Environmental Services Operating Room Training
Download
Report
Transcript Environmental Services Operating Room Training
Controlling CDI —
Environmental services cleaning
and disinfecting in the operating
and procedure rooms
Contents courtesy of Allina Healthcare
Introduction
Cleaning an operating room or procedure room requires a
team approach. Surgical services, environmental services,
and infection prevention work closely to ensure a clean and
safe surgical environment.
Dedicate carts, cleaning tools, vacuums, and floor machines
to the OR. Dedicated equipment can help prevent
transmission of organisms, particularly from the wheels of
floor machines used in other areas.
Detergent and disinfectant solutions should be prepared as
needed according to manufacturers’ instructions and
properly labeled. Follow EPA approved contact time as
directed by the disinfectant manufacturer.
Contents courtesy of Allina Health
Disinfection
Detergent
• Contains surfactants that clean and remove “soil”
from surface
Disinfectants
• Hospital approved chemicals that kill bacteria and
fungus
Contents courtesy of Allina Health
Disinfection
Adequate amount
• Enough chemical to keep surface wet for required
contact time
Adequate contact time
• Amount of kill time required
• Determined by testing by the U.S. EPA
Friction
• Wiping the surface removes bugs
Saturation
• Having enough disinfectant on a cloth to ensure that
enough chemical gets to the surface for the right
amount of time
Contents courtesy of Allina Health
OR/Procedure room cleaning
definitions:
Room turn-over: Between case cleaning done
by OR staff
Terminal clean: End of day cleaning done by
Environmental Services staff
Cycle cleaning: Periodic deep cleaning (e.g.
walls and ceiling) done by Environmental
Services staff
Contents courtesy of Allina Health
Value of standardized cleaning
protocol
Studies have indicated that:
• Contamination of surfaces and equipment in the
patient room contribute to transmission of
hospital acquired pathogens
• The process of cleaning and disinfection can vary
from person to person, or even between rooms
with the same person
Contents courtesy of Allina Health
Value of standardized cleaning
protocol
Studies have indicated that:
• Taking the “randomness” out by standardizing our
•
cleaning processes will help assure that surfaces
are consistently cleaned well and exposed to
adequate amounts of disinfectants.
Reducing the number of organisms in the patient’s
environment reduces the opportunity for
transmission of hospital acquired pathogens and
infections.
Contents courtesy of Allina Health
Education plan
Presentation
Post test
Demonstration
Ongoing education plan
New employee initial orientation
Yearly training and recertification
Contents courtesy of Allina Health
Post education measures
Return demonstration
Evidence-based monitoring - UV testing
Quarterly Quality Assessment (checklists)
Contents courtesy of Allina Health
Quality control guidelines
UV testing
Direct observation
Quality standards
Contents courtesy of Allina Health
UV testing
Contents courtesy of Allina Health
Room cleaning summary
Turnover and terminal cleaning is important in
removing germs from the surgical
environment.
Use the right tools
Use the right chemical
Use the right amount of chemical for the right
amount of time
Contents courtesy of Allina Health
Infection control and cleaning
Suggested video
“From Top to Bottom: Cleaning Operating and
Procedure Rooms”
Found for purchase at:
https://envisioninc.net/programs/show/22
Contents courtesy of Allina Health
Please complete the Cleaning Operating and Procedure
Rooms Post Test (accompanies Top to Bottom Video)
Contents courtesy of Allina Health
Break time
Return in 15 minutes
Contents courtesy of Allina Health
Recommended equipment
Properly stocked EVS cart
Goggles or safety glasses
Microfiber cleaning cloth or disposable wipes
Bucket for cleaning solution
Nylon toy broom/lobby dust pan
Microfiber flat mop system
Microfiber high dust tool
Wet floor sign
Putty knife
Contents courtesy of Allina Health
Chemicals
EPA registered hospital grade disinfectant
Cleaner/disinfectants, such as:
• 3M 25 Quat
• PDI AF wipes
• 1:10 bleach wipes
Neutral cleaner
Ammonia free glass cleaner
Cream cleanser
Iodine remover and tape/adhesive remover
Contents courtesy of Allina Health
Personal protective equipment (PPE)
Eye protection
Gloves
Isolation gown
Mask
N95 respirator
Papr
Contents courtesy of Allina Health
Isolation cleaning procedures
Airborne precautions
Contact precautions
Droplet precautions
Enteric precautions
Strict contact precautions
Neutropenic
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Contents courtesy of Allina Health
Focus on high touch areas
High touch surfaces are those that have
frequent contact with hands. High touch
surfaces in care areas require more frequent
cleaning and disinfection than minimal
contact areas.
Cleaning and disinfection is usually done at
least daily and more frequently if the risk of
environmental contamination is higher (e.g.,
intensive care units).
Contents courtesy of Allina Health
High touch areas
OR/surgical table
Push plates/door handles
Overhead lights
Telephone
Computer keyboard
Surgical equipment table
Surgical chair
Contents courtesy of Allina Health
Room zoning/hot zone cleaning
The equipment and areas closest to the patient
are the most contaminated and considered the
“hot zone”.
As you move further from the patient, surfaces
are less contaminated. Starting with the
OR/surgical table will allow adequate contact
time with the disinfectant.
Once the hot zone has been cleaned and
contaminated, take a fresh cleaning cloth and
work clockwise throughout the entire
OR/procedure room.
Contents courtesy of Allina Health
Concentric circles around patient signify levels of
potential environmental contamination
Sha red equipment &
common surface s
Item s touche d du ring
patient care
Patients & direc t
contact item s
HOT ZONE
Contents courtesy of Allina Health
OR/Procedure room clean order
General inspection
Remove linen
Remove waste
High dust
Clean overhead light
Clean overhead fixtures
Cleaning operating/procedure table
Clean movable equipment and fixtures
Spot clean walls and wall fixtures
Make the operating/procedure table
Wet mop the floor
Contents courtesy of Allina Health
Equipment specific cleaning
instructions
OR/Procedure Table
Contents courtesy of Allina Health
Push Plates/Door handles
OR overhead lights and fixtures
Overhead lights and fixtures
Equipment specific cleaning
instructions
Telephone
Contents courtesy of Allina Health
Computer keyboard
Equipment specific cleaning
instructions
Surgical equipment table
Contents courtesy of Allina Health
Movable equipment and furnishings
Equipment specific cleaning
instructions
Surgical chair
Contents courtesy of Allina Health
Waste receptacles
Equipment specific cleaning
instructions
Sharps containers
Contents courtesy of Allina Health
Wall fixtures
Equipment specific cleaning
instructions
Ventilation faceplate
Contents courtesy of Allina Health
EVS does NOT clean or touch
Anesthesia work space
Contents courtesy of Allina Health
Wall suction
Next steps
Your manager will observe a return
demonstration after initial training is
complete.
UV gel assessment will be done
Contents courtesy of Allina Health
What questions do you have?
Contents courtesy of Allina Health