
Power LED:
Anode: Pin 7/9 - 80R Pullup to 5V_Aux
Cathode: Pin 11 OD output (12mA)
Alert LED:
Anode: Pin 13 - 100R Pullup to 3.3V
Cathode: Pin 15 OD output (13mA)
HDD LED:
Anode: Pin 19 - 360R Pullup to 5V
Cathode: Pin 21 output (6mA)
Speaker Output:
Differential audio signal (max. 1W / 8Ohm)
9
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Internal Parallel Port Connector
Internal COM2 Connector
10
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Internal USB Connector (2 x 2 ports)
Internal USB Flash Drive Connector (1 port)
Internal USB Stick Connector (1 port)
11
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Note:
Standard connector bracket should
directly connect to SPDIFout and GND
pins (no signal converter required)
Sample S/PDIF Connector Bracket
12
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Note:
If a 3-wire fan is connected, but BIOS Setup is set to “4-Wire” (= Default) the fan will
operate at full speed (=12V).
In 3-wire mode, the default minimum operating voltage is set to ~ 6V.
Fan3 Mode Configuration in BIOS Setup
 Minimum fan speed can be customized via SilentFanConfig-Manager tool!
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/
13
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Notes:
Pin 1, 3:
Pin 7, 8:
Pin 9:
Pin 12, 13:
Pin 10:
Pin 11:
Pin 14:
SM-Bus; 3,3V; only to be used for devices powered by 3.3V Aux.
“Low Active”, max. 12mA
“Low Active”, max. 6mA
“Low Active”, max. 10mA
“Low Active”, max. 10mA
reserved, not used!
3,3V Auxiliary Voltage; specified for 100mA (protected by 750mA fuse)
LCD Configuration in BIOS Setup
14
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
15
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Connector Specifications
Chassis Intrusion
Note: The intrusion supervision feature needs to be enabled in BIOS Setup first (Menu „Security“  „Cabinet Monitoring“).
This BIOS option is only available if pin 3 („Intrusion Switch Present“) is connected to GND!
1
Intrusion Connector
Break Contact
Contact closed  Chassis is open
Contact open  Chassis is closed
Chassis intrusion is active even if the system is switched off (S5
state) or disconnected from mains power.
The intrusion event is monitored by the Southbridge (ICH) and
stored in the BIOS Eventlog during the next Boot.
A timestamp (Boot date/time) will be added then.
Note: This timestamp does not represent date/time of the intrusion
event!
If a Supervisor Password is enabled in BIOS Setup, the system will
stop during BIOS POST if an intrusion event has been detected. In
order to continue, the Supervisor Password must be entered to
confirm the intrusion event.
Note:
- A Windows API to monitor the intrusion event is available
- The intrusion event is transmitted via LAN ASF and can be
monitored remotely by an appropriate ASF application
16
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Voltage Guard
Onboard Voltage Supervision (Voltage Guard)
Jumper removed = Supervision Enabled
In this case, all major onboard voltages are monitored by hardware comparators.
If any voltage is out of range a system reset will be generated and the power supply (PSON) will be switched
off.
The system can be switched on again after AC power has been removed for several seconds.
(D2831-S)
(D2836-S)
17
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
• Temperature Sensors and Fans
•
•
•
•
SystemGuard: Fan/Temperature Monitor
SilentFanConfig: Customize System Monitoring
Thermography D283x-S
Temperature Reference Points
18
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
D2831-S: Temperature Sensors and Fans
Sensor 1
(inside Super I/O)
FAN 1
(CPU Fan, PWM)
Sensor 2
(PCB rear side,
below Northbridge)
CPU Sensor
(inside Processor)
FAN 3 ***
FAN 4 (PWM)
FAN 2
(PWM)
*** FAN 3


Note: Do not attach more than one fan per connector!
TechNotes D283x-S V1.2
19

PWM or 3-Wire
selectable via BIOS
Setup (Default = PWM)
Fan current max. 1A
Copyright 2009 FUJITSU LIMITED
System Monitoring
D2836-S: Temperature Sensors and Fans
Sensor 1
(inside Super I/O)
FAN 1
(CPU Fan,
PWM)
Sensor 2
(PCB rear side,
below Northbridge)
CPU Sensor
(inside Processor)
FAN 3 ***
FAN 4 (PWM)
FAN 2
(PWM)
*** FAN 3


Note: Do not attach more than one fan per connector!
