High Performance Coatings
Download
Report
Transcript High Performance Coatings
PRODUCT LINE
High Performance
Coatings
PRODUCT LINE
Fluorinated Polyurethanes
All in one coat
Moisture Cured Urethanes
Epoxies
Poly Urea
Concrete treatment and sealers
FPU®
FLUORINATED POLYURETHANES
Impervious to Oxygen & Moisture
Greater Resistance to Chemical Attack
Extremely Flexible and Free from Embrittlement
Abrasion Resistant
UV Resistant (4000 hrs QUV)
Hydrophobic & Oleophobic Surface
Non-Stick (PTFE pigmented versions)
Incredible Graffiti Release Properties (51PC101)
Total test hours 8500
FPU® DERIVATIVES
Industrial Fluorinated
Polyurethane
51PC100/101TM,
51PC200TM, 51PC201TM ,
51PC250TM
Oil Industry, Structural
Steel, Tank Exteriors, OEM
truck frames, marine, etc.
Exceptional salt spray
>5,000 hours
UV stable
Graffiti resistant
Chemical resistant
Abrasion Resistant
51EPC4000
Fluorinated All in One Long Life Poly Aspartic
51EPC4000 is a high-performance, highly fluorinated Poly Aspartic single application
coating system. 51EPC4000
is formulated as a High Build, Two Component , solvent based VOC Compliant “All in
One Coat” system that
offers general ease of handling and application.
51EPC4000 exhibits outstanding performance properties, it is designed to offer huge
labour savings while serving
as two or three coatings, compared to other higher build, multi-coat premium
systems.
The patented “fluoroshield” protection of 51EPC4000 makes it virtually impervious to
moisture and oxygen
permeation, it also provides resistance to graffiti attack. 51EPC4000 exhibits
unsurpassed performance for all
physical properties as well as resistance to chemicals, extreme weathering conditions
and UV degradation.
Oil Industry, Steel Constructions etc.
FPU® DERIVATIVES
Non-Stick (Release) Coatings
51PC200TM, 51PC201TM , 51PC250
Capable of dispersing PTFE, PFA, FEP in coating
Excellent release properties
Excellent industrial coating in areas of high fallout
and corrosive fumes
FPU® DERIVATIVES
Immersion Fluorinated
Polyurethane
51NT150TM, 51NT510TM
Marine Immersion, Fresh Water,
Waste Water
Splash Zones
No-ToxTM Trade Name
FPU® DERIVATIVES
Tank Linings
51PC500TM
Hydrocarbon tank lining (Jet
Fuel JP-5, Unleaded Fuel,
crude, bitumen etc.)
Highly chemical resistant and
suitable for a variety of
immersion applications
CONVENTIONAL
URETHANES
DecrylTM
Single Pack 41SP320TM
Acrylic Aliphatic Urethane
Variety sheen levels
Developing fluorinated
version
Blocked Isocyanate urethane
Production product
41PC600TM
2K urethane for Industrial
and bridge coating
MOISTURE CURED
URETHANES
41DK200
41CR200
Penetrating Sealer
41CT300TM
Zinc rich moisture cure
41AL400TM
Coal Tar replacement
41ZR280TM
Non-skid deck coating
Non-leafing aluminium flake
moisture cure
41MIO500TM
Micaceous iron oxide moisture
cure
MOISTURE CURED
URETHANES
Outperform competitive products
Exceptional bridge coating system
AASHTO (American Association of State Highway and
Transportation Officials) Approved
500+ bridges coated in the US
Outperforms zinc epoxy systems
Easy to apply in higher humidity levels
FPU® topcoat with moisture cured intermediate
and primer is unmatched
Specifications Available
PolyUrea
“Quick Snap” Coatings
Plural Component
Oil industry
Tank Linings
Containment
Moisture Barrier
Flooring
0 VOC
100% solids
EPOXY AND ALKYD
COATING SYSTEMS
MIL-P-24441 Series
Tank linings
Marine (Navsea specification)
Immersion Epoxies
OEM production primers
Fast Dry OEM epoxy ester
Alkyds (silicone, LSA, acrylic)
SPECIALITY COATING
PRODUCTS
Therm-a-Shield
Elastomeric insulative
coatings
CorrosealTM
Rust conversion primer
Gel-TekTM
Concrete cleaning and
etching
Crystal-TekTM
Concrete sealer