Transcript Data sheet

ENTERPRISE PLASMA 160HF 230-400V
Overview
ENTERPRISE PLASMA 160HF 230-400V
cod. 815870
Chopper, compressed air plasma cutting system, with high frequency HF striking of pilot arc.
Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, aluminium, copper, brass.
Possibility to use long nozzles.
Features:
- high stability of cutting current
- warning led for torch under voltage, air fault, protections
- control of torch cooling
- visualization of air pressure
- possibility to cut on grids with automatic restart of pilot arc
- storage of the last 10 alarms
- thermostatic, overvoltage, undervoltage, overcurrent, torch shortcircuit, phase failure protections.
Complete with torch.
3 PH 230V-400V
HF STRIKING
CE MARKING
CODE 815870
MAINS VOLTAGE 230 / 400 V
MAINS FREQUENCY 50 - 60 Hz
CURRENT RANGE 20 - 160 A
MAX CURRENT 160 A - 40 %
MAX NO LOAD VOLTAGE 260 V
MAX ABSORBED POWER 25 kW
EFFICIENCY 86 %
POWER FACTOR (cosphi) 0,9
MAX CUTTING THICKNESS 45 mm
COMPRESSED AIR CAPACITY 200 L/
min
COMPRESSED AIR PRESSURE 4÷5 bar
PROTECTION DEGREE IP22
DIMENSIONS 84 - 45,3 - 80 cm
WEIGHT 123 kg
EAC CERTIFICATION
Technical data
Telwin SPA | Via della Tecnica 3 - 36030 VILLAVERLA (VI) ITALY - Tel. +39-0445-858811 - Fax +39-0445-858800/801 - www.telwin.com
Apr 24, 2017
1
ENTERPRISE PLASMA 160HF 230-400V
EAN CODE 800489786230 9
PIECES/PALLET 3 pz/pallet
Included Accessories
CABLE 25 MMQ 5 M - 123469
PLASMA TORCH 6M - 722332
TOLEDO 300 WORK CLAMP - 712231
Telwin SPA | Via della Tecnica 3 - 36030 VILLAVERLA (VI) ITALY - Tel. +39-0445-858811 - Fax +39-0445-858800/801 - www.telwin.com
Apr 24, 2017
2