TechNotes D283x-S V1.2
20

PWM or 3-Wire
selectable via BIOS
Setup (Default = PWM)
Fan current max. 1A
Copyright 2009 FUJITSU LIMITED
System Monitoring
D283x-S: SystemGuard
System Monitoring Tool:
• Visualize processor and sensor temperature data
• Display current speed for all attached fans
• User can configure fan aging control (menu “Special”)
• User can configure system watchdog (menu “Special”)
• User can adjust system behaviour via “Silent PC” /
“Performance PC” slider by forced processor throttling
21
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
D283x-S: SystemGuard - Details
Temperature Sensors
Processor Sensor 1)
Super I/O Sensor
Northbridge Sensor
Sensor / Fan Matrix
• Indicates which sensor
influences the specific fan speed
• Note: Characteristics for FAN1
is always dependent on the CPU
temperature – fully controlled by
the system BIOS.
Due to safety reasons the influence
of the CPU sensor for FAN1 cannot
be disabled, but Sensor1 and / or
Sensor2 can be activated in addition!
1) Note: As Intel has replaced the analogue
processor „diode“ temperature measurement
by the digital „PECI“ measurement (Platform
Environment Control Interface) which does
no longer provide the absolute processor
temperature, SystemGuard can only display
the processor´s temperature range.
All relevant System Monitoring parameters can be
customized via SilentFanConfig-Tool!
22
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
SilentFanConfig: Customize System Monitoring
• Windows-based System Management Configuration Tool
• Available for download:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836S/IndustrialTools_D283x-S/
• Use SilentFanConfig to adjust the required settings.
• As result, SilentFanConfig creates a BIOS configuration file.
Save file as "smco.in“
• Afterwards the “smco.in”-file needs to be flashed into the system
BIOS by the DOS-tool "SMCO“:
Copy smco.exe and smco.in to a DOS boot medium (USB-stick
or USB- floppy or harddisk with DOS), boot on target platform and
run following operation: smco smco.in
• New settings are written permanently to system BIOS
• Any BIOS update or BIOS Recovery will not reset the new settings
Note: SilentFanConfig V1.5 or higher required for D283x-S
23
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
SilentFanConfig: Fan Settings
Basic Fan Settings
Adjust minimum fan startup speed
BIOS default settings D283x-S:
• 30% for all fans
Fan Ripple Count
BIOS default settings D283x-S:
• 2 ripples per rotation
Enable/disable mainboard fan
speed control
BIOS default setting D283x-S:
• Yes. Regulate fan speed…
24
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
SilentFanConfig: Basic Sensor Settings
Basic Sensor Settings
Adjust related temperature settings
BIOS default settings D283x-S:
Sensor1 (Super I/O)
Fan Start-Up: 40°C
• Fan Full-Speed: 60°C
• Temperature Alert: 68°C
•
Sensor2 (Northbridge)
• Fan Start-Up: 50°C
• Fan Full-Speed: 70°C
• Temperature Alert: 72°C
25
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
SilentFanConfig: Global Settings
Global Settings
Adjust condition for “fan disconnected”
BIOS default settings D283x-S:
• 300 rpm
Assign sensor influence
BIOS default settings D283x-S:
• Fan1 controlled by CPU Sensor
• Fan2, Fan2, Fan3 and Power Supply
Fan controlled by CPU Sensor and
Sensor1 (Super I/O) and Sensor2
(Northbridge)
Note: Due to safety reasons the
CPU sensor always influences
Fan 1 (CPU), this cannot be
changed by SilentFanConfig!
26
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
SilentFanConfig: Import / Export Settings
Import / Export Settings
Create configuration file “smco.in”
for additional SMCO flash tool (DOS-based).
Customized System Management settings
can be flashed permanently into system BIOS.
