Transcript What`s New in Fireware XTM v11.9
What’s New in Fireware v11.10
WatchGuard Training ©2015 WatchGuard Technologies, Inc.
What’s New in v11.10
New Feature • Bandwidth and time user quotas Monitoring Enhancements • Review and reset user quota data • • VPN diagnostic messages and report enhancements Gateway Wireless Controller shows and filters on rogue AP devices, and shows client signal strength • Full Screen mode in FireWatch in Fireware XTM Web UI Subscription Services Enhancement • Setup wizards for services now available in the Web UI VPN Enhancements • Mobile VPN with SSL v10.11 clients for Windows and Mac OS X Certificate Management Enhancements • Manage certificates from the Web UI • Automatic CA certificate updates
WatchGuard Training
2
What’s New in v11.10
Wireless Access Point Enhancements • Wireless traffic shaping • • • • Time-based SSID Activation Scheduled restarts of AP devices Multiple AP device selection for AP actions Enable rogue access point detection SSO Enhancements • Exchange Monitor (EM) Exchange Server 2013 support • • • Clientless SSO for RDP logins Traffic through BOVPN tunnels can use SSO Support for switching between multiple users of the SSO Client RapidDeploy Enhancements • Improvements for CSV files on a USB drive System Enhancements • NTP server
WatchGuard Training
3
What’s New in v11.10
Networking Enhancements • Improved routing tables • • • • Multiple servers for DHCP relay DHCPv6 prefix delegation ARP limit updates XTM Configuration Report updates Logging & Reporting Enhancements • Simultaneously send log messages to two Log Servers • Expanded information included in Device Feedback Management Tunnel Enhancement • Managed devices use the first distribution IP address for the Management Server What Else is New?
• The first iteration of a comprehensive Help system for Fireware with integrated instructions for all Fireware management UIs.
WatchGuard Training
4
WatchGuard Training
New Feature — Quotas
5
Bandwidth and Time Quotas
You can enable bandwidth and time usage quotas for users on your network for access to external sites. Apply a daily limit to user Internet usage to enforce corporate acceptable use policies. When users exceed the quota limit, a notification message appears in their web browsers and further access attempts are denied.
WatchGuard Training
6
Bandwidth and Time Quotas
You can set these types of quotas: • Bandwidth — The bandwidth quota is set in MB per day, and is enforced for all TCP and UDP traffic in both directions. • Time — The time quota is set in minutes per day.
Both bandwidth and time quotas can be enabled at the same time, and the limit that is reached first is enforced.
WatchGuard Training
7
Bandwidth and Time Quotas
Quota limits are applied to users and groups based on authentication to the Firebox. For a quota to take effect, a user must be authenticated and match a configured policy defined with Firebox users and groups.
WatchGuard Training
8
Bandwidth and Time Quotas
To enable bandwidth and time quotas, you must: • Enable quotas and create quota rules • • Apply a quota action to a rule Enable the quota rule in a policy
WatchGuard Training
9
Bandwidth and Time Quotas
Enable time and bandwidth quotas Add a quota rule that defines applicable users and groups, and the quota action to apply.
WatchGuard Training
10
Bandwidth and Time Quotas
A quota action defines the bandwidth and time restrictions to apply to a quota rule.
WatchGuard Training
11
Bandwidth and Time Quotas
To enforce a quota, a quota rule must be enabled for a specific policy. The policy must be defined with users or groups to be able to apply a quota rule.
WatchGuard Training
12
Bandwidth and Time Quotas
You can create exceptions to quotas so that any traffic to a specific destination address is not counted towards the usage quota. Create exemptions for your company's own domains, or software and antivirus signature update sites.
WatchGuard Training
13
Bandwidth and Time Quotas
Options to reset user quota data include: • Quota daily limits are automatically reset the next day (starting at 00:00) • Configuration changes automatically reset quotas for users and groups that use the updated quota action • • Reboot the Firebox Manually reset quota data for specific users from the Web UI and FSM
WatchGuard Training
14
WatchGuard Training
Monitoring Enhancements
15
Review & Reset Bandwidth and Time Quotas
Monitor user quota usage data in Fireware XTM Web UI and Firebox System Manager.
• Fireware XTM Web UI — •
System Status > Quotas
Firebox System Manager —
Quotas
tab page Quota data includes these details for each connected user:
Quotas Page (Web UI)
User Auth Domain Quota Action Used/Configured Bandwidth (per day)
User Quotas Tab (FSM)
User N/A Quota Action
Description
The user name of the connected user.
The authentication domain through which the user is authenticated.
