Why Use EZ Form Hose?

Download Report

Transcript Why Use EZ Form Hose?

Parker Industrial Hose Division’s
E-Z Form Hose – CAT presentation
The Industrial
Hose
Division Presents:
Why Use E-Z Form Hose?
The Industrial Hose Division’s E-Z
Form PPT consist of the following:
•Why E-Z Form hoses were
designed
•Where do you use E-Z Form hoses
•Value Proposition of E-Z Form
•Product specifications, systems,
and information
•Markets, equipment, and
applications
•Couplings and attachment methods
•OEMs that have spec’d in E-Z
Form
•E-Z Form Testimonials
Why E-Z Form hose was designed?
Due to Parker being the premier motion control systems supplier there
has been a constant stream of requests for formed hoses from Parker’s
OEM customers. Instead of copying a commodity item, the Industrial
Hose Division created a unique family of products that services our
customer’s needs and allowed Parker to create a system that would
revolutionize the OEM world.
Thus the creation of E-Z Form hose! An incredible hose design that
allows for a straight length of hose to be bent into unique configurations
and bend radius’ never seen from a standard hose, which normally could
only be achieved by formed hoses.
The picture is 1 ½” id E-Z Form Hose
What makes E-Z Form hose special?
It is all about the Groove!
The special process to cut the grooves in the cover of the hose allows the E-Z
Form hose to bend in configurations like no other hose. Twist it, bend it,
and just try to kink it.
The design of this hose allows the OEM customer to easily design prototype
equipment without the expense of formed hose tooling and long lead times
to develop prototypes. The E-Z Form is ready and on the shelf!
In regards to the MRO side of business, there is no need for stocking various
lengths and configurations of formed hoses, one hose does it all, E-Z Form,
which is offered in various sizes to service many applications and markets.
These picture are the same 1 ½” id E-Z Form Hose
Where do you utilize E-Z Form hose?
Where there is tight routing issues for coolant, hydraulics, power steering, and fuel fill
hose applications
In place of formed hose applications or routings with multiple connections systems
Parker’s Value Proposition for E-Z Form
Provides Costs Savings $$$ by
•Reduces inventory and storage of formed hoses
•Eliminates prototype tooling costs
•Eliminates production tooling costs
•Reduces labor
•Reduces costs when replacing multi-component systems
Provides Time Reductions by
•Reduces engineering design time
•Reduces production part lead times
•Simplifies hose routing issues
Reduces Warranty issues by
•Reduces kinking and tight routing problems
•Reduces leak points
Parker’s E-Z Form Family
Coolant
Series 7395 E-Z Form GS
Hydraulic Return and Fuel Fill
Series 7219 E-Z Form MP
Power Steering Suction/Return Series
Series 7399 E-Z Form HT
New
Series 7219 and 7395
E-Z Form Size and
Length Offerings
From ½’ thru 4” IDs
Series 7219 and
7395 E-Z Form
Size and Length
Offerings
Continued
New
13
Parker’s Latest Addition
E-Z Form HT
E-Z Form HT
Series 7399
Offered in ½” thru 1” id
Rated to -40°F to +302°F
150 psi wp with 4:1
Designed for High Temperature
Hydraulic Suction/Return Line
• The TARGET is Formed Hoses or tight
routings that standard hydraulic
suction/return line hoses can not achieve
• Crimped with HY series couplings
•
•
•
•
14
The E-Z Form Systems Solution
Parker’s disciplined approach has qualified E-Z Form hoses with
multiple styles of crimp fittings in popular sizes and terminations.
These crimp specifications are for sizes ½” thru 2”. For larger hose
sizes where crimp couplings are not readily available, E-Z Form hoses
are supple enough to easily accept beaded ends secured with constant
tension clamps.
The Industrial Hose Division has also developed Parkrimp dies for the
popular sizes of E-Z Form hoses, which are shown below to
supplement existing specifications for Parker adjustable crimpers.
