Transcript UNIO S.A. "powerpoint" presentation

SINCE 1911
UNIO SA – ROMANIA
MANUFACTURER AND SUPPLIER OF CONVEYING
EQUIPMENT ON FLOW AND TECHNOLOGICAL EQUIPMENT
Hersteller und Lieferant von Forderanlagen und technologische Ausrustungen
SINCE 1911
GENERAL PRESENTATION
Adress:
UNIO SA
35, Lucian Blaga Blvd.
440227 – SATU MARE, ROMANIA
Tel: +40 261 766120
Fax: +40 261 761735
Email: [email protected]
www.unio.ro
UNIO SA ist in Satu Mare, in Stadt sind
UNIO SA is located in SATU MARE, a 120 000 120 000 Einwohner, liegt in Nord-West
inhabitants town, situated in North-West of Rumanien, 10 km entfernt von
ungarische Grenze und 60 km entfernt
Romania, at 10 Km from Hungarian border
von M3 Autobahn aus Ungarn.
and at 60 Km from M3 Highway
Location:
SINCE 1911
UNIO – General information
Capital/ Kapital: 7,5 millions USD Established/
Gegrundungsjahr: 1911, private since 2000
Employees/ Mitarbeiter : 920
Total surface/ Ges Oberflache: 18 ha
Production surface/ Prod Oberflache: 6 ha
Crane/ Kran ( max): 50 tons
Milling/ Fraesen ( max): 14000x3000x2500 mm
Turning/ Drehen – orizontal (max):dia 2100x8000 mm
-vertical (max): dia 5000x2500 mm
Spur Gears/ Zahnrader: Dia 1200 mm, modul 25, precision class ISO 5-6
Stress relieve/ Spannungsarm gluchen (max): 11000x3300x3000
mm
Turnover/ Umsatz (2012): 20 millions Euro
SINCE 1911
TECHNOLOGICAL CAPACITIES
•Engineering and service/ Konstruktion
•Cutting and bending/ Schneiden und Biegen
•Forge, foundry and heat treatment/ Schmiederei, Giesserei und
Warmebehandlung
•Mechanical processing/ Mechanische Bearbeitung
•Welding/ Schweissen
•Destructive and non-destructive testing/ DT und NDT Prufung
•Assembling and trial assembly testing/ Montage und Prufmontage
•Control and certifications/ Kontrolle und Zertifizierung
Since 1911
Technological capacities
Material cutting/ Material schneiden
Computer controlled plasma cutting machines/
Computer controlled oxi-gas cutting machines/
Computer gesteuerte Brennen mit Gas
Carbon steel plates
Thickness ( max.): 200 mm
Length : 12 000 mm
Width: 2500 mm
Material calandering/ Walzen
Three roll Calander :
Steel Plates
Thickness ( max.) : 22 mm at 3 000 mm width
Diameter (max): 6000 mm
Computer gesteuerte plasma Schneidmaschine
Stainless steel
Thickness ( max.): 20 mm
Length : 12 000 mm
Width: 2500 mm
Material bending/ Biegen
600 tons Bending machine :
Steel Plates
Thickness ( max.) : 12 mm at 4 000 mm
width
Sawing machines / Saegen
Round bars , tubes and pipes
Diameter ( max.) : 400 mm
Length : 12 000 mm
Forging / Schmieden
Open die die:
Rings :up to 1200mm diameter
Shafts: up to Dia. 450 mm
and 4000 mm lenght
Technological capacities
Certificates and authorizations:
Since 1911
•AD 2000- Merkblatt HP0, TRD 201 and ISO
3834-2 ( TUV)
Welding / Schweissen:
Welding processes/ Schweissverfahren: 111, 135, 136 –MIG, MAG
Authorized welders/ Schweißer mit Zulassung : 30 ( GL, SLV, TUV)
International Welding Engineers:
3
•DIN 18800- 7:2002-09 Klasse E (SLV)
•Aproval for welding – Germanischer Lloyd Rules
(GL)
•3 INTERNATIONAL WELDERS ENGINEERS
•50 TUV, GL and SLV authorized welders
Since 1911
Technological capacities
Mechanical processing : turning/
Vertical turning
Diameter: max. 5000 mm
Height: max 2800 mm
Drehen
Since 1911
Technological capacities
Mechanical processing : turning
Horizontal turning ( CNC)
Diameter: max. 2100 mm
Lenght: max 8000 mm
(Drehen)
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC) Fresen
