Transcript (TIs) of this module in CCNA version 3.1
CCNA 2 v3.1 Module 1 WANs and Routers
© 2004, Cisco Systems, Inc. All rights reserved.
1
Purpose of This PowerPoint
•
This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1.
•
It was created to give instructors a PowerPoint to take and modify as their own.
•
This PowerPoint is: NOT a study guide for the module final assessment.
NOT a study guide for the CCNA certification exam.
•
Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.
© 2004, Cisco Systems, Inc. All rights reserved.
To Locate Instructional Resource Materials on Academy Connection:
•
Go to the Community FTP Center to locate materials created by the instructor community
• • • •
Go to the Tools section Go to the Alpha Preview section Go to the Community link under Resources See the resources available on the Class home page for classes you are offering
• •
Search http://www.cisco.com
Contact your parent academy!
© 2004, Cisco Systems, Inc. All rights reserved.
Objectives
© 2004, Cisco Systems, Inc. All rights reserved.
Introduction to WANs
•
A WAN is a data communications network that spans a large geographic area such as a state, province, or country.
© 2004, Cisco Systems, Inc. All rights reserved.
WAN Devices
© 2004, Cisco Systems, Inc. All rights reserved.
WAN Services
© 2004, Cisco Systems, Inc. All rights reserved.
Data Link Encapsulations
© 2004, Cisco Systems, Inc. All rights reserved.
Internal Configuration Components
© 2004, Cisco Systems, Inc. All rights reserved.
Routers Connected by WAN Technologies
© 2004, Cisco Systems, Inc. All rights reserved.
Path Determination
© 2004, Cisco Systems, Inc. All rights reserved.
Internetwork Routers
•
Any internetwork must include the following: Consistent end-to-end addressing Addresses that represent network topologies Best path selection Dynamic or static routing Switching
© 2004, Cisco Systems, Inc. All rights reserved.
Academy Approach to Labs
•
In the academy lab, all the networks will be connected with serial or Ethernet cables and the students can see and physically touch all the equipment.
•
Devices that make up the WAN cloud are simulated by the connection between the back-to-back DTE-DCE cables.
© 2004, Cisco Systems, Inc. All rights reserved.
Router Internal Components
© 2004, Cisco Systems, Inc. All rights reserved.
Router Internal Components
© 2004, Cisco Systems, Inc. All rights reserved.
Internal Components of a 2600 Router
© 2004, Cisco Systems, Inc. All rights reserved.
External Connections on a 2600 Router
© 2004, Cisco Systems, Inc. All rights reserved.
Router External Connections
© 2004, Cisco Systems, Inc. All rights reserved.
Computer or Terminal Console Connection
© 2004, Cisco Systems, Inc. All rights reserved.
Modem Connection to Console or Auxiliary Port
© 2004, Cisco Systems, Inc. All rights reserved.
Console Port Connections 1.
2.
3.
4.
Configure terminal emulation software on the PC for the following: The appropriate com port 9600 baud 8 data bits No parity 1 stop bit No flow control Connect a rollover cable to the router console port (RJ-45 connector).
Connect the other end of the rollover cable to the RJ-45 to DB-9 adapter Attach the female DB-9 adapter to a PC.
© 2004, Cisco Systems, Inc. All rights reserved.
Eight-Pin Connections for Cisco 2600 Series Routers
© 2004, Cisco Systems, Inc. All rights reserved.
WAN Types
© 2004, Cisco Systems, Inc. All rights reserved.
Router Serial WAN Connectors
© 2004, Cisco Systems, Inc. All rights reserved.
DCE Serial Connections
© 2004, Cisco Systems, Inc. All rights reserved.
Summary
© 2004, Cisco Systems, Inc. All rights reserved.