Over 50 Times More Powerful Than Regular Lubricants!

Earth Friendly Technology Xtreme Pressure Lubricants 1 Supper Concentrated Fuel additives

Environmentally Friendly

2

Xtreme Performance and Environmentally Friendly!

• Plant/Vegetable-based products • Stable • Non-corrosive • Non-reportable

3

Environmentally Friendly

• Reduce energy consumption • Vegetable based • Reduce usage of petroleum-based lubricants • Safe for human contact • Minimal disposability issues • Several products are Food grade / biodegradable

EPA APPROVED Environmental, Health & Safety approval NSF Food Grade certification

4

Core Technology

Engine Life Treatment Heavy Duty Oil Stabilizer Industrial Oil Concentrate Cutting Oil Water Soluble Cutting Fluids Hydraulic Treatment EP-2 Grease Penetrating Lubricant Motor Oil Down hole Drilling Fluid

Technology

5

Charge Bonding/flowing Reaction to heat & pressure Film strength Environmentally friendly

Typical Lubricants

Flowing + Bonding Migrates away Migrates towards Limited No Extraordinary Yes

Bottom Line Benefits

6

• Dramatically reduces heat & friction  Reduces wear to extend equipment life  Displaces moisture, prevents corrosion  Lowers energy consumption  Helps prevent costly down time  Optimizes equipment efficiency  Fewer oil changes

7

Four Ball Wear Test

Wear Reduction

0.45

0.44

0.43

0.42

0.41

0.4

0.39

0.38

0.37

0.36

0.35

0.445

0.387

MOTOR OIL WITHOUT XPL+ MOTOR OIL WITH XPL+

Test Method:

ASTM D-4172 40kg 1 hour @ 75 o C

Make & Model:

PTI M-4

Base Product:

5W-30 motor oil without XPL+ technology

Test product:

5W-30 motor oil with XPL+ technology

8

Four Ball Wear Test

Co-efficient of Friction

MOTOR OIL WITHOUT XPL+ MOTOR OIL WITH XPL+

Test Method:

ASTM D-4172 40kg 1 hour @ 75 o C

Make & Model:

PTI M-4

Base Product:

5W-30 motor oil without XPL+ technology

Test product:

5W-30 motor oil with XPL+ technology

Bearing Friction Test

Over 50 times more powerful than regular lubricants!

9 4,000 P.S.I.

200,000 P.S.I.

Lubricants Applications

10

•

Commercial

– Heavy duty equipment, commercial trucking, railway & • shipping fleets

Industrial

– manufacturing, metalworking, mining, paper mills, drilling

11

Priority Markets

• Transportation Sector – Heavy duty equipment, Trucking, Railway & Shipping Fleets

12

Priority Markets

• Industrial Sector – Manufacturing, Construction, Food & Beverage, Water cooling plants, Utility & Power generation plants

13

Priority Markets

• Drilling and Mining Sector -Down hole Drilling, Oil drilling and Mining operations (hard & soft)

14

Priority Markets

• International and Local Supply & Distribution Networks » Existing supply or customer networks for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & » gas) Existing distributors supplying to end users for (Transportation, Industrial, Manufacturing, Drilling & Mining, Oil & gas) » Auto supply and service centers, hardware, mass merchandisers & retailers

Manufacturing

15 Application

Machining - i.e. CNC, lathes, grinding, boring, broaching, drilling, tapping, milling, sawing, stamping, etc.

ProOne Products

• BioStable (90%) and Synthetic (10%) Water Soluble Cutting Fluids • ACA Cutting Oil for cutting oil applications • Industrial Oil Concentrate Gear boxes Conveyor systems Hydraulic systems Pneumatic air-driven solenoids and air tools • Industrial Oil Concentrate • Multi-purpose EP-2 Grease • Multi-purpose EP-2 Grease • XPL-101 Penetrating Lubricant • See hydraulic systems under Diesel Powered Equipment • XPL-101 Penetrating Lubricant

Anticipated Results

• Feeds and speeds increased anywhere from +20% up to +500% depending on application • Tool life extended by as much as 10 fold • Improved surface finishes, eliminating additional finishing steps • Sump life extended by as much as 400% • Down time reduced due to less wear, longer sump life, longer tool life • Energy reduction of 10-20% • Less oxidation and corrosion on equipment, pumps, tanks, etc.