The quota action defined on your Firebox that applies to the user.
Bandwidth Usage (per day) The amount of bandwidth the user has already used and is allowed to use (used/allowed), for each day.
Used/Configured Time (per day) Time Usage (per day) The amount of time the user has already used and is allowed to use (used/allowed), for each day.
WatchGuard Training
16
Review & Reset Bandwidth and Time Quotas
Manually reset user quota data for specific users: 1.
2.
Select one or more users.
Click
Reset Quota
.
WatchGuard Training
17
Gateway Wireless Controller — See Rogue Access Points
Use the Gateway Wireless Controller
Wireless Deployment Maps
to scan for foreign wireless access points See a list of rogue access points on the
Foreign BSSIDs
page A rogue access point is any wireless access point within range of your network that is not recognized as an authorized access point. Rogue access point can be installed by a malicious user, but could also be a device installed by someone inside your organization without consent.
WatchGuard Training
18
Gateway Wireless Controller — Client Signal Strength
The
Gateway Wireless Controller
in Fireware XTM Web UI and Firebox System Manager now includes an indicator to show the wireless client signal strength.
WatchGuard Training
19
Enhanced VPN Diagnostic Tools
VPN diagnostic messages • New VPN messages now indicate why a branch office VPN gateway or tunnel failed, and can include information about what action to take to resolve the error.
• VPN diagnostic messages appear in three places in the UI: Firebox System Manager —
Front Panel
tab WatchGuard System Manager —
Device Status
tab Fireware XTM Web UI —
System Status > VPN Statistics
page Enhanced VPN Diagnostic Report • Performs more checks to identify many of the most common VPN issues • Provides more actionable information
WatchGuard Training
20
VPN Diagnostic Messages
VPN diagnostic messages appear below the gateway in the Web UI and FSM.
• Messages can be for a specific tunnel or gateway endpoint.
Errors • Error status — Web UI • Red text — FSM and WSM.
Warnings • Warning status — Web UI.
• Orange text — FSM and WSM.
WatchGuard Training
21
VPN Diagnostic Report Enhancements
Improved VPN Diagnostic Report • The VPN Diagnostic Report now does more extensive diagnostics checks, and provides more information.
• The report includes three new sections:
[Conclusion]
— This section at the top summarizes what was observed, lists any detected errors, and includes suggestions of next steps to troubleshoot the VPN.
[Address Pairs in Firewalld]
— This section shows the address pairs and the traffic direction (IN, OUT, or BOTH).
[Policy checker result]
— This section shows policy checker results for policies that manage traffic for each tunnel route.
The VPN Diagnostic Report is now available in the Fireware XTM Web UI on the
System Status > VPN Statistics
page, as well as on the
System Status > Diagnostics
page.
WatchGuard Training
22
Branch Office VPN Troubleshooting Tips
For any branch office VPN, you can run reports and monitor error messages on both endpoint devices —the initiator and the responder.
• The initiator is the endpoint that starts the tunnel negotiation • The responder receives the proposal and accepts or rejects the proposed tunnel settings from the initiator For troubleshooting VPN negotiation, run the VPN Diagnostic Report or look at the VPN diagnostic messages on the responder.
• The responder has more information about settings that do not match.
On the responder, VPN diagnostic errors include more detailed information about what setting the initiator proposed, and what setting was expected. • The initiator does not know what settings were expected.
WatchGuard Training
23
VPN Troubleshooting in Firebox System Manager
Example — VPN diagnostic message for a mismatched Phase 2 proposal • VPN diagnostic message on the initiator: Initiator “Received ‘No Proposal Chosen’ message. Check VPN IKE diagnostic log messages on the remote gateway endpoint for more information.” • The VPN diagnostic message on the responder is more informative: “Received ESP encryption 3DES, expecting AES” Responder The same messages appear in the VPN Diagnostic Report.
• To run the report, right-click the gateway and select
VPN Diagnostic Report
.
WatchGuard Training
24
VPN Diagnostic Messages in the Web UI
VPN diagnostic messages appear in the
System Status > VPN Statistics
page.
WatchGuard Training
25
VPN Diagnostic Report in the Web UI
To run the VPN Diagnostic Report from the
System Status > VPN Statistics
• page: On the
Branch Office VPN
tab, click
Debug
for a Gateway.
• Or, select the
Debug
tab, select the gateway, and click
Start Report
.
