Pre-requisites Fabrication FABmep® / CADmep

Transcript Pre-requisites Fabrication FABmep® / CADmep

Go Beyond Design: Using Autodesk® Fabrication Software to Extend Design Intent

Presenter Introduction

 Worked within Engineering & CAD industry for the last 14 years.  The last 4 years have been spent working at MAP Software, which was acquired by Autodesk in Oct 2011.  Now focused on Premium Support for Autodesk Fabrication Portfolio. Peter Jackson Premium Support Specialist AEC/ENI © 2012 Autodesk

Agenda

 Class Summary / Learning Objectives Overview  Key Learning 1.

Set up Autodesk Fabrication products for effective use 2.

Extend design-intent models from Autodesk Revit 3.

Use Autodesk Fabrication design line functionality 4.

Class Summary Overview

In this lab, you will get hands on experience with Autodesk® Fabrication FABmep™ and Autodesk® Fabrication CADmep™. We will explain the best practice setup process to use design line technology within Autodesk Fabrication software to efficiently convert engineering design intent models from Autodesk® Revit® and AutoCAD® MEP software. We will also cover how to use Autodesk Fabrication software to support detailing, prefabrication, fabrication, and installation.

Learning Objectives Overview

At the end of this class, you will be able to:  Best practices to set up Autodesk Fabrication to optimize Design line  Extend Autodesk Revit models to Autodesk Fabrication FABmep  Explain How Autodesk Fabrication design line functionality for modeling works  Extend AutoCAD MEP models to Autodesk Fabrication CADmep © 2012 Autodesk

Learning Objective

Extend design intent models from Autodesk® Revit®

Autodesk Fabrication products for effective use to convert engineering design intent models Pre-requisites Autodesk® Revit®

 Systems configured with required Families  System Classification / System Type configured  Visibility / Graphic Overrides configured  Elevations for the building environment configured © 2012 Autodesk

Pre-requisites Prior to Conversion Autodesk® Revit®

Autodesk Fabrication products for effective use to convert engineering design intent models Pre-requisites Fabrication FABmep® / CADmep®

Pre-requisites Prior to Conversion Autodesk® Fabrication FABmep® / CADmep®

Learning Objective

Extend design intent models from Autodesk® Revit®

Hands on Exercise #1 Extend design intent models from Autodesk® Revit® Work Flow Part 1

Investigate : ADSK MEP Building Layout.rvt

 System with Families Pre configured  System Classification / System Types Pre configured  Visibility / Graphic Overrides Pre configured  Elevations for the building environment Pre configured © 2012 Autodesk

Hands on Exercise #1 Extend design intent models from Autodesk® Revit® Work Flow Part 2

Exporting system : ADSK MEP Building Layout.rvt

Hands on Exercise #1 Extend design intent models from Autodesk® Revit® Work Flow Part 3

Importing : Autodesk® Fabrication FABmep®  Enabling “Data Exchange” tool bar  Utilising “Data Exchange” to Import Revit Interchange file (*.RIF)  Configuration of RME Mappings  Exporting Autodesk® Fabrication FABmep® into Fabrication CADmep® © 2012 Autodesk

Use Autodesk® Fabrication CADmep® design line Work Flow Part 4

Investigate : ADSK MEP Building Layout.dwg

 Activating a Design Line within the model  Erase & Fill items on a Active Design Line  Observation of Button codes / Button mappings  Design Line fill priorities Exclusion of items within a Service Template © 2012 Autodesk

Learning Objective

Extend design intent models from Autodesk® AutoCAD MEP®

Extend design-intent models from AutoCAD MEP®

Work Flow Part 1

Investigate : ADSK Pipe Model.dwg

 Utilising the AutoCAD MEP to Fabrication CADmep ABSconvert.dll

Extend design-intent models from AutoCAD MEP®

Work Flow Part 2

Importing : Autodesk® Fabrication FABmep®  Enabling “Data Exchange” tool bar  Utilising “Data Exchange” to Import AME file  Exporting Autodesk® Fabrication FABmep® into Fabrication CADmep® © 2012 Autodesk

Summary

Go Beyond Design Extend Design Intent from Autodesk Revit and AutoCAD MEP to Fabrication®

Q&A

Go Beyond Design Extend Design Intent from Autodesk Revit and AutoCAD MEP to Fabrication®

Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graph ical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved. © 2012 Autodesk