Transcript EZ-7 Presentation - Wabash National Corporation

Wabash National Corporation
EZ-Modular 7 Way
1
Wiring Stays Undisturbed Inside the Box.
2
EZ-7™ Modular 7 Way
Pay back immediately due to change but 7-way in 60 seconds
Multiple Payback at First Change out - 1 minute vs. 1 hour









3
Accommodates any Wiring Scheme as
Opposed to Single Molded Plug Design.
Solid Through Bolt Construction – No
Stud Pull Out!
Incorporates Two Cable Inlets at
Bottom, Allowing Additional Electronic
Device Wiring.
Wiring Stays Enclosed and
Undisturbed During Change.
Weather Resistant, Non-corrosive,
Reinforced Nylon Housing.
Anodized Aluminum Cover for
Longevity and Gasket Compression.
Gasket – Seals and Compresses Card
Slots.
Standard Mounting Hole Pattern for
Easy Retrofit.
Can be recess mounted.
EZ-7™ Modular 7 Way
Saves Maintenance Cost and Trailer Downtime -
Pay back immediately due to change but 7-way in 30 seconds

Quick Change Connector – Plugs
in and Secures with two Nuts.

Solid Pin in Place of Split Pin –
Split Pin Breakage Due to
Spreading Pins for Contact.

Connector Available in Noncorrosive, Non-metal or metal.
4
EZ-7™ Modular 7 Way
Saves Maintenance Cost and Trailer Downtime -
Pay back immediately due to change but 7-way in 30 seconds
7-way Maintenance Downtime is
Eliminated.
No More “Spaghetti Bowl” of Wires
– Wiring on Studs in the Box
Remain Stationary.
No Possibility of Receptacle Repair
Resulting in Misrouted Wires – Color
Coded and Stamped with Color
Name.
Future Expansion for Circuit Boards.
Long Terminal Posts for Multiple
Connections.
Easy Repair of Terminal Block –
Remove two Screws.
Plated Brass Buss Bar with Stainless
Steel Structural Springs.







5