WatchGuard Training
26
Routes Table Updates
In Fireware XTM Web UI, the Routes table in
System Status > Routes
includes these updates: • Filter routes by: IP address type (IPv4, IPv6, or both — IPv6 is new) Route Type (Connected, Static, Dynamic, VPN) Interface (Select the interface) Destination (Type a valid IPv4 network address) The Routes table shows the first 100 routes that match the filter criteria.
WatchGuard Training
27
Routes Table Updates
The Firebox System Manager
Status Report
tab now includes two route tables.
• IPv4 Routes — Shows the first 100 IPv4 routes (all routes, including static, dynamic, and VPN routes).
• IPv6 Routes — Shows the first 100 IPv6 routes (all routes, including static, dynamic, and VPN routes).
Route table includes the same information as the output of the CLI “show ip route” and “show v6 ip route” commands.
These two route tables replace the four route tables that previously appeared in the Status Report (main, ethx.out, any.out, and zebra).
WatchGuard Training
28
FireWatch Enhancements
FireWatch can now be viewed in Full Screen mode in Fireware XTM Web UI Full Screen mode options include: • Select to include one or more groups in the display • • • • Specify the information refresh rate The settings controls are hidden after a period of time Select all standard filters See information in bytes for all groups except WebBlocker, which appears in number of connections
WatchGuard Training
29
FireWatch Enhancements
Select group, data, and refresh options in Full Screen Mode
WatchGuard Training
30
FireWatch Enhancements
Select which group information appears: • Source • • • • • Destination Applications Policies Interface (In) Interface (Out) Select the type of data that appears: • Rate • • • Bytes Connection Duration
WatchGuard Training
31
WatchGuard Training
Subscription Services Enhancements
32
Subscription Services Setup Wizards
New Web UI activation wizards that guide you through the steps to enable these Subscription Services and create a basic configuration: • spamBlocker • • • WebBlocker Gateway AntiVirus Intrusion Prevention
WatchGuard Training
33
Signature Update Warnings
New warnings displayed for services when automatic signature updates are disabled.
• IPS • • • Gateway AntiVirus Application Control DLP
WatchGuard Training
34
WatchGuard Training
VPN Enhancements
35
Updates to Mobile VPN with SSL Clients
Updated WatchGuard Mobile VPN with SSL clients for Windows and Mac OS X • Both clients now use OpenVPN 2.3.6
• • Both clients now support more than 24 routes The Windows client now includes the TAP driver for Windows 8.1
WatchGuard Training
36
WatchGuard Training
Certificate Management Enhancements
37
Manage Certificates from the Web UI
You can now perform all the same certificate management tasks from the Web UI that are available in Firebox System Manager. • Delete, Install, and export certificates • • • View certificate details Import CRLs Create CSRs (certificate signing requests)
WatchGuard Training
38
Automatic CA Certificate Updates
Automatically get new versions of the trusted CA certificates stored on the device and automatically install the new certificates.
Ensures all trusted CA certificates on your device are the latest version. Expired certificates are updated, and new trusted CA certificates are added to your device. Updated certificates are downloaded from a secure WatchGuard server.
WatchGuard Training
39
WatchGuard Training
Wireless Access Point Enhancements
40
Wireless AP Enhancements
Wireless traffic shaping Time-based SSID Activation Scheduled restarts of AP devices Multiple AP device selection for AP actions Enable rogue access point detection
WatchGuard Training
41
Wireless Traffic Shaping
Configure traffic rate shaping for each wireless SSID.
Traffic shaping is for wireless download traffic only.
• Base rate — The base throughput rate for the SSID. Not allowed to exceed this limit except for burst activity.
• Ceiling rate — The hard limit throughput rate for the SSID. This limit includes burst activity.
• Burst — The maximum number of kilobytes allowed beyond the base rate.
WatchGuard Training
42
Time-based SSID Activation
Enable SSIDs for specific time periods.
Limits access to the SSID based on the start and end times you configure.
WatchGuard Training
43
Scheduled Restarts of AP Devices
Restart wireless services or reboot all of your AP devices at scheduled times on a daily or weekly basis. Refreshes the AP device and makes sure the device configuration and all access control lists are up to date.
Automatically updates wireless channel selection.
AP devices are restarted in 90 second intervals to make sure they are not all restarted at the same time.
WatchGuard Training
44
Multiple AP Device Selection for AP Actions
You can select multiple AP devices to complete reboot, upgrade, and restart wireless actions.
WatchGuard Training
45
Enable Rogue Access Point Detection
Enable rogue access point detection for each SSID.
Add known device MAC addresses to the exceptions list so they are not considered a rogue access point.
