Section 13.2 Day 2
Download
Report
Transcript Section 13.2 Day 2
Tuesday, Feb. 25th: “A” Day
Wednesday, Feb. 26th: “B” Day (1:05 out)
Agenda
Homework Questions/Collect
Finish Section 13.2: “Concentration and Molarity”
Solution dilution equation, using molarity in
stoichiometric calculations
Homework:
Practice Pg. 467: #1-3
Section 13.2 review, pg. 467: #1-14
Concept Review: “Concentration and Molarity”
Homework
Practice pg. 461: #2, 3, 5, 6
Practice pg. 465: #1-7
Solution Dilution
Often, solutions such as acids are sold in very
concentrated form, such as 12 M HCl.
However, in the lab, we rarely use such
concentrated acids.
How do scientists dilute these very
concentrated solutions to get the
concentration or molarity that is needed
for their experiment?
Solution Dilution Equation
mol
M =
L
OR
M x L = mol
Solution Dilution
M1V1=M2V2
Solution Dilution Demo
The concentration of the CuSO4 solution I made last time
was supposed to be 0.05 M, NOT 0.50 M. Do I have
to throw away the solution I made last time, or can I
somehow fix it?
Use the solution dilution equation:
M 1V 1 = M 2V 2
M1: the original concentration I made (0.50 M)
V1: what volume of that solution will I need (?)
M2: the new concentration I’m trying to make (0.05 M)
V2: the volume of the new concentration I’m making:
250 mL
(0.50 M) V1 = (0.05 M) (250 mL)
V1 = 25 mL
Dilution Example #1
How many liters of 0.155 M Ni(NO3)2 can be
made from 75.0 mL of 12.0 M Ni(NO3)2 ?
Use the solution dilution equation:
M1V1 = M2V2
M1: 12.0 M
V1: 75.0 mL
M2: 0.155 M
V2: ?
(12.0 M) (75.0 mL) = (0.155 M) (V2)
V2 = 5,806 mL → 5.81 L
Dilution Example #2
What volume of 19 M NaOH must be used to
prepare 1.0 L of a 0.15 M NaOH solution ?
Use the solution dilution equation:
M1V1 = M2V2
M1: 19 M
V1: ?
M2: 0.15 M
V2: 1.0 L
(19 M) V1 = (0.15 M) (1.0 L)
V1 = .00789 L → 7.9 mL
Using Molarity in Stoichiometric
Calculations
There are many instances in which solutions of
known molarity are used in chemical reactions
in the laboratory.
Instead of starting with a known mass of
reactant or with a desired mass of product, the
process involves a solution of known molarity.
The substances are measured out by volume,
instead of being weighed on a balance.
Sample Problem C, Pg. 466
What volume (in mL) of a 0.500 M solution of copper (II)
sulfate, CuSO4, is needed to react with an excess of
aluminum to provide 11.0 g of copper?
3 CuSO4 (aq) + 2 Al(s)
3 Cu(s) + Al2(SO4)3 (aq)
First, use molar mass to change gram Cu → moles Cu:
11.0 g Cu X 1 mole Cu = 0.173 mole Cu
63.5 g Cu
Next, use mole ratio to change mole Cu → mole CuSO4:
0.173 mole Cu X 3 mol CuSO4 = 0.173 mole CuSO4
3 mole Cu
Last, use molarity to find volume of solution and convert to mL:
0.173 mole CuSO4 X 1 L CuSO4 X 1,000 mL =
0.500 mole CuSO4 1 L
346 mL
CuSO4
Additional Example
A zinc bar is placed in 435 mL of a 0.770 M solution of CuCl2.
What mass of zinc would be replaced by copper if all of the
copper ions were used up?
Zn + CuCl2→ Cu + ZnCl2
First, convert to L and then use molarity to find moles of CuCl2:
435 mL CuCl2 X 1 L X 0.770 mol CuCl2 = 0.335
1,000 mL
1 L CuCl2
mol CuCl2
Next, use mole ratio to change mol CuCl2 → mol Zn:
0.335 mol CuCl2 X 1 mol Zn = 0.335 mol Zn
1 mol CuCl2
Last, use molar mass mol Zn→ gram Zn:
0.335 mol Zn X 65.4 g Zn = 21.9 g Zn
1 mol Zn
Another Example
What volume, in mL, of a 1.50 M HCl solution would be needed
to react completely with 28.4 g of Na2CO3 to produce water,
CO2, and NaCl?
Na2CO3 + 2 HCl
H2O + CO2 + 2 NaCl
First, change grams Na2CO3 → mole Na2CO3:
28.4 g Na2CO3 X 1 mol Na2CO3 = 0.268 mol Na2CO3
106 g Na2CO3
Next, use mole ratio to change mol Na2CO3→mol HCl:
0.268 mol Na2CO3 X 2 mol HCl = 0.536 mol HCl
1 mol Na2CO3
Last, use molarity to find volume of solution and convert to mL:
0.536 mol HCl X 1 L HCl X 1,000 mL =
1.50 mol HCl
1L
357 mL HCl
Homework
Practice pg. 467: #1-3
Section 13.2 review, pg. 467: #1-14
Concept Review: “Concentration and Molarity”
Next Time:
Quiz over this
section…