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
und Bohren
and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Technological capacities
Mechanical processing :
Milling and boring
Since 1911
Technological capacities
Mechanical processing : Milling
Machining centers ( CNC)
X: max 14000 mm
Z: max 3800 mm
Y : max 2500 mm
and boring
Since 1911
Technological capacities
Gear cutting - Verzahnung
Spur Gear cutting machines
Diameter :max. 5000 mm
Modul: max.42 mm
Precision class: 9-11
Since 1911
Technological
Gear grinding (Schleifen)
Spur gear grinding machines ( Niles):
capacities
Diameter: max. 1200 mm
Modul: max. 24 mm
Precision class: 4-5
Since 1911
Technological capacities
Heat treatment
(Waermebehandlung)Stress relieving – spannungsarm
Hardening, Annealing, Induction hardening
Gluehen
Dimensions : 3700 x 3500 x 11000 mm
Since 1911
Technological capacities
Assembling works:
(Montage)
Mechanical assembling:
On assembling platforms, max.
crane capacity 50 Tons
Since 1911
Technological capacities
Assembling works:
Hydraulic, electric and pneumatic assembling:
Since 1911
Technological capacities
Surface protection:
- Sandblasting (Sandstrahung)
-Painting (Lackierung)
-Galvanizing, Browning
Since 1911
Technological capacities
Surface protection:
- Sandblasting
-Painting
-Galvanizing, Browning
Since 1911
Quality assurance
Control
possibilities
Nondestructive testing:
Ultrasonic testing
Magnetic particle inspection
Liquid penetrant testing
X- rays testing
Since 1911
Quality assurance
Control
possibilities
Destructive tests:
Stress tests Impact tests
Chemical tests
Metallographic tests
Zerstörerische Prüfung
Stresstests
Kerbschlagbiegeversuch
Chemische Prüfungen
Metallografische Tests
Hardness tests:
(Haertepruefung)
Brinell Vickers Rockwell
Microhardness
Since 1911
Quality assurance
Control possibilities (3DMessmaschienen)
Computer Measuring Machines (CMM)
CMM Ghibli Trax – Brown&Sharpe – D
Table dimensions:2600x1200x1000 mm
Precision:
0.0025 mm
Since 1911
Quality assurance (3D-Messmaschiene)
Control possibilities
Computer Measuring Machines (CMM): CMM
Stiefelmeyer
Table dimensions:6000x3000x2000 mm
Precision:
0.0025 mm
Since 1911
Quality assurance
Certificates and
Authorisations
ISO 9001:2001
ISO 14001:2005
ISO 18001:2008
Since 1911
CONVEYING EQUIPMENT ON FLOW
Foerderanlagen – UNIO Basisprodukten
•
Conveying equipment on flow
Belt conveyers for general use
Conveying equipment on flow /
Belt conveyers for general use/
Conveying equipment on flow

Belt conveyers for open pits/


Conveying equipment on flow
Belt conveyers for open pits/
Conveying equipment on flow
Scraper conveyers - for underground
Kettenfoerderanlagen
Conveying equipment on flow
Apron conveyers-for waste and ashes transport/
Plattenfoerderanlagen
Conveying equipment on flow
Apron conveyers-for automotive assembling lines
Foerderanlagen fuer Automobileindustrie
Conveying equipment on flow
Wagons for lime transport in cement factories area
Wagen fuer Zementfabrik
Since 1911
Conveying equipment on flow
MINE LOCOMOTIVES AND LOADERS
Lokomotive und Lademaschienen fuer Bergbau
Material processing equipment
Oven( Dia. 4800mm) for nonferrous metals
processing
Ofen fuer Nichteisenmetalle
Material processing equipment
Oven( Dia. 4800mm) for nonferrous metals
processing
Material processing equipment
Bucket wheel( Dia. 14.0 m) for bulk material transport
Schaufelradbagger (Durchmesser 14,0 m) für Schüttgut Transport
