Transcript Report Generator

Workshop 13D
Postprocessing
Results Viewer
13D. Postprocessing
Results Viewer
Workshop Supplement
•
Use the “Results Viewer” to postprocess the model solved in
Workshop 13C.
INTRODUCTION TO ANSYS 7.0 - Part 1
Description
November 1, 2002
Inventory #001756
W13-2
13D. Postprocessing
Results Viewer
2. Resume the “multi-ls.db” database file from workshop 13C:
–
–
Utility Menu > File > Resume from …
• Select the “multi-ls.db” database file, then [OK]
Or issue: RESUME,multi-ls,db
3. Enter the General Postprocessor and read in a set of results:
–
–
Main Menu > General Postproc > Read Results > First Set
Or issue:
/POST1
SET,1
4. Write out a PGR file including all three load steps:
–
–
Main Menu > General Postproc > Write PGR File
• Write data for all sets
• Select “Stress” [OK]
Or issue:
POUTRES,S
SET, , , , , , ,1
PGSAVE,'multi-ls','pgr','.',0, 0,0
SET, , , , , , ,2
PGSAVE,'multi-ls','pgr','.',0, 0,0
SET, , , , , , ,3
PGSAVE,'multi-ls','pgr','.',0, 0,0
INTRODUCTION TO ANSYS 7.0 - Part 1
1. Enter ANSYS in the working directory specified by your
instructor using “multi-ls” as the jobname.
Workshop Supplement
November 1, 2002
Inventory #001756
W13-3
13D. Postprocessing
Results Viewer
–
Main Menu > General Postproc > Results Viewer
INTRODUCTION TO ANSYS 7.0 - Part 1
4. Open the Results Viewer:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-4
13D. Postprocessing
Results Viewer
Workshop Supplement
1.
Move the scroll bar to “Load Step 2”.
2.
Use the pulldown list to select “von Mises Stress”.
3.
Use the contour plot button to display nodal results.
1
3
2
INTRODUCTION TO ANSYS 7.0 - Part 1
5. Use the viewer to plot the Equivalent Stress for Load Step 2:
November 1, 2002
Inventory #001756
W13-5
13D. Postprocessing
Results Viewer
Workshop Supplement
1.
Right click on legend, pick “Contour Right”.
2.
Right click in graphics window, select “Replot”.
Right click
Right click
INTRODUCTION TO ANSYS 7.0 - Part 1
6. Move the contour legend to the right side of the graphics window.
November 1, 2002
Inventory #001756
W13-6
13D. Postprocessing
Results Viewer
Workshop Supplement
1.
Use the pulldown list to select “X-Component of Displacement”.
2.
Select the animate button.
3.
Select Deformed Results, then [OK]
4.
[OK]
1
2
4
3
INTRODUCTION TO ANSYS 7.0 - Part 1
7. Animate the X-Componenet of Displacement:
November 1, 2002
Inventory #001756
W13-7
13D. Postprocessing
Results Viewer
Workshop Supplement
1. [Stop]
2. [Close]
–
Select File -> Close
9. Exit ANSYS:
–
Pick the “QUIT” button from the
Toolbar (or select: Utility Menu >
File > Exit...)
•
–
1
Select “Quit – No Save”
• [OK]
Or issue:
FINISH
/EXIT,NOSAV
2
INTRODUCTION TO ANSYS 7.0 - Part 1
8. Stop the animation and exit the
Results Viewer:
November 1, 2002
Inventory #001756
W13-8
Workshop 13E
Postprocessing
Report Generator
13E. Postprocessing
Report Generator
•
Use the “Report
Generator” to create an
HTML – “Internet Ready”
report.
INTRODUCTION TO ANSYS 7.0 - Part 1
Description
Workshop Supplement
November 1, 2002
Inventory #001756
W13-10
13E. Postprocessing
Report Generator
Workshop Supplement
2. Read input from the “plate-13e.inp” file:
–
Utility Menu > File > Read Input from …
–
• Select the “plate-13e.inp” file, then [OK]
Or issue:
/INPUT,plate-13e,inp
3. Open the Report Generator:
–
Utility Menu > File > Report Generator
•
Select “Overwrite”, then [OK]
•
Select “Yes” to create a new directory
INTRODUCTION TO ANSYS 7.0 - Part 1
1. Enter ANSYS in the working directory specified by your instructor using “report” as
the jobname.