• Energy savings of 10-20% • Reduction in noise • Wear reduced by 50-75% • Reduction in shear factor • Energy savings of 10-20% • Protection from outside elements (rust, corrosion protection) • Noise reduction • See hydraulic systems under Diesel Powered Equipment • Less downtime due to water/corrosion • Equipment working life extended up to 5 X

16

Diesel-powered Equipment

Application

Any and all diesel and gasoline engines including vehicles, generators, etc. Logging gear

ProOne Products

• Heavy Duty Oil Stabilizer • Engine Life Treatment • 15W-40 CJ4 Motor Oil • Hydraulic Treatment • Multi-purpose EP-2 Grease • XPL-101 Penetrating Lubricant

Anticipated Results

• Oil change intervals extended by up to 50% • Fuel consumption reduced by 5-10% • Reduced oil consumption and oil burning • Improved performance through increased compression • Longer working life due to wear reduction • Less friction, 2-10% more horsepower • More reliability and fewer breakdowns • Extended life of drag lines and cables • Increased safety due to extended range of cables • Protection from outside elements (rust, corrosion protection) • Greater reliability, fewer breakdowns, less shop repair

Down hole Drilling

17 Application

Mud Pumps Hydraulicing slurry

ProOne Products

• Down hole Drilling Fluid All oil hydraulic systems • Hydraulic Treatment • Multi-purpose EP-2 Grease

Anticipated Results

• Relieve heat, friction & wear on all parts associated with hydraulicing mud/slurry • No disposability problems •Up to 70% reduction in friction • Reduced torque • No diesel fuel added to well • Extended drill bit life • Improved thread protection on pipe sections • Electrolysis eliminated up to 94% • Electromagnetic field/static wear eliminated • Water contamination in hyd. fluid minimized • Reduction in wear, heat, friction, oxidation, corrosion & acidity • Operating life of the fluid extended 2-4 times • Seals last longer • Less downtime due to wear & tear • Energy reduced 8-15% for light load and up to 33% for heavy load • Less maintenance on all pivot points

18

XPL-101 Penetrating Lubricant

If it rolls, rubs, slides, rusts, corrodes, seizes or collects moisture …Use XPL-101…

The Best Liquid Tool in the Box

BOTTOM LINE BENEFITS:

• Xtreme pressure film strength • Lubricates, stops squeaks & noise • Frees sticky/rusted parts • Protects metal from rusting • Retards electrical corrosion • Displaces moisture • Non-toxic, environmentally friendly

19 APPLICATIONS: Long lubricant dispensing lines Extreme hot or cold conditions Wet and hot end use for roll neck journal bearings Heavily loaded hinge pins, couplings, CV and universal joints Rolling mills, slabbing mills Truck chassis, wheel bearings, general lube points

Synthetic EP-1 Grease

Pumpable Synthetic from –60 o F to 650 o F !

SUPERIOR PERFORMANCE:

       Extreme temperature range Extreme pressure protection Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility Low oil bleed characteristics

REDUCES:

    Heat, friction, noise & wear Corrosion Downtime Power consumption

20 APPLICATIONS: Industrial Manufacturing Commercial Marine Automotive Mining Construction Agricultural

Multipurpose EP-2 Grease

Extreme Performance from –40 o F to 615 o F !

SUPERIOR PERFORMANCE:

      Load carrying ability Shear stability Water resistance Oxidation & corrosion resistance Cling capability Seal compatibility

REDUCES:

    Heat, friction, noise & wear Corrosion Downtime Power consumption

Lithium/ Moly Grease

21

Heavy Duty Lithium Grease With 5% Moly

IDEAL FOR USE: Heavily loaded bushings, ball and roller bearings Heavy duty truck wheel bearings & fifth wheel Automatic lube systems Bucket pins Swing arms Chassis points Sliding surfaces Turn tables Conveyors Couplings

  

SUPERIOR PERFORMANCE:

Extreme pressure protection Heavy load carrying ability Good shear stability     Highly resistant to water wash Rust & corrosion inhibitors Cling capability Low oil bleed characteristics  Good thermal, oxidative and mechanical stability

REDUCES:

    Heat, friction, noise & wear Corrosion Downtime Power consumption

Industrial Oil Concentrate

22 APPLICATIONS Use at 10% by total volume Cold-heading Stamping Slitting machines Threading Compressors, Generators Pumps, Gear boxes Heavy chains & Sprockets Ball & roller bearings

Superior Performance for Industrial Applications

BOTTOM LINE BENEFITS:

• Extends life of gears, cams & dies • Improves speed & feed rates • Improves surface finishes • Reduces down time • Cuts down wear & tear • Less power consumption • Reduces smoke & noise • Extends machine life

Hydraulic Treatment

Unsurpassed Lubrication .. And Environmentally Friendly!

APPLICATIONS: Hydraulic systems Power transmission equipment Injection molding machines Railroad equipment Refineries & oil field equipment Paper and pulp mills Mining & smelter equipment Automatic Transmissions Power steering units Pumps & Rams 23 DILUTION RATIOS: Hydraulic Systems: 10% by volume Wet bath clutches, brakes: 5% by volume Automatic transmissions: 2% by volume BOTTOM LINE BENEFITS:

• Lowers friction & operating temperatures • Protects against wear • Reduces electrolysis • Displaces moisture • Prevents oxidation & corrosion • Helps extend equipment life • Compatible with petroleum & synthetics • Helps to protect & condition seals • Optimum run times .. less down time

Engine Life Treatment

24 DIRECTIONS For 4-6 quart capacity engines pour 12oz into motor oil crankcase. For larger capacity engines use at 10% by total volume.

