Transcript Installation Procedure for Fuji Synapse PACS

Valley Baptist Health System
Installation Procedure for
Synapse PACS version 3.2.1
(Windows XP)
Browse to the VBHS Synapse PACS installation website.
•
•
•
•
Open Internet Explorer.
Enter the following address: https://synapse.valleybaptist.net
You will be prompted for a user name and password.
Please enter “vbmc\” followed by the Windows username used to
log onto the computers at Valley Baptist.
• The password is identical to the one used at Valley Baptist.
• Please refer to the following slide(s) to complete installation.
*Synapse PACS is only compatible with Windows XP, Windows
Vista, and Windows 7 32-bit computers using Internet Explorer
versions 6, 7, or 8.
Step 1 – Browse to the Synapse download page
Step 2 – Enter user credentials
VBMC\USER00
Step 3 – Download Synapse client
• Click on Code Download button to
download the latest Synapse client.
Step 4 – Allow install to “Run”
Step 5 – Complete Installation and close browser
Step 6 – Verify that Synapse icon is present on the
Desktop
Step 7 – Set Synapse Properties
• Right-click on Synapse icon and select
“Properties”
– You may be prompted to re-enter your
username and password.
Step 7 – Set Synapse Properties
• Ensure that the tabs accessed through
Synapse Properties are set up similar to
the following slides:
Step 7 – Set Synapse Properties (Continued)
Click on the
“Name”
button to
change the
datasource
name to
“VBHS”
Step 7 – Set Synapse Properties (Continued)
Step 7 – Set Synapse Properties (Continued)
Step 7 – Set Synapse Properties (Continued)
Step 7 – Set Synapse Properties (Continued)
*click “Apply” when done
Step 8 – Open Synapse
• Double-click the Synapse client to open
the program.
– The page below will open, double click on
“VBHS”
– Enter username and password.
Step 8 – Open Synapse (continued)
user00
Step 9 – Locate desired patient information
• Select “All Patients”
– Search can be performed by patient name or
VBHS medical record number.
Step 9 – Locate desired patient information
(continued)
• Enter patient name or VBHS medical
record number in the fields under “Patient
Name” or “Patient ID”.
Step 10 – Display Patient Information
• Double-click on patient name to display
patient information and exam listing.
Step 11 – Select and Display Study to be
Reviewed
• Double-click on study to be reviewed to
launch the image and associated
information.
Step 12 – Image Review
• A “Monitor Calibration Needed” warning
may display the first time an image is
launched. Click on the “Do not Show this
Warning Again” option and click the “OK”
button.
Step 12 – Image Review (continued)
• The image and the “PowerJacket” will
display.
– After review the result in the “PowerJacket”,
you can close or minimize it.
– See the following slide.
Step 12 – Image Review (continued)
PowerJacket
Thank you
• Please remember to protect your username and
passwords.
• Please close Synapse when you step away from
your PC.
• Please do not allow anyone that is NOT on the
patient’s care team to access the data on
Synapse.
• For any further assistance with Synapse, please
call the ServiceDesk at 956.389.5050.