Sub Unit 1.2 – Fluid Force
Download
Report
Transcript Sub Unit 1.2 – Fluid Force
Sub Unit 1.2 – Fluid Force
Pressure in Fluid Systems
Describe the four states of matter.
Define density and pressure
Explain why pressure in a fluid depends on depth
in the fluid
Explain why an object submerged in a fluid
experiences a buoyant force
Predict whether an object will sink or float in a
given fluid.
Explain how a force can be multiplied in a
hydraulic lift.
Explain where atmospheric pressure comes from.
Describe how a barometer measures atmospheric
pressure
Explain the difference between absolute and gage
pressure.
Objectives
States of Matter
Matter can exist in four states:
–
–
–
–
Solid (ice)
Liquid (water)
Gas (steam vapor)
Plasma (Extremely hot ionized atoms)
Fluids
Fluids are materials that can flow, has no
definite shape of its own, and conforms to
the shape of its container.
Liquids
Gasses
Fluid systems use both liquids (hydraulic)
and gasses (pneumatic) to operate
mechanical devices.
City Water System
Hydraulic system under pressure
Density and Pressure
Density is how much mass is contained in a
given amount of space.
Amount of matter per unit of volume.
(rho)
Units
English
SI
Example
The mass
of 1 cm3 of
water has a
mass of
1g;
therefore
the density
is 1g/1cm3.
Weight Density
Weight Density is the comparison
of an object’s weight to it’s volume
w
Units
Weight Density of Water
Water
has a weight density of
3
62.4 lb/ft .
Pressure
A force applied over a surface is pressure.
Units
English
SI
Pressure Units
N/m2 = 1 Pascal (Pa)
1000 Pa = 1kilopascal (kPa)
lb/in2 = psi (pounds per square inch)
Pressure and Depth
Pressure increase with depth because of the
additional weight of the fluid above.
w
Buoyancy and Archimedes’
Principle
Ptop = rw x h
Pbottom = rw x (h + d)
F =PxA
– Ftop = Ptop x A = (rw x h) x A
– Fbottom = Pbottom x A = [rw x (h+d)] x A
Fbuoyant = Fbottom – Ftop = rw Ad
Ad = Vbrick
Fbuoyant = rw x Vbrick = weight of water displaced
Archimedes’ Principle
An object immersed in a fluid has an
upward force exerted on it equal to the
weight of the fluid displaced by the object.
Note: the buoyant force is based on the
weight of the fluid displaced not on the
weight of the object.
Pascal’s Principle
A change in pressure at any point in a
confined fluid is transmitted undiminished
throughout the fluid.
P = F / A or
F=PxA
A = p r2
Atmospheric Pressure
The weight of the air above an area.
At sea level, a column of air extending up
through the atmosphere, with a cross sectional
area of 1m2, encloses about 10,000 kg of air.
This air weighs about 1 x 105 N
Therefore, atmospheric pressure is about 105
Pa or 100kPa at sea level.
Decreases with altitude
This is why your ears pop (equalization)
Atmospheric Pressure
Barometer – instrument used for measuring
atmospheric pressure.
At sea level the average atmospheric
pressure is 101.3 kPa = 760mm of mercury
= one atmosphere = 14.7 psi = 2117 lb/ft2
Absolute and Gage Pressure
Absolute pressure is the total pressure measured
above zero (perfect vacuum).
Gage pressure is the pressure measured above
atmospheric pressure.
Absolute pressure = gage pressure + atmospheric pressure
Suppose a tire gage measures the pressure of a tire
to be 30 psi;
Absolute pressure = 30 psi + 14.7 psi = 44.7 psi
The air inside the tire pushes out with a pressure of
44.7 psi. The atmosphere pushes in with a pressure
of 14.7 psi. The difference is 30 psi – the gage
pressure.
Pressure is a Prime Mover
Pressure acts like a force to cause
movement.
Equilibrium
Summary
Matter can exist in four states: solid, liquid, gas, and
plasma.
Liquids and gases are called fluids.
The density of a substance is its mass per unit volume.
The density of water is 1g/cm3.
Weight density is weight per unit volume.
Pressure is force divided by the area over which the force
acts.
We treat pressure as a scalar.
In SI units, pressure is measured in pascals, where 1 Pa= 1
N/m
Pressure increases with depth in a fluid.
Summary
For a given fluid, the pressure does not depend on the size
or shape of the container.
When an object is submerged in a fluid, an upward force is
exerted on the object caused by the pressure difference
between the top and the bottom of the object. This force is
called a buoyant force.
The buoyant force exerted on a submerged object equals the
weight of the fluid displaced by the object.
A pressure applied to a confined fluid is transmitted
throughout the fluid.
Atmospheric pressure is caused by the weight of the air
above a given area.
Atmospheric pressure can be measured with a barometer.
Absolute pressure is the sum of the gage pressure and
atmospheric pressure.