WatchGuard Training
46
WatchGuard Training
SSO Enhancements
47
Single Sign-On Enhancements
Single Sign-On Enhancements include: • Support for Microsoft Exchange Server 2013 for the SSO Exchange Monitor .NET Framework v3.5 required on Exchange Server 2013 server • Clientless SSO for RDP logins Event Log Monitor now recognizes both logon and logoff events for RDP connections and reports this information to the SSO Agent, which sends the events to the Firebox.
The Firebox opens and closes user sessions based on the logon and logoff event reports from the Event Log Monitor.
• • Traffic through BOVPN tunnels can now use Single Sign-On Support for switching between multiple users of the SSO Client on Windows 2008, 7, and Vista
WatchGuard Training
48
Single Sign-On Enhancements
New
Enable SSO through BOVPN tunnels
option allows users of BOVPN tunnels to use SSO for network connections
WatchGuard Training
49
WatchGuard Training
RapidDeploy Enhancements
50
RapidDeploy CSV File — Change External Interface
You can now use a CSV file to change the external interface number.
A device that starts with factory-default settings can automatically configure the external interface from settings in a CSV file on a connected USB drive. • Previously, the only valid interface you could specify in the CSV file was 0.
• • • A device that uses Fireware v11.10 now supports interface numbers other than 0.
The format of the CSV file did not change. This is most often used for RapidDeploy.
Example line in a CSV file to configure interface 2 as the external interface: 70XX00777X777,
2
,ext,Static,203.0.113.20/24,203.0.113.1,198.51.100.20
WatchGuard Training
51
WatchGuard Training
System Enhancements
52
NTP Server
After you enable a Firebox to use NTP, you can enable the device as an NTP server.
• When you enable the device as an NTP server, the
NTP Server
policy is automatically created. • The NTP Server policy allows connections to the NTP server from clients on the trusted and optional networks. Configure NTP clients to get the date and time from the interface IP address or domain name of the Firebox.
WatchGuard Training
53
WatchGuard Training
Networking Enhancements
54
Multiple Servers for DHCP Relay
In the DHCP Relay settings, you can now add the IP addresses of up to three DHCP servers.
• Previously you could configure only one IP address for DHCP Relay.
The Firebox relays DHCP requests to the IP addresses of all DHCP servers.
WatchGuard Training
55
DHCPv6 Prefix Delegation
You can enable DHCPv6 Client Prefix Delegation on an external interface. • The device requests an IPv6 prefix from a DHCPv6 server.
• You can use the delegated prefix when you configure IPv6 addresses on trusted, optional, and custom interfaces. DHCP prefix delegation is described in RFC 3633.
WatchGuard Training
56
DHCPv6 Prefix Delegation
The delegated prefix appears on the
Front Panel
tab of Firebox System Manager.
WatchGuard Training
57
DHCPv6 Prefix Delegation
You can use the delegated prefix for a trusted, optional or custom interface.
• Static IPv6 interface IP address • • • IPv6 prefix advertisement DHCPv6 address pool DHCPv6 reserved addresses Select
Use delegated prefix
.
• The delegated prefix name appears as the first part of the IPv6 address.
• The prefix name includes the external interface device name, followed by “_prefix”. For example “eth0_prefix”.
• Type the subnet in the adjacent text box.
Delegated prefix in a static IPv6 address Delegated prefix in the DHCPv6 address pool
WatchGuard Training
58
DHCPv6 Prefix Delegation
You can also enable the DHCPv6 server on an interface to delegate prefixes to DHCPv6 clients.
• Add prefixes to the
Prefix Pool
.
• To reserve a specific prefix for a client, add the prefix to the
Reserved Addresses and Prefixes
list.
WatchGuard Training
59
Improved Route Tables — Command Line Interface
To see the first 100 IPv4 routes, use the “show ip route” command • Replaces the “show route” command • Output is easier to read than the output of the old show route command WG>show ip route Kernel IP routing table Destination Gateway Genmask Interface Flags Metric 0.0.0.0 203.0.113.1 0.0.0.0 eth0 UG 5 10.0.70.0 0.0.0.0 255.255.255.0 eth1 U 0 10.0.71.0 0.0.0.0 255.255.255.0 eth1 U 0 10.0.78.0 0.0.0.0 255.255.255.0 vlan10 U 0 10.0.79.0 0.0.0.0 255.255.255.0 br0 U 0 10.10.10.0 0.0.0.0 255.255.255.0 ath1 U 0 127.0.0.0 0.0.0.0 255.0.0.0 lo U 0 192.168.113.0 0.0.0.0 255.255.255.0 tun0 U 0 203.0.113.0 0.0.0.0 255.255.255.0 eth0 U 0 • Use command options to filter the route table (same filters as in the Web UI) WG>show ip route ?