27
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
System Monitoring Driver / API
- The related APIs provide access to the various System Management / System Monitoring features like
-
Fan speed control
Adjust minimum fan speed
Onboard sensor temperatures
Temperature ALERT
System/Hardware Watchdog
- Windows-based API:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/BMC_Management-Controller-API/
- Linux-based Driver / API
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/Linux/
Note: This driver currently supports Kernel 2.6.29 and 2.6.30
28
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Components for continous operation @ 60°C
Operating Conditions:
COM Driver with enhanced
operating temperature range
Circulating air max. 60°C
Usage 24h / 7 days
High Efficiency Processor
Core Voltage Regulator
(> 85% @ 65W)
for reduced thermal
dissipation loss
COM Driver with enhanced
operating temperature range
Efficient Heatsink
on Northbridge
Switched Voltage Regulator
instead of Linear Regulator
supporting 3-Wire FAN
(stable operation within full
temperature range)
.
Note: Power Consumption
Q45  P max = 17W
 P idle = 6W
Extra Heatsink
on Southbridge
Quartz with enhanced
operating temperature range
.
Note: Power Consumption
ICH10DO  P max = 4.9W
 P idle = 1W
All mainboard electrolyte
capacitors: Polymer type only
(= solid electrolyte)
Capacitor Endurance Time
Lx = effective endurance time
Lo = endurance time @ 105°C (e.g. 2.000hrs)
to = 105°C
tx = capacitor surface temperature (e.g. 75°C)
Solid Electrolyte:
Fluid Electrolyte:
(Sample picture: Processor Core Voltage Regulator)
29
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Capacitor Endurance Time Comparison
30
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Thermography D283x-S
Processor fan/heat sink: EKL- 21510021064
31
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Thermography D2831-S
32
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Thermography D2836-S
FTP-Link to Climatic Test Report:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Approvals&Testreports/Thermal-Testreport/
33
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Temperature Reference Points D2831-S
Operating Conditions:
Super I/O max. 70°C
Circulating air max. 60°C
Usage 24h / 7 days
Inductors max. 90°C
All Capacitors: max. 75°C
Voltage Regulators max.
90°C
All Capacitors: max. 75°C
Northbridge Heatsink
(chip surface) max. 75°C
Inductors max. 90°C
LAN Controller max. 85°C
Voltage Regulators
max. 90°C
LAN Quartz max. 70°C
LAN Controller max. 85°C
Inductor max. 90°C
Synthesizer Quartz max. 70°C
Southbridge Heatsink
(chip surface) max. 75°C
Clock Synthesizer max. 85°C
Battery max. 60/70°C 1)
Audio Codec max. 75°C
1) Note: Battery operation is
specified in temperature range up
to 60°C. Operation between
60°C and 70°C may result in:
- Higher self discharge rate
- Decline of specified characteristics
- Danger of leakage increases
Reference Point Limit Temperatures (Component Surface) must not be exceeded!
34
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
System Monitoring
Temperature Reference Points D2836-S
Operating Conditions:
Super I/O max. 70°C
Circulating air max. 60°C
Usage 24h / 7 days
Inductors max. 90°C
All Capacitors: max. 75°C
Voltage Regulators max.
90°C
All Capacitors: max. 75°C
Northbridge Heatsink
(chip surface) max. 75°C
Inductors max. 90°C
LAN Controller max. 85°C
Voltage Regulators
max. 90°C
LAN Quartz max. 70°C
LAN Controller max. 85°C
Inductor max. 90°C
Synthesizer Quartz max. 70°C
Southbridge Heatsink
(chip surface) max. 75°C
Clock Synthesizer max. 85°C
Battery max. 60/70°C 1)
1) Note: Battery operation is
specified in temperature range up
to 60°C. Operation between
60°C and 70°C may result in:
- Higher self discharge rate
- Decline of specified characteristics
- Danger of leakage increases
Audio Codec max. 75°C
Reference Point Limit Temperatures (Component Surface) must not be exceeded!
35
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Power Supply Requirements
• ATX Power Supply
• Typical Power Consumption
36
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Power Supply Requirements
ATX Power Supply
Connectors for ATX Power Supply
(3)
(2)
(1) 24 pin connector (ATX layout)
(2) 4 pin connector (+12V, GND)
(1)
Note: The +12V supply (up to 12A) for processor and chipset is provided via the
4 pin connector! Onboard voltage regulators convert the +12V input power
to the appropriate processor / chipset supply voltages.
