BIM from Concept to Completion Presented by
Download
Report
Transcript BIM from Concept to Completion Presented by
BIM from Concept to Completion
Presented by:
Darren R. Hartman, P.E., LEED AP (Vice President)
Thornton Tomasetti
November 16, 2010
Who We Are
Our Guiding Principles
Our Mission
To collaborate with clients to create the best building solutions for the
entire building lifespan.
Our Values
Collaboration: Listening is not a spectator sport. We seek out ideas and
goals and build upon them.
Creativity: We are driven by original ideas.
Commitment to excellence: Attention to the details, while keeping our
eye on the big picture.
Caring: Doing the right thing for our clients, our colleagues and our
communities.
Our Vision
Always reinvent how buildings are imagined - and built.
Where We Work
12 U.S. Offices,
Abu Dhabi, Dubai, London, Moscow, Shanghai, Hong Kong
Our Market Sectors
Our Practice Areas
Building Structure
Aviation & Transportation
Commercial
Cultural & Institutional
Education
Healthcare
Hospitality & Gaming
Parking
Residential
Special Structures
Sports & Entertainment
Building Skin
Building Performance
The BIM Concept
The Current BIM Concept
Who’s Involved?
Architect
Engineer
Mechanical
What’s Involved?
Clash Detection
3-Dimensional
Modeling
Coordination of
Mechanical Systems
It is a Linear Process
Our BIM Concept
• BIM is more than just clash
checking and 3D modeling.
• This is a process that’s
maintained throughout the entire
project.
• By doing more of the process,
we establish expertise for each of
the disciplines.
• We can do the work ourselves
or we can coordinate the work
more effectively.
Share and Deliver
Owner
MEP
Architect
Engineer
Contractor
BIM
Subcontractors
Fabricators
Time to embrace model sharing and designer/contractor collaboration
Construction Support Services
Integrated Modeling Services
Construction Support Services
Integrated Modeling Services
Detailing During Design Using Tekla
Phase I (Mill Order Model)
Phase II (Connected Model)
Phase III (Drawing Extraction)
Precast and Cast-in-Place
Integrated Modeling Services
Steel Detailing During Design Using Tekla Structures
Integrated Modeling Services
Phase I – “Mill Order Model”
Main framing members in
Tekla
Digital model used directly
by contractors
– Advanced Bill of
Materials (ABM)
– More accurate material
take off for bid
– Reduce overall
schedule
Integrated Modeling Services
Phase I – Design Drawings
Integrated Modeling Services
Phase II – “Connected Model”
Selected connections completely
detailed in Tekla
Lateral system major details
Long-span major details
Others are project-specific
Connection designs in 3D model
Fabrication starts sooner
Design intent clear
Project complexity clear
Owner gets digital 3D model file
Ready for steel fabricator detailers
to create shop drawings
Integrated Modeling Services
Phase II – Design Drawings
Integrated Modeling Services
Phase III – “Drawing Extraction”
Drawing Extraction
Often delegated to fabricator
Then out-sourced -- Low cost labor
Thornton Tomasetti can/should
self-perform on select projects
Performing here can speed schedule
on some projects
Shop drawings complete at Award
CNC Downloads readily available
Speeds Shop Drawing Review
Integrated Modeling Services
Phase III – Drawing Extraction
Integrated Modeling Services
Precast and Concrete Modeling
As Part of Design Projects (Add service or basic fee)
Partial reinforcement detail of congested areas
Deliver detailed reinforcing details as design
deliverables
Required on several current international projects
Stand Alone Service to Contractors
Design and detail precast
Integrated Modeling Services
Precast and Concrete Modeling
Model different structural elements
Enhances clash detection
Better trade coordination
Full profile element models
See clearances and connections
Single model: Steel, concrete, wood
Coordinating for much more
intuitive design
Becomes basis for RFID control
Integrated Modeling Services
Precast and Concrete Modeling
The use of Tekla-driven Building
Information Modeling (BIM)
allows for enhanced design and
visualization of complex
structural conditions
Model (or components of) can be
delivered to reinforcement subs
that embrace technology
Integrated Modeling Services
Precast and Concrete Modeling
The Production Model
The BIM Model
The Production Model
One model design process
One model to carry through the
detailing
One location for all of the
information
One model to maintain and
coordinate
One Model Design Process
One model is used to house
the geometry as a master
model
Pieces of this model are
used for analysis
Analysis results are
incorporated into the master
model
Trades are coordinated with
exports of the master model
One Location for the Information
All of the history and the
data about a member is in
the model
Size, location, end loads,
camber, RFI and anything
about a specific member
is located in the model
The data is maintained
and expanded throughout
the process
One Model to Maintain and Coordinate
No more making sure the
models match
This reduces hours of
review and copy check
time
Exports from one model
to other trades ensures
that all trades get up to
date information
Case Study:
Washington Nationals Park
Design/Build (IPD Approach)
Change in Ownership
3 Months – Start to Mill Order
Architect Early Sign-off
26 Months – Concept to
Handover
Result: Team Wins!
Nationals still lose…
Case Study:
Washington Nationals Park
Case Study:
Yankee Stadium
Design-Bid-Build, DesignAssist
Structure is Iconic
Navisworks – Works!
Client – New “Standard”
Result: Team Wins!
27th World Series Winners
Case Study:
Yankee Stadium
Yankee Stadium – Iconic Frieze
Case Study:
Yankee Stadium
Courtesy : Turner
Yankee Stadium – BIM Coordination
Case Study:
New Meadowlands Stadium
Design/Build, Design-Assist
27,000 Tons of Steel
27 Months – Schematic to
Topping Out
3 - 6 Months Ahead of
Schedule
Result: Team Wins!
Case Study:
New Meadowlands Stadium
Case Study:
Kauffman Stadium Scoreboard
Design-Bid-Build
3 Month Schedule
Bust
Delivery – Shop
Drawings
Result: Team Wins!
Case Study:
Kauffman Stadium Scoreboard
Case Study:
Cathedral of Hope
Design-Bid-Build
Only 60 Tons of
Steel
Complex Geometry
Result: Team Wins!
Case Study:
Cathedral of Hope
Case Study:
Morgan State University
Design-Bid-Build
Concrete Detailing
Building Façade
Modeling
Result: Team Wins!
Case Study:
Quantico Aircraft
Hangar
Design/Build
Case Study:
Quantico Aircraft Hangar
Thank you!
Darren R. Hartman, P.E., LEED AP
Thornton Tomasetti, Inc.
912 Broadway Blvd., Suite 100
Kansas City, MO 64105
T 816.221.7771
F 816.221.7787
www.ThorntonTomasetti.com