Transcript StatSensor Creatinine

Point-of-Care Whole Blood Creatinine & eGFR
No. 318 StatStrip Creatinine Rev 4/23/2012
StatSensor Creatinine
• Point-of-Care CREATININE
and eGFR screening for renal
function
• 30-second results from a
FINGERSTICK
• Single-use, pre-calibrated
biosensor
• No calibration coding
StatSensor Additional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Built-in Barcode scanner
Traditional QC
Numeric or Pass/Fail QC
QC Lockout
Abnormal & Critical range flags
Canned or free text comments
Rejecting results at meter
Ability to perform slope and y-intercept adjustments
Accepts Patient ID or Accession #
Operator password lockout
Entry of ICD-9 Diagnostic codes
Ability to enter Ordering physician
Web-based meter configuration by location
StatSensor Renal Function Testing
Expedites Therapy
• StatSensor Creatinine enables department
personnel to screen for renal function in just
30-seconds
• StatSensor Creatinine testing enables timely
administration of drugs or therapies requiring
confirmation of adequate renal function.
Maintains Department Productivity
and Workflow
• StatSensor Creatinine enables department personnel
to perform renal function testing just prior to
scheduled procedures
• Eliminates rescheduling appointments when patients
arrive without prior renal testing
• Every rescheduled appointment means personnel
and expensive equipment may be idle, decreasing
department productivity and throughput.
• Department productivity improves as reschedules
are avoided
Improves Patient Satisfaction
• StatSensor Creatinine eliminates the need for
patients to arrange for renal function testing in
advance of their scheduled procedure.
> Arriving 1-2 hours in advance of appointment for
renal function testing
> Visiting a blood draw station days prior to
procedure, resulting in two trips
• Avoids re-scheduling when the patient’s renal
function test results are not available at the time of
appointment
For the POC Operator
Fast and Easy Creatinine Testing at the Point of Care
• Easy, capillary finger-stick
sample collection
• Single use, pre-calibrated
biosensor (no calibration
coding)
• Simple 3 step procedure
1. Insert biosensor
2. Apply blood to biosensor
3. Read results in 30
seconds
For the POC Operator
Fast and Easy Creatinine Testing at the Point of Care
• Large color screen displays all
sample information
– Patient ID
– Strip Lot
– Patient Analyzed Time
– Operator ID
• Color, symbols and text allow
easy recognition of normal,
abnormal and critical ranges
• Operator can reject sample
at the meter
– Repeat testing
– Optional set-up
For the POC Operator
Fast and Easy Creatinine Testing at the Point of Care
• Comments can be entered in
free text or selected from a
pull-down list customized by:
– Meter location
– QC, test or sample type
• Multiple comments can be
entered for each result
• Comments can be designated
as chartable or non-chartable
For the POC Operator
Fast and Easy Creatinine Testing at the Point of Care
• StatSensor calculates eGFR
• Calculates eGFR by MDRD or Cockcroft-Gault equations
• StatSensor ADT feed automates entry of patient data
for calculation of eGFR
Departments Benefiting from StatSensor POC Testing
Improved
Improved
Patient
Workflow
Satisfaction
Faster
Information
Emergency Dept
*
*
*
Cardiovascular Lab
*
*
*
Radiology
*
*
*
Oncology
*
*
*
Outpatient Clinics
*
*
*
*
*
ICU
StatSensor Creatinine Summary
• Provides rapid kidney function assessment
at the point of care
• Correlates to lab reference methods
• Simple to use
• Expedites therapy when renal function testing is needed
• Improves department productivity and workflow
• Improves patient service and satisfaction
Thank You