WatchGuard Training
60
Improved Route Tables — Command Line Interface
To see the first 100 IPv6 routes use “show v6 ip route” • Output — no change from 11.9.x
WG>show v6 ip route Kernel IPv6 routing table Destination Next Hop Interface Flags Metric 2001::/64 :: vlan10 U 256 fe80::/64 :: vlan10 U 256 • New command options to filter the route table (same filters as in the Web UI) WG>show v6 ip route ?
WatchGuard Training
61
Route Diagnostics — Command Line Interface
For Support Only (RFE65096) CLI “diagnose” command has a new “ip” option • Supports the same arguments as the linux ip-route command WG#diagnose ip help Usage: ip [ OPTIONS ] OBJECT { COMMAND | help } ip [ -force ] -batch filename where OBJECT := { link | addr | addrlabel | route | rule | neigh | ntable | tunnel | tuntap | maddr | mroute | mrule | monitor | xfrm } OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] | -f[amily] { inet | inet6 | ipx | dnet | link } | -o[neline] | -t[imestamp] | -b[atch] [filename] | -rc[vbuf] [size]} • Syntax: diagnose ip ‘
WatchGuard Training
62
Updated ARP Limits Per Model
For Support Only (RFE83400) New ARP limits per model based on system memory size
System Memory Size
Less than or equal to 128M
GC threshold values
128 512 1024 Between 128MB and 1G (including 1G) 512 Between 1G and 4G (including 4G) More than 4G 1024 1536 2048 4096 4096 8192 6144 12288 ARP limits have three threshold values: • The lowest threshold is when garbage collection starts.
• • The middle value is when garbage collection becomes more aggressive.
The top value is the maximum number of ARP entries.
Previously, ARP limits were set based on the model, and had a maximum of either 4096 or 8192
WatchGuard Training
63
Updated XTM Configuration Report
The XTM Configuration Report available from the Fireware Web UI now includes information about Default Packet Handling and FireCluster configuration settings.
WatchGuard Training
64
WatchGuard Training
Logging & Reporting Enhancements
65
Logging Enhancements
Simultaneously send Log Messages to two WatchGuard Log Servers • Two different WatchGuard Log Servers — Dimension or WSM Log Servers • • Configure two sets of Log Servers Add primary and backup servers for each Log Server set
WatchGuard Training
66
Logging Enhancements
Fireware XTM Web UI —
Logging
>
Log Servers 1
&
Log Servers 2
tabs
WatchGuard Training
67
Logging Enhancements
Policy Manager — Logging Setup > Configure >
Log Servers 1 Log Servers 2
tabs &
WatchGuard Training
68
Device Feedback Report Enhancements
New information in the Device Feedback sent to WatchGuard includes: • Start and end time stamps for the feedback data sent to WatchGuard • • • Peak proxy connection limit usage Number of proxy actions with Subscription Services enabled in the configuration Subscription Services details include: Whether the service is enabled Counts of the number of events for each service enabled on the Firebox A list of the events triggered on the Firebox for each service (includes the source IP address, protocol, and threat level of the event).
WatchGuard Training
69
WatchGuard Training
Management Tunnel Enhancements
70
Management Tunnel Enhancements
For a Management Tunnel over SSL, if the tunnel goes down, the Firebox can now reconnect to the first IP address in the list specified for the Management Server and rebuild the tunnel.
In the Firebox Managed Device settings: • Specify the private IP address for the Management Server as the first IP address in the list.
• Specify the public IP address for the Management Server as the second IP address in the list.
WatchGuard Training
71
WatchGuard Training
What Else is New?
72
Integrated Fireware Help
The v11.10 release includes the first iteration of a comprehensive Help system for Fireware with integrated instructions for all Fireware management UIs.
Includes context-sensitive help topics for these management and monitoring tools: • Fireware XTM Web UI • • • • • WatchGuard System Manager & all WSM tools WatchGuard Dimension WatchGuard WebCenter WatchGuard Server Center & WatchGuard servers WatchGuard Deployment Center (RapidDeploy)
WatchGuard Training
73
WatchGuard Training
Additional Resources
74
Additional Resources
Information about the new and enhanced features included in this release is available from these resources on the
Product Documentation
pages of the WatchGuard website: • From the Help systems: Fireware Help — What’s New in This Release • From the
What’s New
presentation: What’s New in Fireware v11.10
WatchGuard Training
75
WatchGuard Training
Thank You!
76