November 1, 2002
Inventory #001756
W13-11
13E. Postprocessing
Report Generator
4a. Plot elements:
–
–
Utility Menu > Plot > Elements
Or issue:
EPLOT
Report Generator:
–
[Image Capture] button
–
• Caption “Plot of Elements”, then [OK]
Or issue:
~tcl,'ansys::report::imagecapture “Plot of Elements” '
INTRODUCTION TO ANSYS 7.0 - Part 1
4. Capture images:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-12
13E. Postprocessing
Report Generator
–
General Postproc > Plot Results > Contour Plot > Nodal Solution
–
• Select “Stress”, “X-direction SX”, then [OK]
Or issue:
/POST1
PLNSOL,S,X,0,1
Report Generator:
–
[Image Capture] button
–
• Caption “X-direction Stress”, then [OK]
Or issue:
~tcl,'ansys::report::imagecapture “X-direction Stress” '
INTRODUCTION TO ANSYS 7.0 - Part 1
4b. Plot Stress in X-direction:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-13
13E. Postprocessing
Report Generator
Workshop Supplement
–
General Postproc > Path Operations > Plot Path Item > On Graph
–
• Select “L-SX”, then [OK]
Or issue:
PLPATH,L-SX
Report Generator:
–
[Image Capture] button
–
• Caption “Graph of SX Stress on Path L-SX ”, then [OK]
Or issue:
~tcl,'ansys::report::imagecapture “Graph of SX Stress on Path L-SX" '
INTRODUCTION TO ANSYS 7.0 - Part 1
4c. Plot Stress along a path:
November 1, 2002
Inventory #001756
W13-14
13E. Postprocessing
Report Generator
Workshop Supplement
Report Generator:
–
–
[Animation Capture] button
•
Caption “Animation of Deformed Results - SX Stress”
•
Select “Deformed Results”, then [OK]
• Select “Stress”, “X-direction SX”, then [OK]
Or issue:
~tcl,'ansys::report::animcapture "Animation of Deformed Results - SX Stress" 100'
/REPLOT,RESIZE
PLNSOL,S,X
ANCNTR,10,0.5
INTRODUCTION TO ANSYS 7.0 - Part 1
5. Capture an animation:
November 1, 2002
Inventory #001756
W13-15
13E. Postprocessing
Report Generator
Report Generator:
–
–
[Table Capture] button
•
Caption “Material Properties”
•
Select “Material properties”
•
[Apply]
•
Caption “Reaction Forces”
•
Select “Sum of reaction forces”
• [OK]
Or issue:
~tcl,'ansys::report::tablecapture 2 "Material Properties“ 1'
~tcl,'ansys::report::tablecapture 4 "Reaction Forces"'
fsum,,1
INTRODUCTION TO ANSYS 7.0 - Part 1
6. Capture Tables:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-16
13E. Postprocessing
Report Generator
Workshop Supplement
Report Generator:
–
–
–
[Listing Capture] button
•
Caption “List of Stress along Path L-SX”.
•
Type “PRPATH,L-SX” in command line.
•
[OK]
[Listing Capture] button
•
Caption “List of Constraints on Selected Items”.
•
Type “SBCLIS” in command line.
• [OK]
Or issue:
~tcl,'ansys::report::outputcapture "List of Stress along Path L-SX" "prpath,l-sx"'
prpath,l-sx
~tcl,'ansys::report::outputcapture "List of Constraints on Selected Items" "sbclis"'
sbclis
INTRODUCTION TO ANSYS 7.0 - Part 1
7. Capture Lists:
November 1, 2002
Inventory #001756
W13-17
13E. Postprocessing
Report Generator
Report Generator:
–
[HTML Report Assembler] button
8a. Insert a Report Heading:
–
Select “Report Heading”
•
Title, “Analysis of a Plate with Hole”
•
Author Name, “John Doe”
•
Subtitle, “X-Company”
•
[OK]
INTRODUCTION TO ANSYS 7.0 - Part 1
8. Create the HTML report using all the captured information:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-18
13E. Postprocessing
Report Generator
–
Select “TEXT”
•
Type in the following, “The purpose of this
analysis was to analyze a plate with a hole.”
8c. Insert Dynamic Data:
–
Select “Dynamic Data” and click on yellow text window
–
Type in the following
/nopr
*get,revision,active,0,rev
*vwrite,revision
(f3.1)
8d. Insert Text:
–
Select “TEXT”
•
Type in the following, “revision of ANSYS.”
INTRODUCTION TO ANSYS 7.0 - Part 1
8b. Insert Text:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-19
13E. Postprocessing
Report Generator
–
Select the following images under “Report Images”
•
Plot of Elements
•
Plot of Stress in X-direction
•
Animation of Deformed Results
•
Graph of Plot
INTRODUCTION TO ANSYS 7.0 - Part 1
8e. Insert captured images:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-20
13E. Postprocessing
Report Generator
–
–
Select the following images under “Report Lists”
•
List of Stress along Path
•
List of Constraints on Selected Items
Select the following images under “Report Tables”
•
Material Properties
•
Reaction Forces
INTRODUCTION TO ANSYS 7.0 - Part 1
8f. Insert Lists and Tables:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-21
13E. Postprocessing
Report Generator
–
Select the “Preview Report” button
INTRODUCTION TO ANSYS 7.0 - Part 1
9. Preview the Report
Workshop Supplement
November 1, 2002
Inventory #001756
W13-22
13E. Postprocessing
Report Generator
–
Select “File”, “Save and Close”
11. Exit ANSYS:
–
Pick the “QUIT” button from the Toolbar
(or select: Utility Menu > File > Exit...)
•
–
Select “Quit – No Save”
• [OK]
Or issue:
FINISH
/EXIT,NOSAV
INTRODUCTION TO ANSYS 7.0 - Part 1
10. Save and Close the Report Generator:
Workshop Supplement
November 1, 2002
Inventory #001756
W13-23