(3) Processor Core Voltage Regulator: High Effciency Design (= 85% @ 65W)
for enhanced power saving and less thermal dissipation loss.
Requirements for ATX Power Supply
1) The ATX power supply should support the minimum
load conditions as mentioned in the chart.
If the new C3/C4 processor power states are used, the
minimum load for +12V will be reduced to 0.1A!
The max. mainboard current in the chart doesn´t
include the power for optional adapters and drives!
37
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Power Supply Requirements
Typical Power Consumption (AC mains power)
• Configuration: D2836-S
2 x 1GB DDR2-800
1 x HDD 160GB SATA
ATX Power Supply “EPA 4.0-compliant / 80+”
Windows XP
XP „Idle“
XP „Idle“
C3/C4
disabled 1)
C3/C4
enabled 1)
XP, Processor
Load 50%
XP,
Processor
Load 75%
XP, Processor
Load 100%
Celeron® 450
2.2GHz , 35W
35W
not supported
50W
53W
56W
Pentium® dual-core
E2160, 1.8GHz, 65W
35W
not supported
50W
57W
62W
Core TM 2 Duo
E8600, 3.33GHz, 65W
37W
28W
58W
71W
82W
Core TM 2 Quad
Q9400, 2.66GHz, 95W
38W
28W
66W
83W
115W
Core TM 2 Quad
Q9400S, 2.66GHz, 65W
36W
28W
58W
73W
98W
Processor
1) C3/C4 Processor Power States are disabled by default in BIOS Setup due to possible side-effects like reduced PCI performance.
These Power States are only supported by the latest Core TM 2 Duo / Core TM 2 Quad processor series.
In BIOS Setup, the appropriate setting is available in menu „Advanced“  „Enhanced Idle Power State”
38
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options
• DVI, VGA, HDMI
39
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options
VGA Output
VGA
optional: Audio
Analog (VGA) Monitor
max. VGA screen resolution:
2048x1536 / 32bit @ 75Hz
40
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options
DVI Output
DVI-D via DVI-Adapter
optional: Audio
Digital (DVI) Monitor
max. DVI screen resolution:
1920x1200 @ 60Hz
Note: DVI Adapter supports Single Link only!
41
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options
HDMI Output
HDMI
via DVI-Adapter & HDMI Connector
Digital (HDMI) Monitor
max. HDMI screen resolution:
1920 x 1200 @ 60Hz
HDMI transfers Video & Audio
HDMI Audio Device
needs to be enabled
via Control Panel!
42
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options
Dual Display Output
VGA
DVI-D or HDMI
Analog (VGA) Monitor and Digital (DVI or HDMI) Monitor
Dual Independent Display / Extended Desktop
43
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Display Options – DVI-D Adapter
 D2823-A (SFF slot bracket)
 D2823-B (ATX slot bracket
Specification
 Single DVI-D extension adapter
 Supports Single-Link DVI
 Onboard VGA connector still useable
 ATX / LowProfile I/O connector bracket
 Supported by mainboard D2811-A /
D2812-A / D2831-S / D2836-S /
D2841-A
 No drivers required
 Adapter requires BIOS support which
may not be a provided by non-FSC
mainboards
44
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Operating System Support
• Windows ® XP / VISTA
• Windows® XP Embedded
• Linux
45
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Operating System Support
Support for Windows® XP / VISTA
• Mainboard
D283x-S is designed according to the
Microsoft Guidelines for Windows XP and
Windows VISTA
• MS certified drivers are available via OEM DU-DVD
and OEM FTP Server
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/
46
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Operating System Support
Support for Windows® XP Embedded
Conditions
• Customer is familiar with XP Embedded & Target Designer / Component Designer
• Customer creates specific XP Embedded SW installation at his own responsibility & risk
FSC provides Board Support Package
(SLD files incl. drivers for D283x-S onboard components)
• Drivers contain english language version
• SLD files have no license restrictions
• Complete BSP is available via OEM FTP Server