Reduces Friction, Heat & Wear

BOTTOM LINE BENEFITS:

• Withstands friction & high temperatures • Protects engine from wear • Prevents oxidation & corrosion • Protects & conditions seals • Extends oil change intervals • Helps optimize engine performance • Maximizes fuel economy • Protects from wear at start-up

Heavy Duty Oil Stabilizer

25 DIRECTIONS % by volume Regular gas engines Badly worn engines Diesel engines 20% 40% 20% Commercial/Industrial Marine engines 20% 20% Motorcycle/Marine engines 20% 4-stroke motorcycles with Wet Clutches 10% Manual Transmissions 20% Differential & Gear Boxes 20%

If it Smokes, Burns, Leaks Oil, or Needs Extra Protection

BOTTOM LINE BENEFITS:

• Stops oil burning & oil leaks • Slows blow-by, smoking & oil contamination • Protects against wear to extend engine life • More power with better fuel economy • Provides dry start protection • Easier starting at all temperatures • Increases oil pressure • Conditions seals to extend life • Stops thermal breakdown • Quiets engines & gear boxes • Extends oil life by 50% or more

26 APPLICATIONS: Screw machines CNC machining Lathes Roll threading Stamping Grinding Gear hobbing Sawing Slitting machines Threading Turning VMC’s Metalforming Use at full-strength For all ferrous and non-ferrous alloys Ideal for:

•

Alloy steel

• •

Stainless steel

•

Titanium

•

Waspalloy

•

Inconel

•

Mild steel

•

Aluminum Copper alloys

ACA Cutting Oil

Air Craft Approved (ACA) for Titanium

Cuts tool wear.

Cuts downtime.

Cuts costs...

BOTTOM LINE BENEFITS:

• Improves speed & feed rates • Reduces down time • Cuts down wear from metal removal • Improves surface finishes • Lowers power consumption • Reduces smoke & noise • Extends machine & tool life • Resistant to foaming • Corrosion resistant

Bio-Stable Water Soluble Cutting Fluid

27 APPLICATIONS/DILUTION RATIOS Reaming & Boring Drilling & Tapping Milling Turning Sawing Stamping Grinding Quenching 10:1 to 15:1 10:1 to 15:1 10:1 to 15:1 15:1 to 30:1 15:1 to 30:1 15:1 to 30:1 30:1 to 50:1 30:1 to 50:1

Earth-friendly Formula ..

ROI Friendly Performance

BOTTOM LINE BENEFITS:

• Increases production rates • Improves tolerances & finish • Extends tool and machine life • Reduces edge buildup, welding & tearing • Extends sump life • Biocides to control rancidity • Retards bacteria and fungus • Reduces down time • Lowers power consumption & noise • Resistant to foaming • Soft & hard water emulsification • Operator friendly – safe, no odors • No extreme hazard disposability issues

Synthetic Water Soluble Cutting Fluid

28 APPLICATIONS/DILUTION RATIOS Reaming & Boring Drilling & Tapping Milling Turning Sawing Stamping Grinding Quenching 10:1 to 15:1 10:1 to 15:1 10:1 to 15:1 15:1 to 30:1 15:1 to 30:1 15:1 to 30:1 30:1 to 50:1 30:1 to 50:1

The Ultimate Performance to Improve your Bottom Line

BOTTOM LINE BENEFITS:

• Increases speed & feed rates • Improves surface finish • Extends tool life • Reduces edge buildup, welding & tearing • Extends life of cutting solution • Retards bacteria growth • Reduces down time • Lowers power consumption • Cuts down noise • Resistant to foaming • Soft & hard water emulsification • No hazardous ingredients • No harmful vapors

Downhole Drilling & Mining

30

Down hole Drilling Fluid

ProOne Knows the Drill

BOTTOM LINE BENEFITS:

       Over 70% reduction in friction Less downtime - more production Extends drill bit life Reduces torque Lowers operating temperatures Eliminates up to 94% of electrolysis Displaces moisture AND    Biodegradable! No diesel fuel added to well No disposability issues

31

Rock Drilling Oil

Oil of FAME !!!

BOTTOM LINE BENEFITS:

       Extreme pressure protection Reduce friction & lower operating torque Excellent oxidation resistance High solvency characteristics Prevents sluggish valve action Protect components form running dry Environmentally friendly without lead, Chlorine, Phosphorus or Antimony

Waterless Wash & Shine

33

Waterless Wash & Shine

Cleans, Shines & Protects ...

.. Without Water ..

.. Without Scratching ..

BOTTOM LINE BENEFITS:

• Only 15 minutes for an average car • No buckets, hose or sponge required • No mess to clean up • Citrus-based formula cleans bugs, tar, tree sap, bird droppings, water spots • Just-waxed shiny coating beads water for 4 weeks • For paint, chrome or glass

34

Waterless Wash & Shine

WON’T SCRATCH THE FINISH 1. Surrounds and lifts dirt particles .

2. Wipes off dirt without scratching 3. Leaves clean, shiny, smooth, protected finish.

SPECIAL REQUESTS

Technology & Products:

 Technology Demo Video’s  Material Safety Data Sheets  Technology Specifications and Applications  Brochures

CONTACT US

 Email: [email protected]



35

Website: www.pro-one.co.za