Transcript Produse RP

LDPE PRODUCTS – TEHNICAL INFORMATION
CHARACTERISTICS
ASPECT
GRADE
VISUAL
B22/0.25
Uniform color granules
without extraneous matter.
Are allowed max. 0.01%m/m
contaminants (oxidizes and
other defects)
LDPE GRADES
B20/0.3
B21/0.5
B22/0.7
B22/1
B20/2
B21/2
B20/3
B21/3
MFI
[g/10min]
DENSITY
[g/cm3]
SLIP &
ANTIBLOCKING
AGENT
ANTIOXIDANT
APLICATIONS
ASTM D1238 ASTM D792
0.25
0.92
0.3
0.92
0.5
0.92
0.7
1
0.92
0.92
2
0.92
2
0.92
3
0.92
3
0.92
*
*
*
*
*
*
Heat shrinkable film with
antioxidative stabilization
Extra heavy-duty bags
Film for liquid packaging, coextrusion film
Agricultural film
Agricultural film
Film for fine packaging with good
transparency
Film for fine packaging with good
transparency
Film for extrafine packaging with
good transparency and gloss
Film for extrafine packaging with
good transparency and gloss
1
LDPE – B20/0.3
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2) APPLICATIONS: extrusion, for blown film, extra heavy-duty bags.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
0,3
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A –50°C/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
20
Cross direction
18
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
350
Cross direction
450
2
LDPE – B22/0.25
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2) APPLICATIONS: extrusion, shrink film.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
0,25
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING
TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
20
Cross direction
18
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
350
Cross direction
450
3
LDPE – 21/0.5
1)
PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent
stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the
above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.
2)
APPLICATIONS: extrusion, film for liquid packaging, co-extrusion film.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
0,5
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
18
Cross direction
15
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
300
Cross direction
400
4
LDPE – B22/0.7
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2) APLICATIONS: extrusion, agriculture film, and protection film.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
0,7
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
18
Cross direction
15
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
300
Cross direction
400
HAZE
%
13
ASTM D1003
5
LDPE – B22/1
1) PRODUCT DESCRIPTION: low density polyethylene, homopolymer with antioxidant stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2) APLICATIONS: extrusion, agriculture film, and protection film.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
1
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
18
Cross direction
15
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
300
Cross direction
400
HAZE
%
13
ASTM D1003
6
LDPE – B21/2
1)
PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent
stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the
above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.
2) APPLICATIONS: extrusion, film for fine packaging with a good transparency.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
2
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
15
Cross direction
13
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
250
Cross direction
350
HAZE
%
8
ASTM D1003
GLOSS, 450
UL
60
ASTM D2547
7
LDPE – B20/2
1)
PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2)
APPLICATIONS: extrusion, film for fine packaging with a good transparency.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
2
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
15
Cross direction
13
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
250
Cross direction
350
HAZE
%
8
ASTM D1003
GLOSS, 450
UL
60
ASTM D2547
8
LDPE – B20/3
1) PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer without stabilization. Ethylene monomer is
the only monomer used for producing the macromolecular product. For producing the above-mentioned grade there are not
used plasticizers or colored master batches. The product has natural color.
2) APPLICATIONS: extrusion, film for fine packaging with a very good transparency and gloss.
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
3
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
15
Cross direction
13
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
250
Cross direction
350
HAZE
%
7
ASTM D1003
GLOSS, 450
UL
60
ASTM D2547
9
LDPE – B21/3
1)
PRODUCT DESCRIPTION: low density polyethylene, ethylene homopolymer with slip and antiblocking agent
stabilization. Ethylene monomer is the only monomer used for producing the macromolecular product. For producing the
above-mentioned grade there are not used plasticizers or colored master batches. The product has natural color.
2) APPLICATIONS: extrusion, film for extra fine packaging with a very good transparency and gloss
PROPERTIES
MU
VALUE
TEST METHOD
Uniform color granules, without extraneous
matter. Are allowed max.0, 01 %m/m
contaminants (oxidizes and other defects).
VISUAL
g/10min
3
ASTM D1238
g/cm3
0,92
ASTM D792
0C
100
ISO 306/A
APPEARANCE
MELT FLOW INDEX
(190 oC / 2.16 kg)
DENSITY (23 oC)
VICAT SOFTENING TEMPERATURE
(A -50 oC/h-10N)
TENSILE STRENGHT AT BREAK
MPa
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
15
Cross direction
13
ELONGATION AT BREAK
%
ISO 527/3
(23 oC, v=500mm/min)
Machine direction
250
Cross direction
350
HAZE
%
7
ASTM D1003
GLOSS, 450
UL
60
ASTM D2547
10
Thank You !
http://epetrochemicals.rompetrol.com/
11