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/
47
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Operating System Support
Support for Linux OS
openSUSE 10.3, 32 Bit
openSUSE 10.3, 64 Bit
openSUSE 11.0, 32 Bit
openSUSE 11.0, 64 Bit
SUSE Linux Enterprise 10 SP2, 32 Bit
SUSE Linux Enterprise 10 SP2, 64 Bit
Fedora 9, 32 Bit
Fedora 9, 64 Bit
Red Hat Enterprise Linux 5.2, 32 Bit
Red Hat Enterprise Linux 5.2, 64 Bit
Debian Etch, 32 Bit
Debian Etch, 64 Bit
Debian Lenny, 32 Bit
Debian Lenny, 64 Bit
Ubuntu 7.1, 32 Bit
Ubuntu 7.1, 64 Bit
Ubuntu 8.04, 32 Bit
Ubuntu 8.04, 64 Bit
Basic OS
Installation
HDD / DVD
Read/Write
Access
Graphics
LAN
2nd LAN
Sound
OK 1)
OK 1)
OK
OK
OK
OK
OK
OK
OK
OK
OK 1,5)
OK 1,5)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK 6)
OK 6)
OK
OK
OK
OK
OK
OK
OK
OK
fail 3)
OK
OK 4)
OK 4)
OK
OK
OK
OK
OK
OK
OK
OK
fail 3)
OK
OK
OK
fail 2)
fail 2)
fail 3)
OK
OK 4)
OK 4)
fail 2)
fail 2)
fail 2)
fail 2)
fail 2)
fail 2)
OK
OK
fail 3)
fail 2)
fail 2)
OK
fail 3)
fail 3)
OK
OK
OK
OK
OK
OK
OK
OK
fail 3)
fail 3)
OK
OK
fail 3)
fail 3)
OK
OK
1) Kernel parameter PCI=nommconf required
2) Only one LAN port supported, second LAN port requires driver from latest vanilla kernel
3) Feasible driver available in latest vanilla kernel
4) Feasible driver available here: http://forgeftp.novell.com/driver-process/staging/pub/update/realtek/sle10sp2/common/
5) AHCI disabled; SATA compatible mode only
6) VESA driver required
48
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Miscellaneous
• Additional Notes & Possible Restrictions
• System Watchdog
49
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Miscellaneous
Additional Notes & Possible Restrictions
• Harddisk Password
The current system BIOS doesn´t support the HDD password in AHCI- and RAID-mode
Full HDD password support will be offered by BIOS > R1.02
• BIOS Recovery
AC mains power needs to be unplugged before and after a BIOS Recovery
• Boot from USB Stick or USB HDD
If the BIOS Setup option “Force USB Stick Boot” is enabled, the system will only boot from (any)
USB Stick or USB HDD. All other devices will be excluded from the “Boot priority order”.
This feature can be used to enable automatic updates whenever an appropriate USB Stick
or USB HDD is attached before system boot.
The default setting is “disabled”
50
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Miscellaneous
Additional Notes & Possible Restrictions
• LAN LEDs
The rear LAN LED's are off in ACPI system states S3 - S5 (Limitation of Realtek LAN controller)
• BIONVD Tool (Change BIOS Setup Defaults)
Some BIOS Setup parameters can’t be fixed via BIONVD tool.
An updated toolset supporting all parameters is expected for BIOS > R1.02
• Enhanced Idle Power State
The system BIOS provides support for the latest C3/C4 processor power saving modes
(“Enhanced Idle Power State” = disabled in BIOS Setup by default!).
Usage of C3/C4 requires appropriate support of the power supply (e.g. min. load 0.1A@+12V)
Note: If C3/C4 support is enabled, the PCI performance may be reduced!
51
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
Miscellaneous
System Watchdog
D283x-S provides an independent HW Watchdog
(integrated in System Management Controller)
Watchdog Programming:
- Via watchdog option in SystemGuard software
Select Watchdog feature in folder “Special”!
SystemGuard provides the trigger for the Watchdog
within the specified schedule.
If Windows “hangs”, the Watchdog will force the system
to reboot.
- Via Windows-based API:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/BMC_Management-Controller-API/
- Via Linux-based Driver / API
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/Linux/
Note: This driver currently supports Kernel 2.6.29 and 2.6.30
52
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED
53
TechNotes D283x-S V1.2
Copyright 2009 FUJITSU LIMITED