Transcript Double Feeding, Multiple Cutting Machine

7IÉa
#All Type of Betal Nut(Supari) Cutting Machine
Manufacturing Company
About us :
About Betel nut (Supari):
Betel nut, also known as Pinang or Areca
nut, is the seed of the Betel Palm (Areca
catechu).
Betel nuts are often chewed for their
helpful effects, which are caused by the
relatively high levels of alkaloids in the
seed. Chewing betel nuts is an important
and popular cultural activity in many Asian
countries.
It is also used as an offering in Hinduism.
Modern day consumption In India (the
largest consumer of betel nut), the betel
nut is cut into small pieces using a special
instrument called sarota, and the husk is
wrapped in a betel leaf along with lime
and may include clove, cardamom,
catechu (kattha), etc. for extra flavouring.
Betel leaf has a fresh, peppery taste, but,
depending on the variety of areca from
which it comes, it can be very bitter.
Seasoned chewers might mix the betel nut
with tobacco. This preparation of betel nut
is commonly referred as paan in India and
is available everywhere.
About Betel Nut (Supari) Cutting Machine :
Betel Nut Cutting Machine
Betel Nut Cutting machine is designed after deliberate thinking with a
view to operate it easily and at a very low cost on account of electricity.
About Machine
Betel nut cutting machine runs on a SINGLE PHASE using 0.5 HP
Electric Motor of Standard Company, so there is no fear of our of
order exists. Machine is exclusive packed so when in operation it
generate very low Noise and refrains from any injury. Betel nut Cutting
Machine operates on Slid hence as per your requirement as cutting
comes manually cutting similarity cutting from machine comes with
extra finishing. The machine provides multiple options of cutting such
as; [ Granule one Cut ] - [ Two Cut ] – [ Round Slice ] Thick and
thin.........
there is no need of purchase different cutting machine but it all
comes in one.
What is Multiple cutting?
01.Rough 02.Mamari Cutting 03.Bharadiyo Cutting 04.Chips cutting (
One Cut ) 05.Tinpatti Cutting(TwoCut)06.Circul Cutting
Semi Automatic
(SingalFeeding,MultipleCuttingMachine)
Semi Automatic
(Single Feeding, Multiple Cutting Machine)
Technical Specification
0.5 HP Motor Single Phase, 1440 RPM,50 Hz
Production Capacity : 4 - 8 Kg/Hr.
Weight : 65 Kg.
Dimension : L = 18” H=29” W=17”
Power Consumption : Rs.0.50 Paisa / Kg.
Circul
Chips
Rough
Tinpatti
Bharadiyo
Mamari
Semi Automatic
(Double Feeding, Multiple CuttingMachine)
Semi Automatic
(Double Feeding, Multiple Cutting Machine)
Technical Specification
0.5 HP Motor Single Phase, 1440 RPM,50 Hz
Production Capacity : 12 - 15 Kg/Hr.
Weight : 85 Kg.
Dimension : L = 18” H=29” W=17”
Power Consumption : Rs.0.50 Paisa / Kg.
Circul
Chips
Rough
Tinpatti
Bharadiyo
Mamari
Automatic
(Hoper Modal,Multipal Cutting Machine)
Automatic
(Hoper Model, Multiple Cutting Machine)
Technical Specification
0.5 HP Motor Single Phase, 1440 RPM,50 Hz
Production Capacity : 12 - 15 Kg/Hr.
Weight : 85 Kg.
Dimension : L = 18” H=41” W=17”
Power Consumption : Rs.0.50 Paisa / Kg.
Circul
Chips
Rough
Tinpatti
Bharadiyo
Mamari
Automatic
(Hoper Modal,Multipal Cutting Machine)
Automatic
(Double Feeding, Multiple Cutting Machine)
Technical Specification
1 HP Motor Single Phase,1440 RPM, 50 Hz.
Production Capacity : 25 – 30 Kg/Hr.
Weight : 125 Kg.
Dimension : L = 21” H=43” W=20”
Power Consumption : Rs.0.50 Paisa/ Kg.
Circul
Chips
Rough
Tinpatti
Bharadiyo
Mamari
Automatic
(Double Feeding,Multipal Cutting Machine
Automatic
(Double Feeding, Multiple Cutting Machine)
Technical Specification
0.5 HP Motor Single Phase,1440 RPM, 50 Hz.
Production Capacity : 12 – 15 Kg/Hr.
Weight : 125 Kg.
Dimension : L = 21” H=30” W=20”
Power Consumption : Rs.0.50 Paisa / Kg.
Circul
Chips
Rough
Tinpatti
Bharadiyo
Mamari
Tukda Cutting Machine
(Bulk Feeding)
Tukda Cutting Machine (Bulk Feeding)
Technical Specification
1 HP Motor Single Phase, 1440RPM, 50Hz
Production Capacity : 20 – 30 Kg/Hr.
Weight : 90 Kg.
Dimension : L = 17” H = 38” W=15”
Power Consumption: Rs.0.50 Paisa / Kg.
Tukda Cutting Machine
(Bulk Feeding)
Tukda Cutting Machine (Bulk Feeding)
Technical Specification
1 HP Motor Single Phase, 1440RPM,50Hz
Production Capacity : 20 – 30 Kg/Hr.
Weight : 90 Kg.
Dimension : L = 22.5” H = 39” W=17”
Power Consumption: Rs.0.50 Paisa / Kg.
Sali Cutting
(Double Feeding Multipal Cutting Machine)
Sali / Sadi Cutting
(Double Feeding, Multiple Cutting Machine)
Technical Specification
1HP Motor Single Phase, 1440 RPM,50Hz.
Production Capacity : 08 – 30 Kg/Hr.
Weight : 200 Kg.
Dimension : L = 40” H = 38” W = 18”
Power Consumption : Rs.0.50 Paisa/Kg.
Semi Automatic
(DoubleFeeding,FadchaCuttingmachi)
Semi Automatic
(Double Feeding, Fadcha Cutting machine)
Technical Specification
1.5 HP Motor Single Phaase,1440 RPM, 50Hz
Production Capacity : 15 – 20 Kg/Hr.
Weight : 110 Kg.
Dimension : L = 21” H=30” W=20”
Power Consumption : Rs.0.50 Paisa / Kg.