First progress report.pptx
Download
Report
Transcript First progress report.pptx
Huse, Stephen
Using RPI Project template
Transferred and expanded introduction,
historical review, and Theory
Added ABAQUS procedure
Have a working thermal ratcheting model
Transferred information into the project
template
Added captions for figures, tables, and
equations
Added list of symbols, and updated ToC, and
list of figures and tables
Used problem description for intro
Used background for historical review and
theory
Expanded historical review and theory
Defined card functions for the ABAQUS file
Provided input text in the appendices,
minimized in two columns.
This section will need updating
The pipe model works, and shows
accumulating plastic strain
The valve model will be documented in the
main report and is working.
Some trouble graphing strain when nonlinear geometry was used. Turning it off
works.
2010 ASME boiler & pressure vessel code an international
code. (2010). New York, NY: American Society of Mechanical
Engineers.
ABAQUS (Version 6.13) [Software]. (2013). Providence, RI:
Dassault Systèmes Simulia Corp.
Bree, J. (1967). Elastic-plastic behaviour of thin tubes subject to
internal pressure and intermittent high-heat fluxes with
application to fast nuclear reactor fuel elements. Journal of Strain
Analysis, (2), 226-38.
Bari, S. (2001). Constitutive Modeling for Cyclic Plasticity and
Ratcheting.
Cailletaud, G. (2003). UTMIS Course 2003 – Stress Calculations
for Fatigue - 6. Ratcheting. Ecole des Mines de Paris: Centre des
Materiaux.
Kreith, F. (2000). The CRC handbook of thermal engineering.
Boca Raton, Fla.: CRC Press.
Kreith, F. (1965). Principles of heat transfer. Second edition.
Scranton, Pa.: International Textbook.