Material processing equipment
Bucket wheel( Dia. 14.0 m) for bulk material
transport
Since 1911
Conveying equipment on flow
Autogenous and ball mills/
(Kugelmuehlen)
CONVEYING EQUIPMENT ON FLOW
Overhead conveyers and Hoisting equipment - Hebezeuge
Since 1911
Technological equipment
and
industrial projects
Tehnologischesausruestungen Zulieferant
• Fuer Walzindustrie, Schiffbauindustrie,
Automobileindustrie, ……
•
•
•
Equipment for off-shore projects and maritime industry
•
Transfer systems for metallurgy
•
Equipment for assembling lines for automotive industry
Equipment for plastic technology
Mechanical transmissions
Equipment for offshore projects
90 tons winch frame – bolted in parts for transport
Schiffbau - 90 Tonnen Windenbock - auch in Teilen
für den Transport verschraubt
Equipment for offshore projects
90 tons winch frame – bolted in parts for transport
Equipment for offshore projects
60 tons Trichter– for CAEN Harbor
60 To – Trichter fuer Hafen
Equipment for offshore projects
60 tons Trichter– for CAEN Harbor
Equipment for offshore projects –
Turned GROOVED DRUMS up to 2.1 m dia.
Trommel mit Rillen - Drehmaschienen
Equipment for offshore projects
Hoisting system for technologic robots- 200 tons
Hebelausruestung
Fully assembled in UNIO
Technological equipment and industrial projects
Equipment for maritime industry – Draghead – 65 tons
65 To – Baggerkopf fuer Schiff
3 parts cutted for
transport
Technological equipment and industrial projects
Equipment for maritime industry – Draghead – 40 tons
Technological equipment and industrial projects
Equipment for maritime industry – Draghead – 60
tons
Technological equipment and industrial projects
Equipment for maritime industry – Bow conection
– 40 tons
Technological equipment and industrial projects
Tanks for railways wagons – Behaelter fuer Wagen
Technological equipment and industrial projects
Equipment for maritime industry - Gantries
Kraene fuer Schiffe
Technological equipment and industrial projects
Equipment for maritime industry - Overflows
Stahlkonstruktion fuer Schiffe
Technological equipment and industrial projects
Equipment for maritime industry
Technological equipment and industrial projects
Equipment for maritime industry
Technological equipment and industrial projects
Equipment for maritime industry
Since 1911
Technological equipment
and
industrial projects
• Transfer systems for metallurgy - Fördersysteme für die
Metallurgie
Technological equipment and industrial projects
Transfer systems for metallurgy
Technological equipment and industrial projects
Transfer systems for metallurgy
Technological equipment and industrial projects
Transfer systems for metallurgy
Technological equipment and industrial projects
Transfer systems for metallurgy
Since 1911
Technological equipment and
industrial projects
• Equipment for assembling lines for automotive industry
Ausrüstung für Montagelinien für die
Automobilindustrie
Technological equipment and industrial projects
Equipment for assembling lines for automotive industry
Technological equipment and industrial projects
Equipment for bulk handling - Foerderanlagen
Since 1911
Technological equipment and
industrial projects
Getriebe
•
Mechanical transmissions
Technological equipment and industrial projects
Mechanical transmissions
Since 1911
Mechanical transmissions
Gears for truck transmissions- General Electric
Mechanical transmissions
Gears for wind turbines - Zollern
Mechanical transmissions