Please permanent crimp specifications refer to CrimpSource at
www.safehose.com.
Applications
E-Z Form HT
Series 7399 Application Replacement of Formed Hose
Before
17
After
Coolant Applications
Every water cooled engine requires a coolant hose and
Parker’s Series 7395 E-Z Form GS is the hose to use!
Markets that E-Z Form GS
services are:
•
•
•
•
•
•
•
•
•
•
Transportation
Military
Refuse
Material Handling
Forestry
Agriculture Equipment
Aerial Equipment
Construction Equipment
Heavy Equipment
Municipalities
Coolant Applications
If the engine has a radiator then there is a need for
Parker’s Series 7395 E-Z Form GS!
Some of the places that E-Z Form GS
has already been utilized are:
Engines Coolant Hose Connections
for:
•
•
•
•
•
•
•
•
•
•
•
•
•
Class 5-8 Trucks
Buses
Tractors
Harvesters
Excavators
Graders
Wheel Dozers
Ag Sprayers
Fertilizer Trucks,
Skid Steer Loaders
Paving Equipment
Compactors
and Many, Many, More!
Before
After
Oil and Petroleum Applications
Parker’s Series 7219 E-Z Form MP
Where is E-Z Form used? It is used to replace formed hydraulic
(NBR) hoses, or placed in tight routing applications where standard
100R4 will kink, and used as fuel filler neck hose.
What markets does E-Z Form MP serve?
•
•
•
•
•
•
•
•
•
•
Turf Care
Power Generation
Military Vehicle
Refuse
Material Handling
Forestry
Agriculture Equipment
Aerial Equipment
Construction Equipment
Heavy Equipment
Oil and Petroleum Applications
Parker’s Series 7219 E-Z Form MP
What makes E-Z Form hose special? This hose will not kink! It is a
uniquely designed hose that will route into areas that only formed
NBR hoses fit.
What is some of the equipment has E-Z
Form MP has already been used on?
• Skid Steer Loaders
• Refuse Trucks
• Military Vehicles
• Excavators
• Graders
• Wheel Dozers
• Trenchers
• Paving Equipment
• Compactors
• Cranes
• Mini Excavators
• Tractors
• Harvesters
• and Many, Many, More!
Before
After
Couplings
and
Attachments
Parker Industrial Hose Division
HY Series Crimp
Specifications and Dies
Parker Industrial Hose Division
43 Series Crimp
Specifications and Dies
Parker Industrial Hose Division
Constant Tension
Clamp
T-bolt Clamp
Since this is a suction or low pressure application, customers
typically push the E-Z Form hose over a beaded end and utilize
either a constant tension or a t-bolt style clamp.
Parker Industrial Hose Division
OEMs that have spec’d in Parker’s E-Z Form
•CAT (1E spec written for all series)
•Deere
•NABI
•Blue Bird
•Terex
•DTNA (Freightliner)
•Toro
•Excel
•JCB
•Grove
•Oshkosh Truck
•MTD
•And more coming!
EZ Form Hose Testimonials
One of our salesman calls on an OEM customer that makes road
paving equipment. They were having problems with a competitors
radiator hose that was kinking at the connection due to the sharp
bend radius needed for the application. Parker solved the customer’s
problem by using the 7395 EZ Form.
The following pictures are the before and after EZ Form.
Before
After
EZ Form Hose Testimonials
One of our OEM customers is utilizing 5/8” and ¾” E-Z Form GS
coolant hose to replace long lengths of copper tubing on buses that
transfers coolant. The customer has determined that using E-Z Form
saves money by reducing labor to braze and bend the copper tubing
plus reducing leak points throughout the cooling system.
EZ Form Hose Testimonials
One of IHP’s product managers was having a meeting with one of our
Parker Full Line Distributors. During the meeting we showed them
samples of the ¾” series 7219 EZ Form MP hose. The VP of Sales
stopped the meeting, took the sample, grabbed his cell phone and
called one of his OEM customers. He asked the engineering manager
to gather all the engineers for a meeting because he had just found a
solution to a hose kinking problem they had been experiencing for 3
years. That afternoon Parker’s E-Z Form series 7219-0750025 was
specified on the OEM’s print and we are now selling 40,000 ft. per
year of this part to the customer.